Table of Contents
Advertisement
To configure IPv4&IPv6 via Web interface:
1. Click Network Basic Internet Port
2. Select IPv4&IPv6 for Internet Port
3. Click
for the setting.
Note:
Wrong network parameters may result in inaccessibility of your phone and may also have an impact on your network performance.
For more information about these parameters, contact your system administrator.
PC Port
Three modes for PC port: bridge, connect to Expansion Module and router.
To configure PC Bridge via Phone interface:
1. Press Menu Settings Advanced Setting (password: admin) Network PC Port Bridge mode.
2. Click Save
3. Click the OK button, then the phone will reboot.
To configure PC router via Phone interface:
1. Press Menu Settings Advanced Setting (password: admin) Network PC Port Router mode.
2. Enter the IP, Netmask and DHCP server
3. Click Save
4. Click the OK button, then the phone will reboot
To configure PC, Connect to Expansion Module via Phone interface:
1. Press Menu Settings Advanced Setting (password:
2. Click Save
3. Click the OK button, then the phone will reboot
To configure Bridge via Web interface:
1. Click Network PC Port
2. Select As Bridge
3. Click
and the phone will reboot automatically
To configure Router via Web interface:
1. Click Network PC Port
2. Select As Router
3. Fill the IP address and other necessary information.
4. Click
and the phone will reboot automatically
admin
) Network PC Port Connect to Module.
Advertisement
Table of Contents
