SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
Page 3
Do not install the appliance behind a decorative door in order to • avoid overheating. Do not install the appliance on a platform. • Do not operate the appliance by means of an external timer or • separate remote-control system. WARNING: Unattended cooking on a hob with fat or oil can be •...
guards incorporated in the appliance. The use of inappropriate guards can cause accidents. SAFETY INSTRUCTIONS • The shock protection of live and insulated parts This appliance is suitable for the following markets: must be fastened in such a way that it cannot be removed without tools.
• Do not let the appliance stay unattended during • Cookware made of cast iron, aluminium or with operation. a damaged bottom can cause scratches. • Deactivate the appliance after each use. Always lift these objects up when you have to •...
• Glass lid can shatter, when heated (if • Do not leave the appliance unattended during applicable). grilling. Accessible parts become hot. • Keep children away when the grill is in use. • Do not put the oven shelf with food on the highest shelf level.
COOKING SURFACE LAYOUT Auxiliary burner Steam outlet - number and position depend on the model Semi-rapid burner Semi-rapid burner Triple Crown burner ACCESSORIES WARNING! The storage compartment can become hot • Wire shelf when the appliance operates. For cookware, cake tins, roasts. •...
HOB - DAILY USE WARNING! Refer to Safety chapters. If the burner accidentally goes out, turn the knob to the off position and try to light the burner again after minimum 1 minute. IGNITION OF THE HOB BURNER BURNER OVERVIEW Always light the burner before you put on the cookware.
HOB - HINTS AND TIPS DIAMETERS OF COOKWARE WARNING! Refer to Safety chapters. WARNING! Use cookware with diameters applicable to the size of burners. COOKWARE WARNING! Do not put the same pan Diameter of cookware on two burners. Burner (mm) WARNING! Do not put unstable or damaged pots on the burner to Triple Crown...
PERIODIC MAINTENANCE Speak to your local Authorised Service Centre periodically to check the conditions of the gas supply pipe and the pressure adjuster, if fitted. OVEN - DAILY USE WARNING! Refer to Safety chapters. OVEN FUNCTIONS Oven function Application Off position The oven is off.
In case of absence of the electricity you can ignite Do not put the meat directly on the the oven burner without an electrical device. tray or pan. 1. Open the oven door. 2. Hold the flame near the hole in the bottom of CAUTION! Do not put the meat on the oven cavity.
OVEN - CLOCK FUNCTIONS MINUTE MINDER Turn the knob for the timer as far as it goes, then turn it to necessary time period. This function has no effect on the After the time period is completed, an acoustic operation of the appliance. signal sounds.
5. Install the first fork on the spit, then put the 7. Put the tip of the spit into the turnspit hole. meat on the turnspit and install the second fork. Refer to "Product description" chapter. Make sure that the meat is in the middle of the 8.
etc.) for your cookware, recipes and quantities when you use this appliance. COOKING TABLES Casseroles Food Quantity (kg) Temperature (°C) Time (min) Shelf position 1.5 - 2.5 45 - 50 Lasagna Cannelloni 1.5 - 2.5 45 - 50 Potato gratin 1.5 - 2.5 33 - 40 Macaroni oven...
Page 15
Pizza Food Quantity (kg) Temperature (°C) Time (min) Shelf position Thin 1.0 - 1.2 20 - 30 Thick 1.4 - 1.5 25 - 30 Calzone 1.4 - 1.5 30 - 35 1) Preheat the oven for 10 minutes. Cakes Food Quantity (kg) Temperature (°C) Time (min)
Food Quantity (kg) Grill position Time (min) Shelf position Toast Hawai 0.5 - 1.0 max. 15 - 20 1) Preheat the oven for 5 minutes. Revolving frying Food Quantity (kg) Grill position Time (min) Shelf position Sheep on 1.5 - 2.0 max.
Page 17
4. Put the door on a soft cloth on a stable surface. Avoid placing the levers in the vertical 5. Use a screwdriver to remove the 2 screws from position and make sure both of them the bottom edge of the door. are pulled maximally towards you.
When the cleaning is completed, install the glass Make sure the levers are in their panels and the oven door. To install the oven door, original position before closing the do the above steps in the opposite sequence. door. Make sure the slot in the hinge A rests on the edge of the hinge support B REPLACING THE LAMP before releasing the oven door.
WHAT TO DO IF... Problem Possible cause Remedy There is no spark when you try The hob is not connected to an Check if the hob is correctly to activate the spark generator. electrical supply or it is con- connected to the electrical nected incorrectly.
We recommend that you write the data here: Model (MOD.) ......... Product number (PNC) ......... Serial number (S.N.) ......... INSTALLATION WARNING! Refer to Safety chapters. Dimension LOCATION OF THE APPLIANCE You can install your freestanding appliance with cabinets on one or two sides and in the corner. Keep a distance of about 1 cm between the appliance and the back TECHNICAL DATA...
Page 21
BYPASS DIAMETERS BURNER Ø BYPASS 1/100 mm Auxiliary 29 / 30 Semi-rapid Triple Crown Oven Grill GAS BURNERS FOR NATURAL GAS G20 20 mbar INJECTOR MARK BURNER NORMAL POWER kW REDUCED POWER kW 1/100 mm Triple Crown 1.80 Semi-rapid 0.45 Auxiliary 0.35 Oven...
Page 22
The appliance is set for liquid gas. You can change it to natural gas, with the correct injectors. The gas rate is adjusted to suit. WARNING! Before you replace the injectors, make sure that the gas knobs are in the Off position. Disconnect the appliance from the electrical supply.
Page 23
WARNING! Put the mains plug into the mains socket only if all parts are back into their initial position. There is a risk of injury. 4. Light the burner. Refer to "Hob - Daily use" chapter. 5. Turn the knob for the hob to the minimum position.
Page 24
4. Release the burner injector with a 7 mm socket spanner and replace it with a right one. Changing from natural gas to liquid gas 1. Fully tighten the bypass screw. 2. Put the knob back. 3. Connect the appliance to the electricity. Changing from liquid gas to natural gas 1.
Page 25
2. Release the burner injector with a 7 mm socket spanner and replace it with a right one. 3. Put the appliance on the sidewall on a clean and smooth surface. Place each foot into a separate hole, in the plinth, and rotate it clockwise.
This appliance is supplied with a main plug and a main cable. WARNING! The power cable must not touch the part of the appliance shaded in the illustration. To install all the accessories, do the first step in an opposite sequence. ELECTRICAL INSTALLATION WARNING! The manufacturer is not responsible if you do not follow the...