hit counter script
Cisco Aironet Wave 2 Cli Command Reference Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Wireless Access Point
  5. Aironet Wave 2
  6. Cli command reference manual

Cisco Aironet Wave 2 Cli Command Reference Manual

Dual-band wave 2 access point
Hide thumbs
Table of Contents

Advertisement

Quick Links

Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
First Published: 2018-04-10
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883

Advertisement

Table of Contents
loading

Related Manuals for Cisco Aironet Wave 2

Summary of Contents for Cisco Aironet Wave 2

  • Page 1 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7 First Published: 2018-04-10 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883...
  • Page 2 Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.

  • Page 3: Table Of Contents

    C H A P T E R 2 capwap Commands capwap ap capwap ap auth-token capwap ap erase capwap ap ethernet capwap ap hostname capwap ap ip capwap ap lag capwap ap mode capwap ap restart Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...
  • Page 4 C H A P T E R 5 debug Commands debug arp debug ble debug capwap client debug capwap client avc debug cdp debug cleanair debug dhcp debug dot11 debug dot11 client datapath Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...
  • Page 5 C H A P T E R 6 show Commands show ap client-trace status show arp show avc cft show avc nbar show avc netflow flows show avc status Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...
  • Page 6 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...
  • Page 7 C H A P T E R 7 System Management Commands ap-type archive copy delete disable enable exec-timeout logging more reload terminal Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...
  • Page 8 Contents Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7 viii...

  • Page 9: Preface

    Usage of test commands may cause system disruption such as unexpected reboot of the Cisco AP. Therefore, we recommend that you use the test commands on Cisco APs for debugging purposes with the help of Cisco Technical Assistance Center (TAC) personnel.
  • Page 10 Ennen kuin työskentelet minkään laitteiston parissa, ota selvää sähkökytkentöihin liittyvistä vaaroista ja tavanomaisista onnettomuuksien ehkäisykeinoista. (Tässä julkaisussa esiintyvien varoitusten käännökset löydät liitteestä "Translated Safety Warnings" (käännetyt turvallisuutta koskevat varoitukset).) Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...
  • Page 11 (Se förklaringar av de varningar som förekommer i denna publikation i appendix "Translated Safety Warnings" [Översatta säkerhetsvarningar].) Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 12: Related Documentation

    Cisco technical documentation, at: http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html Subscribe to the What's New in Cisco Product Documentation as an RSS feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service. Cisco currently supports RSS Version 2.0.

  • Page 13: Using The Command Line Interface

    Using the Command Line Interface This chapter describes the Cisco Aironet Wave 2 AP command-line interface (CLI) and how to use it to configure your AP. • Understanding Command Modes, on page 2 • Understanding Abbreviated Commands, on page 3 •...

  • Page 14: Understanding Command Modes

    Understanding Command Modes The Cisco Aironet Wave 2 AP command line interface is divided into the following two different modes: • User EXEC mode—When you start a session on the AP, you begin in the User EXEC mode. Only a limited subset of the commands are available in this mode.

  • Page 15: Understanding Abbreviated Commands

    You need to enter only enough characters for the AP to recognize the command as unique. This example shows how to enter the show configuration privileged EXEC command in an abbreviated form: cisco-wave2-ap# show conf Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 16: Understanding No Forms Of Commands

    While you need to use the debug command to enable debugs on many features, the prefix no disables debugs on those respective features. For example: Command to enable debug: cisco-wave2-ap# debug client ... Command to disable debug: cisco-wave2-ap# no debug client ... Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 17: Understanding Cli Error Messages

    The caret (^) marks commands that are available in this command mode. marker. the point of the error. The possible keywords that you can enter with the command appear. Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 18: Configuring The Terminal

    • Configure the number of characters that should be displayed on a screen line by entering this command: terminal width number-of-characters Valid range is 0 to 132. Example: cisco-wave2-ap# terminal width 30 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 19: Recalling Commands

