hit counter script
Cisco MDS 9100 Series Installation Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Switch
  5. MDS 9100 Series
  6. Installation manual
Cisco MDS 9100 Series Installation Manual

Cisco MDS 9100 Series Installation Manual

Cisco systems switch installation guide
Hide thumbs Also See for MDS 9100 Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Configuration Manual
Enlarged version
Cisco MDS 9100 Series Hardware
Installation Guide
April 2008
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-16187-01

Advertisement

Table of Contents
loading

Related Manuals for Cisco MDS 9100 Series

Summary of Contents for Cisco MDS 9100 Series

  • Page 1 Cisco MDS 9100 Series Hardware Installation Guide April 2008 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-16187-01...
  • Page 2 MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc.

  • Page 3: Table Of Contents

    Installation and Configuration Note Obtaining Documentation, Obtaining Support, and Security Guidelines Product Overview C H A P T E R Cisco MDS 9100 Series Multilayer Fabric Switches Cisco MDS 9134 Switch Cisco MDS 9124 Switch Cisco MDS 9140 Switch Cisco MDS 9120 Switch...
  • Page 4 Removing Power Supplies Installing Power Supplies Removing and Installing Fan Modules Removing a Fan Module on the Cisco MDS 9140 Switch, the Cisco MDS 9120 Switch, and the Cisco MDS 9134 Switch Installing a Fan Module Verifying the Fan Module...
  • Page 5 Cisco CWDM SFP Transceivers General Specifications for Cisco CWDM SFP Transceivers Environmental and Electrical Specifications for Cisco CWDM SFP Transceivers Optical Specifications for Cisco CWDM SFP Transceivers X2 Transceiver Specifications OL-16187-01 B-10 Cisco MDS 9100 Series Hardware Installation Guide Contents...
  • Page 6 Power Cords Jumper Power Cord Site Planning and Maintenance Records A P P E N D I X Site Preparation Checklist Contact and Site Information Chassis and Network Information N D E X Cisco MDS 9100 Series Hardware Installation Guide OL-16187-01...

  • Page 7: New And Changed Information

    S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m New and Changed Information This Cisco MDS 9100 Series Hardware Installation Guide applies to all the Cisco MDS SAN-OS releases.
  • Page 8 Table 1 Documented Features for the Cisco MDS 9100 Series (continued) Feature Cisco MDS 9124 Switch Rear-facing chassis installation Jumper power cord Telco and EIA Shelf Bracket Console port to modem connection Cisco MDS 9100 Series Cisco MDS 9100 Series Hardware Installation Guide...

  • Page 9: Audience

    S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Preface This preface describes the audience, organization, and conventions of the Cisco MDS 9100 Series Hardware Installation Guide. It also provides information on how to obtain related documentation.

  • Page 10: Document Conventions

    Tässä julkaisussa esiintyvien varoitusten käännökset löydät laitteen mukana olevasta Regulatory Compliance and Safety Information -kirjasesta (määräysten noudattaminen ja tietoa turvallisuudesta). Cisco MDS 9100 Series Hardware Installation Guide Title Description Lists cable and port specifications for the Specifications Cisco MDS 9100 Series switch.
  • Page 11 Para ver una traducción de las advertencias que aparecen en esta publicación, consultar el documento titulado Regulatory Compliance and Safety Information (Información sobre seguridad y conformidad con las disposiciones reglamentarias) que se acompaña con este dispositivo. Cisco MDS 9100 Series Hardware Installation Guide OL-16187-01...

  • Page 12: Related Documentation

    Cisco MDS 9124 Multilayer Fabric Switch Quick Start Guide • Cisco MDS 9500 Series Hardware Installation Guide • Cisco MDS 9200 Series Hardware Installation Guide • Cisco MDS 9100 Series Hardware Installation Guide • Cisco MDS 9100 Series Hardware Installation Guide Preface OL-16187-01...

  • Page 13: Cisco Fabric Manager

    Cisco MDS 9000 Family Port Analyzer Adapter Installation and Configuration Note • Cisco 10-Gigabit X2 Transceiver Module Installation Note • Cisco MDS 9000 Family CWDM SFP Installation Note • Cisco MDS 9000 Family CWDM Passive Optical System Installation Note • • OL-16187-01 Cisco MDS 9100 Series Hardware Installation Guide xiii...

