OMV-VX Series Outdoor Visual Verification Detector - Installation Instructions
General
The OMV-VX series, visual verification outdoor detectors, are
wireless, battery operated, motion activated outdoor camera
designed for use with the Videofied security system.
Models
OMV-VX200 : 868 MHz (Europe, Africa, Asia)
OMV-VX601 : 915 MHz (USA, Canada, South America)
OMV-VX702 : 920 MHz (Australia, South America)
Features
Powered by 3 Lithium batteries for extended battery life.
•
4 infrared LEDs for night vision.
•
Transmits check-in/status signal every 8 minutes.
•
12 m (40 ft.) by 90 degree flexible detection pattern
•
adjustable to 5 ranges
SMDA Logic for advanced temperature compensation and
•
environmental noise immunity.
• Easy Masking for over spill prevention
• Double Conductive Shielding against bright light
disturbance
Battery box
Face cover
Cover unit
OMV-VX Series Parts Assembly
Use for masking optional area
Apply from the inside on a lens
Masking seal x 2
Options
( White )
( Silver )
( Black )
OMV-VX Accessories
Flange
Mounting plate
Back box
Main unit
OMV-003-V0
For wall mounting
Screw (4 × 20 mm)
Screw kit
Optional cover unit
Installation Notes
Symbol
Failure to follow the instructions provided with
Warning
this indication and improper handling may cause
death or serious injury.
Failure to follow the instructions provided with
Caution
this indication and improper handling may cause
injury and/or property damage.
Recommendation
Prohibition
Warning
Do not remove the PCB.
Caution
0.8 – 1.2 m
(2.64 – 3.94 ft)
Parallel
Meaning
Keep product away from
direct splash.
Tilt
OMV-001-V0