    Press the down arrow Returns to more recent commands in the history buffer after recalling commands with the up arrow key. Repeat the key sequence to recall successively more recent commands. Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 20: Accessing The Cli

    You can access the CLI through a console connection, through Telnet, or by using the browser. Commands you enter in one session are not displayed in the other sessions. Therefore, it is possible to lose track of the session from which you entered commands. Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 21: Capwap Commands

    14 • capwap ap ip, on page 15 • capwap ap lag, on page 16 • capwap ap mode, on page 17 • capwap ap restart, on page 18 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 22: Capwap Ap

    Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to configure the primary controller for the AP: cisco-wave2-ap# capwap ap primary-base wlc-5520 209.165.200.224 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 23: Capwap Ap Auth-Token

    SSC token; valid range is 8 to 32 characters Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to configure authentication token,: cisco-wave2-ap# capwap ap auth-token myauthtoken Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 24: Capwap Ap Erase

    Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to erase all the CAPWAP configuration on the AP: cisco-wave2-ap# capwap ap erase all Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 25: Capwap Ap Ethernet

    Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to configure Ethernet VLAN tagging on the AP: cisco-wave2-ap# capwap ap ethernet tag 2 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 26: Capwap Ap Hostname

    Privileged EXEC (#) Command Modes If the AP is already associated with a Cisco WLC, the new hostname is reflected on the Cisco WLC only after Usage Guidelines the AP dissociates and reassociates with the Cisco WLC. Command History...

  • Page 27: Capwap Ap Ip

    This command was introduced. Examples The following example shows how to configure static IP address and DNS for the CAPWAP AP: cisco-wave2-ap# capwap ap ip 209.165.200.225 255.255.255.224 209.165.200.227 209.165.200.226 example.org Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 28: Capwap Ap Lag

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable LAG on the AP: cisco-wave2-ap# capwap ap lag enable Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 29: Capwap Ap Mode

    Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to configure the AP to operate in local mode: cisco-wave2-ap# capwap ap mode local Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 30: Capwap Ap Restart

    Restart the CAPWAP protocol Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to restart CAPWAP protocol: cisco-wave2-ap# capwap ap restart Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 31: Clear Commands

    21 • clear cts, on page 22 • clear datapath, on page 23 • clear dot11 , on page 24 • clear logging, on page 25 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 32: Clear Avc Nbar

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to clear AVC NBAR statistics: cisco-wave2-ap# clear avc nbar statistics Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 33: Clear Counters

    Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to clear 802.11 interface statistics for the interface number specified: cisco-wave2-ap# clear counters Dot11Radio 1 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 34: Clear Cts

    Command History Release Modification 8.1.111.0 This command was introduced. This example shows you how to clear all the statistics of Cisco TrustSec Security counters: cisco-wave2-ap# clear cts role-based counters all Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 35: Clear Datapath

    Clears the datapath counters Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. This example shows you how to clear the datapath drop counters: cisco-wave2-ap# clear datapath drops Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 36: Clear Dot11

    Clears the sensor configuration and reboots Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. This example shows you how to clear the 802.11 configuration: cisco-wave2-ap# clear dot11 sensor Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 37: Clear Logging

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. This example shows you how to clear the CAPWAP logging details: cisco-wave2-ap# clear logging capwap Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...
  • Page 38 Commands clear logging Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 39: Config Commands

    38 • config cts debug enforcement rate, on page 39 • config cts debug enforcement permissions, on page 40 • config cts debug enforcement protocol, on page 41 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 40: Config Ap Client-Trace

    Enables or disables inline monitoring inline-mon output Enables or disables logging to the console or log file console-log Specifies console log keyword start Starts client tracing stop Stops client tracking Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...
  • Page 41 Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to start client tracing on the AP: cisco-wave2-ap# config ap client-trace start Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 42: Config Ap Client-Trace Filter

    Trace probe packets Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. To set filters for client trace, use this command: cisco-wave2-ap# config ap client-trace filter Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 43: Config Ap Client-Trace Output

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. The following example shows you how to configure the trace output: cisco-wave2-ap# config ap client-trace output Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 44: Config Boot Baudrate

