Table of Contents
Advertisement
Note
• Attach the embroidery frame to place the
needle plate under the embroidering area
otherwise the embroidery frame hits the
needle plate.
1 Needle plate
• If the outer frame is on top, as shown
below, the embroidery frame is incorrectly
attached.
Insert the embroidery frame until it snaps
d
into place.
1 Make sure that the pins on the left and right arms
of the embroidery frame holder fit into the
positioning slot and hole on the embroidery frame.
Continuing to the embroidering
settings screen
a
Press
.
→ The embroidering settings screen is displayed.
46
8. Specifying
Embroidering Setting
From this screen, the entire pattern can be edited
and embroidering settings can be specified. In
addition, the embroidering position can be
checked and a pattern can be saved for later use.
Embroidering settings screen (For details on the
keys and other information on the screen, refer to
page 68.)
1
2
3
4
5
6
1 Shows the size of the pattern in the pattern display
area.
2 Displays a preview image.
3 Image on the Design Page shows image size,
rotation, number of thread changes and measured
position of image within the embroidery area.
4 Touch for additional editing functions.
5 Returns to the pattern editing screen.
6 Touch to store the pattern in memory.
7 The embroidering area guide in the pattern display
area indicates the size of the embroidery frame
that is actually installed.
8 Touch these keys to specify how the pattern will
be embroidered.
9 Continues to the next screen
0 Touch to check the embroidering area.
In this example, we will not specify any of the
embroidering settings. Continue with the next
operation.
7
8
9
0
Advertisement
Table of Contents
Troubleshooting
