Page 1
SERVICE MANUAL CLP-970 CLP-970M CLP-970C CONTENTS SPECIFICATIONS ................3 PANEL LAYOUT .................. 5 CIRCUIT BOARD LAYOUT ..............7 BLOCK DIAGRAM ................8 DISASSEMBLY PROCEDURE ............9 LSI PIN DISCRIPTION ..............17 IC BLOCK DIAGRAM ................ 22 CIRCUIT BOARDS ................23 TEST PROGRAM ................
Page 2
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC IMPORTANT NOTICE This manual has been provided for the use of authorized Yamaha Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically Yamaha Products, are already known and understood by the users, and have therefore not been restated.
Page 6
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC • Terminal and Jack Panel (31) AUX OUT (R), (L/L+R) (35) HOST SELECT (32) AUX IN (R), (L/L+R) (36) MIDI (IN), (OUT), (THRU) (33) AUX PEDAL (37) PEDAL (34) TO HOST (31) (32) (33) (34) (35) (36) (37) • Floppy disk drive (38) Floppy disk drive (38)
Page 7
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC CIRCUIT BOARD LAYOUT SWX-XG SWX-A SWX-C SWX-E SWX-F to SP Box Ass'y FU120L CN2 CN1 A-JACK MA120 D-JACK CN1 CN8 CN9 CN5 to PN Ass'y Fixed by filament tape NOTE2 to MK Ass'y to PN Ass'y at the side CN1 CN2 Keyboard NOTE1)
Page 9
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC DISASSEMBLY PROCEDURE Music Rest Assembly Music Rest Assembly Lift the music rest assembly slightly and slide it forward and then remove it. (See Fig.1) Speaker Grille Remove two [2] knob bolts marked [2] and remove the speaker grille by pulling it out towards you. (See Fig.2) Make sure to pull the grille forward with equal force, otherwise, it may be cracked.
Page 11
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC [48f] [48f] Panel Assembly [48]: Bind Head Tapping Screw-1 3.5X12 MFZN2BL (EP030340) (Fig. 10) [28] Panel Assembly Remove the music rest assembly. (See procedure 1.) Remove the speaker grille. (See procedure 2.) Turn the speaker box assembly backwards and turn it up. [29] [29] (See procedure 3.)
Page 12
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC PSW Assembly Remove the music rest assembly. (See procedure 1.) Remove the keycover assembly. (See procedure 5.) Remove the panel assembly. (See procedure 6-5.) Remove the screw marked [45b]. The right end block assembly can then be removed. (See Fig. 14) Remove the two [2] screws marked [6].
Page 13
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC FDD Assembly 11-1 Remove the six [6] screws marked [83]. The FDD [83] assembly can then be removed. (See Fig. 15) 11-2 Remove the four [4] screws marked [9]. The FDD cover can then be removed. (See Fig. 16) 11-3 Remove the four [4] screws marked [3].
Page 14
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC Rack Assembly 15-1 Remove the music rest assembly. (See procedure 1.) 15-2 Remove the speaker grille. (See procedure 2.) 15-3 Turn the speaker box assembly backwards and turn it up. (See procedure 3.) 15-4 Remove the keycover assembly. (See procedure 5.) Rack Assembly 15-5 Remove the panel assembly.
Page 15
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC GH keyboard Disassembling the GH Keyboard Assembly After inserting a round stick (Rod: TX000670) between the frame and keys, remove the circuit boards. (See Fig. 29) 18-A AEXL88-L circuit board. Remove the seven [7] screws marked [260A]. The AEXL88L AEXL88H AEXL88-L circuit board can then be removed.
Page 16
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC Assembling the GH Keyboard Hammer, White key 19-A Hammer of White key (Black) Key Place the GH keyboard assembly upside down, insert a hammer assembly into the frame, and put Stopper L88 Slit the stopper L88 on. (See Fig. 32) There are four kinds of hammers that differ in weight.
Page 17
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC LSI PIN DISCRIPTION HD6437043AE00F (XW795A00) CPU DM: IC001 NAME FUNCTION NAME FUNCTION /WRHH HH write DACK0 DMA transfer strobe Data bus /WRHL HL write /CASHH HH Column address strobe PE15 Port E Power supply Ground Data bus Ground Address bus Data bus Power supply Address bus...
Page 18
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC HD64F7045F28 (XV327A00) CPU DM: IC001 NAME FUNCTION NAME FUNCTION /WRHH HH write PE14 LCD data 6 input / output Data bus WRHL PA21 MLAN insert detect PE15 LCD data 7 input / output VCC77 Power supply VSS6 Ground Data bus VSS79 Ground Address bus...