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to configure the baud rate to 9600: cisco-wave2-ap# config boot baudrate 9600 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 45: Config Boot Break

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable boot break: cisco-wave2-ap# config boot break enable Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 46: Config Boot Crashkernel

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable kernel crash: cisco-wave2-ap# config boot crashkernel enable Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 47: Config Boot Debug-Memory

    Disables memory debug Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. This example shows you how to enable memory debug: cisco-wave2-ap# config boot debug-memory enable Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 48: Config Boot Manual

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable manual boot: cisco-wave2-ap# config boot manual enable Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 49: Config Boot Path

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to configure the booth path as 1: cisco-wave2-ap# config boot path 1 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 50: Config Cts Debug Enforcement Host_Ip

    This command was introduced. The following example shows you how to filter the IPv4 SGACL enforcement debugs based on the host IP: cisco-wave2-ap# config cts debug enforcement host_ip ipv4 209.165.200.224 209.165.200.227 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 51: Config Cts Debug Enforcement Rate

    The following example shows how to configure the rate of printing of debug logs such that debugs of 100 packets are displayed for every 500 packets processed: cisco-wave2-ap# config cts debug enforcement rate 100 500 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 52: Config Cts Debug Enforcement Permissions

    This command was introduced. The following example shows you how to filter SGACL enforcement debugs for a destination group tag whose ID is 600: cisco-wave2-ap# config cts debug enforcement permissions dgt 600 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 53: Config Cts Debug Enforcement Protocol

    Modification 8.1.111.0 This command was introduced. The following example shows you how to filter SGACL enforcement debugs based on protocol for UDP traffic: cisco-wave2-ap# config cts debug enforcement protocol udp Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...
  • Page 54 Commands config cts debug enforcement protocol Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 55: Debug Commands

    73 • debug traffic, on page 74 • debug tunnel, on page 75 • debug client trace, on page 76 • no, on page 77 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...
  • Page 56 Commands • traceroute, on page 78 • undebug, on page 79 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 57: Debug Arp

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of ARP errors: cisco-wave2-ap# debug arp errors Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 58: Debug Ble

    Privileged EXEC (#) Command Modes Command History Release Modification This command was introduced. Examples The following example shows how to enable debugging of BLE critical events: cisco-wave2-ap# debug ble critical Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 59: Debug Capwap Client

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of CAPWAP client detail: cisco-wave2-ap# debug capwap client detail Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 60: Debug Capwap Client Avc

    Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of all CAPWAP client AVC: cisco-wave2-ap# debug capwap client avc all Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 61: Debug Cdp

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of CDP events: cisco-wave2-ap# debug cdp events Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 62: Debug Cleanair

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of major CleanAir events: cisco-wave2-ap# debug cleanair major Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 63: Debug Dhcp

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of DHCP errors: cisco-wave2-ap# debug dhcp errors Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 64: Debug Dot11

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of 802.11 error level: cisco-wave2-ap# debug dot11 errors Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 65: Debug Dot11 Client Datapath

    Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of client datapath ARP: cisco-wave2-ap# debug dot11 client datapath arp Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 66: Debug Dot11 Client Level

    Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of all clients at the event level: cisco-wave2-ap# debug dot11 client level events all Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 67: Debug Dot11 Driver Slot

    Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of CAC at the information level: cisco-wave2-ap# debug dot11 driver slot cac info Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 68: Debug Dot11 Sensor

    Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of 802.11 sensor file transfer: cisco-wave2-ap# debug dot11 sensor file-transfer Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 69: Debug Dtls Client

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of DTLS client events: cisco-wave2-ap# debug dtls client event Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 70: Debug Ethernet

    Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of transmission for interface 0: cisco-wave2-ap# debug ethernet 0 xmt Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 71: Debug Flexconnect

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of FlexConnect ACL: cisco-wave2-ap# debug flexconnect acl Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 72: Debug Lldp

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of LLDP errors: cisco-wave2-ap# debug lldp errors Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 73: Debug Memory

