Table of Contents
Advertisement
EAS21900
REMOVING THE FRONT WHEEL
1. Stand the vehicle on a level surface.
EWA13120
WARNING
Securely support the vehicle so that there
is no danger of it falling over.
2. Remove:
• Front brake caliper
TIP
Do not apply the brake lever when removing
the brake caliper.
3. Elevate:
• Front wheel
TIP
Place the vehicle on a suitable stand so that
the front wheel is elevated.
EAS21910
DISASSEMBLING THE FRONT WHEEL
1. Remove:
• Oil seals
• Wheel bearings
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Clean the outside of the front wheel hub.
b. Remove the oil seals "1" with a flathead
screwdriver.
TIP
To prevent damaging the wheel, place a rag "2"
between the screwdriver and the wheel sur-
face.
c. Remove the wheel bearings "3" with a gen-
eral bearing puller.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS21920
CHECKING THE FRONT WHEEL
1. Check:
• Wheel axle
Roll the wheel axle on a flat surface.
Bends → Replace.
EWA13460
WARNING
Do not attempt to straighten a bent wheel
axle.
2. Check:
• Tire
• Front wheel
Damage/wear → Replace.
Refer to "CHECKING THE TIRES" on
page 3-17 and "CHECKING THE
WHEELS" on page 3-17.
3. Measure:
• Radial wheel runout "1"
• Lateral wheel runout "2"
Over the specified limits → Replace.
Radial wheel runout limit
1.0 mm (0.04 in)
Lateral wheel runout limit
0.5 mm (0.02 in)
4-9
FRONT WHEEL
Advertisement
Table of Contents
Troubleshooting
