Advertisement
Install the Chassis
Figure 35: NCS-57C3-MOD Ground Lug
1
c) Attach one end of the shelf ground cable (#6 AWG cable) to the grounding cover plate using the specified dual-hole
lug connector.
Step 5
Tighten the pan-head screws to torque value of 11.5 in-lbs (1.3 N-m).
Step 6
Ensure that the lug and cable do not interfere with other equipment.
Step 7
Prepare the other end of the grounding cable and connect it to an appropriate grounding point in your site to ensure
adequate earth ground.
Connect AC Power to the Chassis
Caution
The chassis relies on the protective devices in the building installation to protect against short circuit,
overcurrent, and ground faults. Ensure that the protective devices comply with local and national electrical
codes.
Grounding lug
Connect AC Power to the Chassis
2
Install the Chassis
Pan-head screws
37
Advertisement