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to remove memory debug upon boot-up: cisco-wave2-ap# debug memory clear Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 74: Debug Memory Pool

    Modification 8.1.111.0 This command was introduced. Examples The following example shows how to configure realtime interval of 180 seconds for the memory pool: cisco-wave2-ap# debug memory pool realtime interval 180 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 75: Debug Memory Pool Alloc

    This command was introduced. Examples The following example shows how to configure the start of the debug for all memory pool allocation calls: cisco-wave2-ap# debug memory pool alloc all start Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 76: Debug Memory Pool Free

    This command was introduced. Examples The following example shows how to configure the start of the debugging of all memory pool free calls: cisco-wave2-ap# debug memory pool free all start Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 77: Debug Mesh

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of mesh channel: cisco-wave2-ap# debug mesh channel Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 78: Debug Mesh Adjacency

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of mesh adjacency parent: cisco-wave2-ap# debug mesh adjacency parent Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 79: Debug Mesh Path-Control

    Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of mesh path control errors: cisco-wave2-ap# debug mesh path-control error Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 80: Debug Rrm Neighbor

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of RRM neighbor transmissions: cisco-wave2-ap# debug rrm neighbor tx Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 81: Debug Rrm Reports

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of RRM reports: cisco-wave2-ap# debug rrm reports Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 82: Debug Sip

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of SIP transmissions and reception: cisco-wave2-ap# debug sip all Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 83: Debug Wips

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable wIPS error level debugging: cisco-wave2-ap# debug wips errors Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 84: Debug Authentication Interface

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of WPA module: cisco-wave2-ap# debug authentication interface management wpa Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 85: Debug Process Memory

    Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable the start of debugging of process memory: cisco-wave2-ap# debug process memory start Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 86: Debug Traffic

    Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of host IP traffic dump: cisco-wave2-ap# debug traffic host ip Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 87: Debug Tunnel

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable debugging of EoGRE tunnel: cisco-wave2-ap# debug tunnel eogre Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 88: Debug Client Trace

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable tracing of all clients: cisco-wave2-ap# debug client trace all Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...
  • Page 89 To negate a command or set to its defaults, use the no command. Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. To negate a command or set to its defaults, use this command: cisco-wave2-ap# no debug Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 90: Traceroute

    This command was introduced. Examples The following example shows how to view the routes followed by packets traveling in the network, with a destination IP address specified: cisco-wave2-ap# traceroute 209.165.200.224 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 91: Undebug

    Disables all debugging messages. Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to disable all debugging messages: cisco-wave2-ap# undebug all Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...
  • Page 92 Commands undebug Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 93: Show Commands

    111 • show flexconnect wlan, on page 112 • show interfaces dot11Radio, on page 113 • show interfaces network, on page 114 • show interfaces wired, on page 115 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...
  • Page 94 135 • show version, on page 136 • show trace dot11_chn, on page 137 • show trace, on page 138 • show wips, on page 139 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 95: Show Ap Client-Trace Status

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the AP client trace status: cisco-wave2-ap# show ap client-trace status Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 96: Show Arp

    Modification 8.1.111.0 This command was introduced. The following example shows a sample output of the command: cisco-wave2-ap# show arp Address Age (min) Hardware Addr 9.11.8.1 0 84:80:2D:A0:D2:E6 9.11.32.111 0 3C:77:E6:02:33:3F Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 97: Show Avc Cft

    Command Modes Privileged EXEC (#) Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the AVC client flow table: cisco-wave2-ap# show avc cft 02:35:2E:03:E0:F2 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 98: Show Avc Nbar

    Command Modes Privileged EXEC (#) Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the AVC NBAR build information: cisco-wave2-ap# show avc nbar build Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 99: Show Avc Netflow Flows

    Commands show avc netflow flows show avc netflow flows To list all the flows currently cached and to be sent to the Cisco WLC, use the show avc netflow flows command. show avc netflow flows {download |upload} Syntax Description...

