Cisco Catalyst 9400 System Management Configuration Manual page 292
Cisco ios xe bengaluru 17.4.x
Hide thumbs
Also See for Catalyst 9400:
- Hardware installation manual (192 pages) ,
- Installation note (32 pages) ,
- Troubleshooting manual (14 pages)
Table of Contents
Advertisement
Generic Online Diagnostics (GOLD) Tests
Attribute
Hardware support
TestPoe
This test checks the PoE controller functionality.
Attribute
Disruptive or Nondisruptive
Recommendation
Default
Intitial release
Corrective action
Hardware support
TestUnusedPortLoopback
This test verifies the PHY-level loopback functionality for admin-down ports. In this test, a packet is sent
which loops back at PHY level and is matched against the stored packet.
Attribute
Disruptive or Nondisruptive
Recommendation
Default
Intitial release
Corrective action
Hardware support
TestPortTxMonitoring
This test monitors the transmit counters of a connected interface. It verifies if the connected port is able to
send the packets or not. This test runs every 150 seconds.
Attribute
Disruptive or Nondisruptive
Recommendation
Default
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
274
Configuring Online Diagnostics
Description
Supervisors and linecards.
Description
Nondisruptive.
Run this as a PoE health-monitoring test.
Off.
Cisco IOS XE Everest 16.6.1.
–
Linecards.
Description
Nondisruptive.
This can be run as a health-monitoring test and also
as an on-demand test.
Off.
Cisco IOS XE Fuji 16.9.1.
Displays a syslog message if the test fails for any port.
Supervisors and linecards.
Description
Nondisruptive.
Do not disable. This can be run as a health-monitoring
test and also as an on-demand test.
On.
Advertisement
Table of Contents
Troubleshooting
