Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZCG62256
Summary of Contents for Zanussi ZCG62256
- Page 1 User Manual Cooker ZCG62256...
-
Page 2: Table Of Contents
Children shall not carry out cleaning and user maintenance of • the appliance without supervision. General Safety Only a qualified person must install this appliance and replace • the cable. This appliance is intended for use up to an altitude of 2000 m • above sea level. www.zanussi.com... - Page 3 Ensure that the appliance is switched off before replacing the • lamp to avoid the possibility of electric shock. If the mains power supply cable is damaged, it must be • replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard. www.zanussi.com...
-
Page 4: Safety Instructions
• Make sure that the parameters on the rating • This appliance is not connected to a device, plate are compatible with the electrical which evacuates the products of ratings of the mains power supply. combustion. Make sure to connect the www.zanussi.com... - Page 5 Contact the – do not put water directly into the hot Authorised Service Centre. appliance. • Be careful when you remove the door from the appliance. The door is heavy! www.zanussi.com...
-
Page 6: Product Description
• The type of light bulb or halogen lamp used Authorised Service Centre. for this appliance is only for household • Use original spare parts only. appliances. Do not use it for house lighting. Product description Cooker specification Check the table to see your appliance's detailed specification. www.zanussi.com... - Page 7 General overview Button for the turnspit Button for the spark generator Knob for the Minute Minder Knob for the grill Knob for the oven functions Button for the lamp Knobs for the hob Grill Lamp Turnspit hole Shelf positions www.zanussi.com...
-
Page 8: Before First Use
Let the oven cool down. Dampen a soft cloth Put the accessories back to their initial position. with warm water and a little mild washing-up liquid and use this to clean the oven cavity. Preheating Preheat the empty appliance to burn off the remaining grease. www.zanussi.com... -
Page 9: Hob - Daily Use
Do not keep the knob pushed for pans from the burner. more than 15 seconds. If the burner does not light after 15 seconds, release the knob, turn it into the off position and try to light the burner again after minimum 1 minute. www.zanussi.com... -
Page 10: Hob - Hints And Tips
Clean the hob prevent the hob top from with a moist cloth and non-abrasive damage. detergent. After cleaning, wipe the hob dry 2. The enamel coating occasionally can have with a soft cloth. rough edges, so be careful when you wash www.zanussi.com... -
Page 11: Oven - Daily Use
When using the oven the lid has to button push and hold the button . At be opened to avoid over-heating. the same time turn the knob for the oven functions counterclockwise to the maximum heat settings and push it to www.zanussi.com... - Page 12 Control the flame trough the holes in the bottom Turning off the grill burner of the oven. To put out the flame, turn the knob to the off Turning off the oven burner position To put out the flame, turn the knob to the off position www.zanussi.com...
-
Page 13: Oven - Clock Functions
3. Put the baking tray on the lowest shelf level. Make sure it does not touch the back wall of the 4. Snap out one end of the support hook from oven. the oven ceiling A and let it hang on the other end. www.zanussi.com... -
Page 14: Oven - Hints And Tips
With this system you can cook in a Baking steamy environment and keep the food soft • Your oven may bake or roast differently to inside and crusty outside. It decreases the the oven you had before. Adapt your usual www.zanussi.com... - Page 15 1) Preheat the oven for 10 minutes. Meat & Poultry Food Quantity (kg) Temperature Time (min) Shelf position (°C) Sheep 1.5 - 2.0 90 - 120 Chicken 1.0 - 1.8 100 - 110 Duck 1.2 - 1.8 80 - 90 www.zanussi.com...
- Page 16 0.6 - 1.0 20 - 25 Flat cake 1.2 - 2.0 25 - 30 2 and 4 Sponge cake 1.0 - 1.5 85 - 90 Feter Mshalted 1.2 - 1.5 40 - 45 Salty cake 1.0 - 1.2 50 - 60 www.zanussi.com...
-
Page 17: Oven - Care And Cleaning
• To clean metal surfaces, use a dedicated edged objects or a dishwasher. It can cause cleaning agent. damage to the nonstick coating. • Clean the oven interior after each use. Fat accumulation or other food remains may result in a fire. www.zanussi.com... - Page 18 5. Use a screwdriver to remove 2 screws from and wet sponge. bottom edge of door. Cleaning the oven door The oven door has two panels of glass installed one behind the other. To make the cleaning easier remove the oven door. www.zanussi.com...
-
Page 19: Troubleshooting
If the fuse is blown again and again, contact a qualified electrician. There is no spark when you try to Burner cap and crown are placed Place the burner cap and crown activate the spark generator. incorrectly. correctly. www.zanussi.com... - Page 20 Do not remove yourself, contact your dealer or an Authorised the rating plate from the appliance cavity. Service Centre. We recommend that you write the data here: Model (MOD.) ......... Product number (PNC) ......... Serial number (S.N.) ......... www.zanussi.com...
-
Page 21: Installation
Dimension Height 850 - 870 Width Depth Other technical data Appliance category: II2H3B/P LPG: G30 (3B/P) 28-30 mbar Natural Gas: G20 (2H) 20 mbar Bypass diameters BURNER Ø BYPASS 1/100 mm Auxiliary 29 / 30 Semi-rapid Rapid Oven Grill www.zanussi.com... - Page 22 Flexible nonmetal pipes connection If you have an easy access to the connection, you can use a flexible pipe. The flexible pipe must be tightly attached by clamps. www.zanussi.com...
- Page 23 If the supply gas pressure is not constant or it is with the correct injectors. different from the necessary pressure, install an The gas rate is adjusted to suit. applicable pressure adjuster on the gas supply pipe. www.zanussi.com...
- Page 24 7. Screw on slowly the bypass screw till the burner. flame becomes minimum and stable. 8. Put the knob for the hob back on. Oven injector replacement 1. Remove the bottom plate of the oven cavity to get access to the oven burner . www.zanussi.com...
- Page 25 Gas grill injector replacement 2. Remove the knob for the oven functions. If there is no access to the bypass screw 1. Release the screws which keep the grill dismount the control panel before burner in position A. adjustment start. www.zanussi.com...
- Page 26 2. Disassemble the pan supports and all the burner assemblies. To install all the accessories, do the first step in an opposite sequence. Electrical installation WARNING! The manufacturer is not responsible if you do not follow the safety precautions from Safety chapters. www.zanussi.com...
- Page 27 Return the product to your local packaging in relevant containers to recycle it. recycling facility or contact your municipal Help protect the environment and human health office. by recycling waste of electrical and electronic appliances. Do not dispose of appliances www.zanussi.com...
- Page 28 www.zanussi.com/shop...