  • Page 100: Show Avc Status

    Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 101: Show Boot

    8.1.111.0 This command was introduced. The following example shows how to view boot attributes: cisco-wave2-ap# show boot BOOT path-list: part2 Console Baudrate: 9600 Enable Break: Manual Boot: Memory Debug: Crashkernel: Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 102: Show Capwap

    User EXEC (>) Command Modes Privileged EXEC (#) Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the CAPWAP multicast information: cisco-wave2-ap# show capwap mcast Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 103: Show Capwap Client

    Command Modes Privileged EXEC (#) Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view CAPWAP client traffic information: cisco-wave2-ap# show capwap client traffic Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 104: Show Capwap Client Trace

    User EXEC (>) Command Modes Privileged EXEC (#) Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view CAPWAP client trace: cisco-wave2-ap# show capwap client trace Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 105: Show Capwap Ids Sig

    Command Modes Privileged EXEC (#) Command History Release Modification 8.1.111.0 This command was introduced. The following example show how to view CAPWAP ID signature statistics: cisco-wave2-ap# show capwap ids sig stats Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 106: Show Cdp

    Command Modes Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view information for a specific neighbor entry: cisco-wave2-ap# show cdp entry device mydevice Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 107: Show Class-Map

    User EXEC (>) Command Modes Privileged EXEC (#) Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view CPL class map: cisco-wave2-ap# show class-map Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 108: Show Cleanair Debug

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view CleanAir debug settings: cisco-wave2-ap# show cleanair debug Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 109: Show Client Statistics

    MAC address of the client Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view client statistics: cisco-wave2-ap# show client statistics 70:DB:98:66:34:FA Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 110: Show Clock

    User EXEC (>) Command Modes Privileged EXEC (#) Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the system clock: cisco-wave2-ap# show clock Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 111: Show Configuration

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view contents of non-volatile memory: cisco-wave2-ap# show configuration Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 112: Show Controller Ble

    Last scan done at : 0D:00H:00M:06S ago If scanning is working as expected, the 'Last scan done at' time should always be less than or equal to the scan interval set. Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 113: Show Controllers Dot11Radio

    Privileged EXEC (#) Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view 802.11 interface information for interface number 1: cisco-wave2-ap# show controllers dot11Radio 1 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 114: Show Controllers Nss Status

    User EXEC (>) Command Modes Privileged EXEC (#) Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view NSS information: cisco-wave2-ap# show controllers nss status Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 115: Show Controllers Wired

    0 Crc errors sent, 0 Flow control rx, 0 Flow control tx, 0 Rx fifo overrun, 0 Undersized rx, 0 Fragments rx, 0 Oversize rx, 0 Jabber rx, 0 Mac rx error, 0 Bad crc event, 0 Collision, 0 Late collision, Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 116: Show Crypto

    User EXEC (>) Command Modes Privileged EXEC (#) Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the crypto attributes: cisco-wave2-ap# show crypto Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 117: Show Debug

    Command Modes Privileged EXEC (#) Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the debugs that are in enabled state: cisco-wave2-ap# show debug Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 118: Show Dhcp

    Privileged EXEC (#) Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the status of DHCP addresses leased from a server: cisco-wave2-ap# show dhcp lease Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 119: Show Dot11 Qos

    Command Modes Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the Quality of Service (QoS) parameters for 802.11 network: cisco-wave2-ap# show dot11 qos Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 120: Show Filesystems

    This command was introduced. The following example shows how to view the filesystem information: cisco-wave2-ap# show filesystems Filesystem Size Used Available Use% Mounted on /dev/ubivol/storage 57.5M 1.9M 52.6M 4% /storage Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 121: Show Flash

    Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the details of a core file in flash: cisco-wave2-ap# show flash cores detail filename1 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 122: Show Flexconnect

    Privileged EXEC (#) Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the information about a client of a FlexConnect AP: cisco-wave2-ap# show flexconnect client Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 123: Show Flexconnect Oeap Firewall

    Privileged EXEC (#) Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the OEAP firewall DMZ information: cisco-wave2-ap# show flexconnect oeap firewall dmz Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 124: Show Flexconnect Wlan

    Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the WLAN Layer 2 ACL mapping for the Flexconnect cisco-wave2-ap# show flexconnect wlan l2acl Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 125: Show Interfaces Dot11Radio

    The following example shows how to view the DFS statistics for a 802.11 interface whose number is 1: cisco-wave2-ap# show interfaces dot11Radio 1 dfs DFS Data: Radar Detected: Inactive Radar Detected: 0 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 126: Show Interfaces Network

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the Linux network interfaces: cisco-wave2-ap# show interfaces network Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 127: Show Interfaces Wired

    Command Modes Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the wired interface whose number is 1: cisco-wave2-ap# show interfaces wired 1 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 128: Show Inventory

    The following example shows how to view the physical inventory: cisco-wave2-ap# show inventory NAME: AP2800, DESCR: Cisco Aironet 2800 Series (IEEE 802.11ac) Access Point PID: AIR-AP2802I-D-K9 , VID: V01, SN: XXXXXXXXXXX Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 129: Show Ip

    Privileged EXEC (#) Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view information about the lists the IP access lists: cisco-wave2-ap# show ip access-lists Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 130: Show Lacp

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the LACP traffic information: cisco-wave2-ap# show lacp counters Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 131: Show Logging

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the contents of logging buffers: cisco-wave2-ap# show logging Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 132: Show Memory

    SUnreclaim: 128772 kB KernelStack: 864 kB PageTables: 748 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 515304 kB Committed_AS: 193960 kB VmallocTotal: 1024000 kB VmallocUsed: 69808 kB Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...
  • Page 133 Commands show memory VmallocChunk: 915324 kB System Memory: total used free shared buffers Mem: 1030608 316848 713760 -/+ buffers: 316848 713760 Swap: Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 134: Show Policy-Map

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the policy maps on the access point: cisco-wave2-apshow policy-map Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 135: Show Processes

    The following example shows how to view the process watchdog status: cisco-wave2-ap# show processes status Process Alive Monitored capwapd True True switchdrvr True False wcpd True True kclick True True cleanaird True True mrvlfwd True True Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 136: Show Processes Memory

    132 {show_process_me} /bin/ash /usr/bin/cli_scripts/show_process_memory.sh 0 0 0 0 0 0 0 0 0 0 30911 1592 132 /bin/sh -c /usr/bin/cli_scripts/show_process_memory.sh 0 0 0 0 0 0 0 0 0 0 | more Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...
  • Page 137 132 /usr/sbin/dropbear -E -j -k -d /storage/dropbear/dropbear_dss_host_key -r /storage/dropbear/dropbear_rsa_host_key 6209 1384 132 /usr/sbin/dropbear -E -j -k -d /storage/dropbear/dropbear_dss_host_key -r /storage/dropbear/dropbear_rsa_host_key 8411 1096 132 dnsmasq -C /etc/dnsmasq.host.conf 6115 1096 132 dnsmasq -C /etc/dnsmasq.vaperr.conf Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 138: Show Rrm

    Level-1 List for 2.4GHz Band =================================== Channel Width Serving MAC Max Clients ------- ----- ----------------- ----------- Level-1 List for 5GHz Band =================================== Channel Width Serving MAC Max Clients ------- ----- ----------------- ----------- Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 139: Show Rrm Rogue Containment

    Rogue Containment Info and Stats for slot 1: bssid client-addr contain-type channels Request Status count Submit Success Timeout Error Tuned Flushed Bad Channel Tail Dropped Cancelled NDP DFS Tx Cancelled Tx Failed Created Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 140: Show Rrm Rogue Detection

    Rogue Detection Transient Interval : 0 Rogue Detection Flex Contain : Disabled Rogue Detection Flex Contain Adhoc : Disabled Rogue Detection Flex Contain SSID : Disabled Rogue Containment Autorate : Disabled Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...
  • Page 141 Commands show rrm rogue detection Scan Duration : 180000 Channel Count : 25 Transient Threshold : 0 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 142: Show Running-Config

