Table of Contents
Advertisement
6.3. Switching between offline and online modes
The Configurator interface may not be in the needed mode when you log
in. To switch between Offline and Online modes, do the steps that follow:
1.
Log in to the Configurator interface as shown in
the Cisco FM1000 Gateway for device configuration" (page
• The Configurator landing page will be shown
(page
Figure 22. Fluidmesh Configurator (landing page)
2.
The lower section of the RACER™ Configuration Mode box has
two radio buttons that show whether the unit is in Online (Cloud-
Managed) mode, or Offline mode.
3.
If the unit is not in the correct mode, click the Online (Cloud-
Managed) or Offline radio button as needed.
• A confirmation dialog will be shown, asking if you want to
switch the unit to the chosen mode.
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
48)).
"Accessing
38).
(Figure 22
Page 48 of 138
Advertisement
Table of Contents
