Table of Contents
Advertisement
Available languages
Available languages
• you cover a sensor field with an object (a pan, a cloth, etc.) for longer than 10 seconds.
The sound operates until you remove the object.
• the hob gets too hot (e.g. when a saucepan boils dry). Before you use the hob again, the
cooking zone must be cool.
• you use incorrect cookware.
automatically.
• you do not stop a cooking zone or change the heat setting. After some time
on and the hob stops. See the table.
Automatic Switch Off times
Heat setting
Stops after
The heat setting
Touch the control bar at the heat setting. Change
to the left or the right, if it is necessary. Do not
release before you have a correct heat setting. The
display shows the heat setting.
Automatic Heat Up
You can get a necessary heat setting in a shorter time if you activate the Automatic Heat
Up function. This function sets the highest heat setting for some time (see the graphic), and
then decreases to the necessary heat setting.
To start the Automatic Heat Up function for a cooking zone:
1. Touch
2. Immediately touche the necessary heat setting. After 3 seconds
play.
To stop the function change the heat setting.
-
6 hours
12
11
10
9
8
7
6
5
4
3
2
1
0
1
2 3 4 5 6 7 8 9 10 11 12 13 14
(
comes on in the display).
comes on and after 2 minutes the cooking zone stops
-
5 hours
Operating instructions
-
4 hours
1.5 hours
comes on in the dis-
21
comes
-
P
Advertisement
Chapters
Table of Contents
