Download Print this page

Removing The Shelf Bracket Kit (Optional; Removing The Shelf Bracket Kit (Optional) - Cisco MDS 9100 Series Hardware Installation Manual

Hide thumbs Also See for MDS 9100 Series:

Table of Contents

Chapter 1

Cabinet and Rack Installation

Removing the Shelf Bracket Kit (Optional)

The shelf bracket kit can be removed after the Cisco MDS 9148S switch has been installed in a four-post

EIA rack, and both front rack-mount brackets and both C brackets are securely attached to the

rack-mounting rails.

To remove the shelf bracket kit, follow these steps:

Step 1

Remove the screws fastening the slider brackets to the rear rack-mounting rails, and then slide the slider

brackets out of the shelf brackets.

Step 2

Remove the screws fastening the crossbar to the shelf brackets, and then remove the crossbar.

Step 3

Remove the screws fastening the shelf brackets to the front rack-mounting rails and remove the shelf

brackets from the rack.

OL-20185-01

Cisco MDS 9000 Family Telco and EIA Shelf Bracket

Cisco MDS 9148S Multilayer Switch Hardware Installation Guide

1-51

Table of Contents

Mds 9148s Ds-c9148s48pk9