    Extlog Status Interval Syslog Host : <syslog-host-ip-address> Syslog Facility Syslog Level : errors Core Dump TFTP IP Addr Core Dump File Compression : Disabled Core Dump Filename Client Trace Status : Enabled(All) Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...
  • Page 143 Client Trace All Clients : Enabled Client Trace Filter : 0x0000000E Client Trace Out ConsoleLog: Disabled WLC Link LAG status : Disabled AP Link LAG status : Disabled AP WSA Mode : Disabled Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 144: Show Security Data-Corruption

    Syntax Description Privileged EXEC (#) Command Modes Command History Release Modification This command was introduced. Examples The following example shows how to view data inconsistency errors: cisco-wave2-ap# show security data-corruption Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 145: Show Security System State

    Indicates whether the system prevents the text section from being writable OSC version Indicates the version of the OSC library used by the applications SafeC version Indicates the version of the SafeC library used by the applications Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 146: Show Spectrum

    1.15.4 status: up, crashes 0, resets 0, radio reloads 0 load: 37.25 38.00 38.75 39.00 NSI Key: 26c1bd25893a4b6dd3a00fe71735d067 NSI: not configured reg_wdog: 255 26309 0 dfs_wdog: 0 dfs_freq: 0 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 147: Show Tech-Support

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to automatically run show commands that display system information: cisco-wave2-ap# show tech-support Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 148: Show Version

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the software version information of the AP: cisco-wave2-ap# show version Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 149: Show Trace Dot11_Chn

    The following example shows how to view off-channel event statistics on 802.11 radios: cisco-wave2-ap# show trace dot11_chn statistics Dot11Radio0 Off-Channel Statistics: total_count in_prog_count last-chan last-type last-dur Dot11Radio1 Off-Channel Statistics: total_count in_prog_count last-chan last-type last-dur Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 150: Show Trace

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the trace logs on the AP: cisco-wave2-ap# show trace Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 151: Show Wips

    Displays AP statistics violation Tracks AP violations node mac-address Tracks node-based violations channel channel-number alarm-id Tracks channel-based violations; you must enter channel numbeer and alarm ID Privileged EXEC (#) Command Modes Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...
  • Page 152 Commands show wips Command History Release Modification 8.1.111.0 This command was introduced. The following example shows how to view the wIPS statistics information on the AP: cisco-wave2-ap# show wips stats Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 153: System Management Commands

    147 • exec-timeout , on page 148 • logging, on page 149 • more, on page 150 • reload, on page 151 • terminal, on page 152 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 154: Ap-Type

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to configure the AP type to CAPWAP: cisco-wave2-ap# ap-type capwap Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 155: Archive

    Download the image from the Cisco WLC word Enter the image details in the ap image type ap3g3/ap1g4 format Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 156: Copy

    Copies the support bundle to the server syslogs Applies the action on the syslog file Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 157: Delete

    Filename to delete Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to delete a file: cisco-wave2-ap# delete /rf cores file-name Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 158: Disable

    To turn off privileged commands, use the disable command. disable Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to turn off privileged commands: cisco-wave2-ap# disable Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 159: Enable

    To turn on privileged commands, use the enable command. enable User EXEC (>) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to turn on privileged commands: cisco-wave2-ap> enable Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 160: Exec-Timeout

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to set the exec-timeout to 20 seconds: cisco-wave2-ap# exec-timeout 20 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 161: Logging

    Clear syslog server IP clear Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to enable console logging: cisco-wave2-ap# logging console Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 162: More

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to display a sylog file named test-log: cisco-wave2-ap# more syslog test-log Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 163: Reload

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to reload the AP in 10 minutes: cisco-wave2-ap# reload in 10 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

  • Page 164: Terminal

    Privileged EXEC (#) Command Modes Command History Release Modification 8.1.111.0 This command was introduced. Examples The following example shows how to configure the terminal length to 50 lines: cisco-wave2-ap# terminal length 50 Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7...

Table of Contents

Save PDF