Table of Contents
Advertisement
Check intermediate hangers and bends:
- there must be no plastic deformation,
- presence and intactness of the plastic guides (depending on type), check if the nuts or screws
are tightly screwed on, if any deformation is visible on the bend and also check the cable tensi-
on on both sides of the bend!
Condition of the standard and overhead shuttle: The shuttle and especially its movable com-
ponents (rollers, locking pin, locking plate, half shells unlock key, etc.), must be clean and work
smoothly
For inspections and repairs, we recommend the use of the list at the end of this manual.
4.4 Cleaning, transportation and storage
contribute to the performance of its vital safety function. Periodically clean system components to
remove any dirt, paint, corrosives, contaminants, or other materials that may have accumulated.
Don't use aggressive chemicals such as alcohol, acids or lyes for cleaning! We recommend the use of
soapsuds.
When the Söll Xenon shuttle is not in use, store in a clean, dry, ventilated area, free of exposure to
fumes, corrosive elements and environmental effects.
Ensure that the device is transported in a clean, dry, ventilated area, free of exposure to fumes,
corrosive elements and environmental effects.
www.fall-protection.com
15
Advertisement
Table of Contents
