hit counter script

Creating A Connection From A Unix Workstation; Fixing Insufficient Colors Problem - Cisco Media Gateway Controller Node Manager Installation Manual

Cisco systems media gateway controller node manager installation guide
Table of Contents

Advertisement

Chapter 2
Installing Cisco MNM
Step 3
From the Method drop-down list, click Broadcast or Direct, and continue with one of the following sets
of steps:
For Broadcast Method
a.
Note
a.
For Direct Method
a.
b.
In either method, an X terminal window opens on the host machine. Start Cisco MNM in the usual
manner (see the
Note
If the Cisco EMF Launchpad displays but appears to be inactive, check for a message box behind the
Launchpad that reads "[T]here are insufficient colors available for Cisco EMF Manager." You can safely
ignore this message and close the message box, or remedy the problem as described in the
Insufficient Colors Problem" section on page

Creating a Connection from a UNIX WorkStation

To connect to Cisco MNM from a remote UNIX workstation, use the following procedure:
Step 1
Open an X terminal window.
Step 2
Use Telnet to connect to the Cisco MNM host.
Enter the following command to change to the Cisco MNM directory:
Step 3
# cd <CEMF_ROOT>/bin
Enter the following command to launch Cisco MNM:
Step 4
# ./cemf session

Fixing Insufficient Colors Problem

You may encounter the "... insufficient colors available for Cisco EMF Manager" problem. To fix this
problem, see the procedure in the "Configuring Reflection X Version 7.20 to Support Cisco EMF Color
Usage" section of the Cisco Element Management Framework Installation and Administration Guide at
http://www.cisco.com/en/US/docs/net_mgmt/element_manager_system/3.2_service_pack_7/installatio
n/guide/3_2p7adm.pdf
OL-18332-04
Enter the host name or the IP address of the XDMCP destination host in the Host name field. Or
choose the XDMCP destination host from the Host name drop-down list.
If you do not know which XDMCP destination host to choose or enter, contact your system
administrator.
Click Connect.
Enter the host name of the XDMCP computer in the Host name field,
Click Connect.
"Starting Cisco MNM" section on page
2-16).
2-19.
Cisco Media Gateway Controller Node Manager Installation Guide
Performing a New Installation of Cisco MNM
"Fixing
2-19

Advertisement

Table of Contents
loading

Table of Contents

Save PDF