Page 19
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC HG73C205AFD (XU947A00) SWX000 TONE GENERATOR SWX: IC001 NAME FUNCTION NAME FUNCTION Initial clear CMA3 RFCLKI PLL Clock CMA8 Program address bus PLL Control CMA2 AVDD_PLL Power supply read signal AVSS_PLL Ground CMA1 Program address bus MODE0 SWX dual mode high byte effective signal VCC7 Power supply...
Page 20
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC TC160G22AF-1252 (XU135A00) MI2 (MPU Interface 2) DM: IC003 NAME FUNCTION NAME FUNCTION TEST Test pin Power supply Clock XOUT Clock Ground /RESET Reset /MCS Main CPU chip select /MRD Main CPU read /MWR Main CPU write Slave CPU data 0-15 /MIRQ Main CPU interrupt request Main CPU address 0...
Page 21
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC HD63266F (XI939A00) FDC (Floppy Disk Controller) DM: IC002 NAME FUNCTION NAME FUNCTION 8"//5" Data transmission speed /TRKO Track 00 signal XTALSET Clock select /INDEX Index signal /RESET Rest /RDATA Read data input from FDD E//RD Enable/Read XTAL2 Clock RW//WR Read/write/Write EXTAL2 Chip select...
Page 23
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC CIRCUIT BOARDS DM CIRCUIT BOARD to FDD to PNL-CN102 to PNR-CN202 to GH Keyboard not installed Component side Pattern side Note: See parts list for details of circuit board component parts. 2NA-V517300 Note: Model equipped with “A” has no floppy disk drive.
Page 24
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC PNL CIRCUIT BOARD to A-JACK-CN200 to DM-CN8 to PNR-CN203 MASTER VOLUME Component side METRONOME DEMO SONG SELECT TRACK1 TRACK2 EXTRA TRACKS FILE START/STOP SETTING − + SONG BALANCE TRANSPOSE TRANSPOSE STOP START/PAUSE SONG SETTING DOWN − + PNR CIRCUIT BOARD to DM-CN9 to PNL-CN103 Component side...
Page 25
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC AUX OUT AUX IN A-JACK CIRCUIT BOARD SWX CIRCUIT BOARD L/L+R L/L+R Component side to DM-CN10~16 Component side Pattern side A-JACK: 2NA-V493880 2 SWX: 2NA-V517320 2 Pattern side Note: See parts list for details of circuit board component parts.
Page 26
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC D-JACK CIRCUIT BOARD NETWORK CIRCUIT BOARD MIDI to SPEAKER AUX PEDAL TO HOST HOST SELECT THRU to PEDAL From SP L0002 CN002 From MA L0001 to DM-CN4 to DM-CN7 Component side Component side HP CIRCUIT BOARD Pattern side PEDAL CIRCUIT BOARD Soft Pedal Sostenute Pedal PHONES...
Page 27
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC MA120 CIRCUIT BOARD KSN2 CIRCUIT BOARD to DM-CN2 not installed Component side to DM-CN5 Component side FU120L CIRCUIT BOARD PL CIRCUIT BOARD to MA120-CN1 to POWER SW Component side MA120: 2NA-VT14340 1 Component side V-SELECTOR AC INLET FU120L: 2NA-VV65070 1 KSN2: 2NA-V306660 Note: See parts list for details of circuit board component parts.
Page 28
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC TEST PROGRAM 006: Main Ram Chk1 Check the Main RAM. 1. Preparation Check all the RAMs on the buses of the Main CPU. To check the unit using the test program, the following measuring instruments and jigs will be required: Level meter (IHF- C cave) Check the LED display's “Main Ram Chk1 OK”...
Page 29
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC 019: TG F Chk Checks the Sound Source F (Autoscale) (SUB F). Sequentially outputs the sine wave starting from the lower keys by switching the note of the sound source. Checks if there is no noise or abnormal sound. When completing the autoscaling, a note is output when a key is depressed (A certain note is output when a respective note button is pressed).
Page 30
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC 031: Green LED On Check that all panel Green LEDs are lit. Executes the test and check that all panel Green LEDs are lit. 032: ALL LCD On Check that all LCD dots are lit. Executes the test and check that all LCD dots are lit. 033: ALL LCD Off Check that all LCD dots are turned off.
Page 31
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC INSPECTION AUX OUT and PHONES Apply a 1 kHz, - 20 dBm sine wave to the AUX IN L / L + R. Confirm that the output meets the following specifications : AUX OUT L / L + R : - 9 dBm +/- 2 dB AUX OUT R : L / L + R less than - 50 dBm PHONES L :...
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC MAIN UNIT Bottom view Rear view 26 27 28 Top view 2 Top view 1 Side view Screw set list Screw Ref. No Parts No Bind Head Tapping Screw-1 EP030340 Truss Head Tapping Screw-1 EN630190 Pan Head Screw VV040700 Truss Head Tapping Screw-1 EN630230 F2 F5 Bind Head Tapping Screw-1 EP040230...
Page 38
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC PART NO. DESCRIPTION REMARKS PART NO. DESCRIPTION REMARKS QTY RANK QTY RANK REF NO. REF NO. MAIN UNIT CLP-970/CLP-970C End Block Assembly RIGHT CLP-970M/CLP-970AM(V530910) Main Unit CLP-970 J (V498280) End Block Assembly RIGHT CLP-970C/CLP-970AC (V559470) VU431800 Main Unit CLP-970 U (V498350) Keyboard Assembly A88 K6...
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC SIDE BOARD ASSEMBLY PART NO. DESCRIPTION REMARKS QTY RANK REF NO. SIDE BOARD ASSEMBLY CLP-970/CLP-970M/CLP-970C CLP-970A/CLP-970AM CLP-970AC V5544800 Side Board Assembly LEFT CLP-970/CLP-970A V5544900 Side Board Assembly LEFT CLP-970M/CLP-970AM V5545000 Side Board Assembly LEFT CLP-970C/CLP-970AC Side Board LEFT CLP-970/CLP-970A (V616330) Side Board LEFT CLP-970M/CLP970AM (V616340)
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC END BLOCK ASSEMBLY End Block Assembly (R) End Block Assembly (L) Side view Top view PSW Assíy PART NO. DESCRIPTION REMARKS QTY RANK REF NO. END BLOCK ASSEMBLY CLP-970/CLP-970M/CLP-970C CLP-970A/CLP-970AM CLP-970AC LEFT CLP-970/CLP-970A (V533560) End Block Assembly LEFT CLP-970M/CLP-970AM(V533570) End Block Assembly End Block Assembly LEFT...
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC JACK UNIT Front view Top view PART NO. DESCRIPTION REMARKS QTY RANK REF NO. JACK UNIT CLP-970/CLP-970M/CLP-970C CLP-970A/CLP-970AM CLP-970AC Jack Unit (V582150) Angle, Jack (V582140) V 5 0 2 7 2 0 0 Circuit Board D-JACK V 5 2 7 6 1 0 0 Circuit Board A-JACK EP600190...
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC FLOPPY DISK DRIVE ASSEMBLY Note) Model equipped with "A" has no floppy disc drive. PART NO. DESCRIPTION REMARKS QTY RANK REF NO. FLOPPY DISK DRIVE ASSEMBLY CLP-970/CLP-970M/CLP-970C Floppy Disk Drive Assembly (V499740) V4998200 FDD Cover V5667800 Floppy Disk Drive (BL 1M/2M) 359M3 EG330150 Bind Head Screw...
Page 60
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC DESCRIPTION REMARKS PART NO. REF NO. QTY RANK UB045100 C109 Monolithic Ceramic Cap. F 0.1 50V Z UB013390 C110 Monolithic Ceramic Cap. B 3900P 50V K UB013180 C111 Monolithic Ceramic Cap. B 1800P 50V K UB052180 C112 Monolithic Ceramic Cap. SL 180P 50V J UB052150 C113...
Page 61
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC PART NO. DESCRIPTION REMARKS QTY RANK REF NO. XE518A00 IC100 UPC4574G2 OP AMP XT131A00 IC140 LA6517M-TE-R OP AMP VS115400 JK500 Phone Jack LGR4609-7000 AUX IN L/L+R VS115400 JK510 Phone Jack LGR4609-7000 AUX IN R VS115400 JK520 Phone Jack LGR4609-7000 AUX OUT L/L+R VS115400 JK530...
Page 71
CLP-970/CLP-970C/CLP-970M/CLP-970A/CLP-970AC/CLP-970AM OVERALL CIRCUIT DIAGRAM (DM, SWX, A-JACK, D-JACK) SWX-XG,A,C,E,F : installed : not installed) DECODER FLASH ROM WAVE ROM 1 WAVE ROM 3 to PNL-CN102 to C5 to B2 to H5 to C2 to C2 EPROM TG SWX to B2 to C2 to B2 WAVE ROM 2...
Page 72
CLP-970/CLP-970C/CLP-970M/CLP-970A/CLP-970AC/CLP-970AM OVERALL CIRCUIT DIAGRAM(PNL, PNR, HP, PL, PEDAL, FU120L, MA120, KSN2, AEXL-88H, AEXL-88L) MA120 to FDD FU120L MODEL to A-JACK-CN200 REGURATOR to DM CN2 to DM-CN8 MODEL NON POLARIZED POLARIZED NON POLARIZED NON POLARIZED POWER AMP Not installed Not installed Not installed...