  • Page 14: Obtaining Documentation, Obtaining Support, And Security Guidelines

    Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0. Cisco MDS 9100 Series Hardware Installation Guide Preface OL-16187-01...

  • Page 15: Chapter 1 Product Overview

    The Cisco MDS 9100 Series Multilayer Fabric Switches provide an intelligent, cost-effective, and small-profile switching platform for small- and medium-sized storage environments. The Cisco MDS 9100 Series also provides full-feature capability with the Cisco MDS 9500 Series multilayer directors for a transparent, end-to-end service delivery in large data-center core-edge deployments.
  • Page 16 For a list of features supported on the Cisco MDS 9134 Switch and the Cisco MDS 9124 Switch and for information on how to configure the Cisco MDS 9100 Series, see the Cisco MDS 9000 Family Fabric Manager Configuration Guide and the Cisco MDS 9000 Family CLI Configuration Guide.

  • Page 17: Cisco Mds 9100 Series Multilayer Fabric Switches

    Cisco MDS 9100 Series Multilayer Fabric Switches Cisco MDS 9134 Switch The Cisco MDS 9134 Multilayer Fabric Switch has a total of 32 1-, 2-, and 4-Gbps autosensing Fibre Channel ports, and 2 10-Gbps ports. The Cisco MDS 9134 Switch (see...

  • Page 18: Cisco Mds 9124 Switch

    For a list of features supported on the Cisco MDS 9124 Switch, see the Cisco MDS 9000 Family Fabric Manager Configuration Guide and the Cisco MDS 9000 Family CLI Configuration Guide.

  • Page 19: Cisco Mds 9120 Switch

    Product Overview Cisco MDS 9120 Switch The Cisco MDS 9120 Switch has a total of 20 1/2-Gbps autosensing, optionally configurable ports. The first group of four ports on the left-hand side are the bandwidth-optimized ports. They are delineated by a white border. The remaining four groups of four ports each are the host optimized port groups. See Figure 1-4.

  • Page 20: Power Supplies

    Power Supplies Power Supplies The Cisco MDS 9100 Series supports dual AC power supplies. Each power supply provides sufficient power to maintain switch operation in the event of a single power supply failure. Power supplies are hot swappable and can be individually replaced without disruption to the system. (See the Specifications”...

  • Page 21: Cisco Mds 9100 Series Ports

    Except for the Cisco MDS 9134 Switch, the fan modules each have one Status LED. The Cisco MDS 9134 Switch fan modules do not have a Status LED. Fan module status is also indicated on a front panel LED.
  • Page 22 All 32 4-Gbps ports and 2 10-Gbps ports can operate at line rate concurrently. In addition, the 10-Gbps ports can be activated independently at 24- or 32-port configurations. A 64-port switch can be formed by stacking two Cisco MDS 9134 Switches together using a copper CX4 X2 transceiver.

  • Page 23: Ports On The Cisco Mds 9124 Switch

    The on-demand ports are licensed in groups of eight. By default, an on-demand license for the first eight ports (ports 1 through 8) is included with the switch. You can transfer that license to other ports on the switch or obtain extra licenses to make more ports on the switch available. You can activate additional ports in 8-port increments with each on-demand port license.

  • Page 24: Switch Leds

    Switch LEDs Only the first port in each four-port group can be an Inter-Switch Link (ISL). If the first port is an ISL, the other three ports in the group are disabled. See Figure 1-8 Console port 10/100 Ethernet management port 4...
  • Page 25 Fan module status LED Reset button Cisco MDS 9140 Switch and Cisco MDS 9120 Switch LEDs 10/100 Ethernet management port activity LED Top port link LED Bottom port link LED Cisco MDS 9100 Series Hardware Installation Guide Switch LEDs 1-11...
  • Page 26 Switch LEDs Table 1-2 describes the front panel LEDs for the Cisco MDS 9100 Series. Table 1-2 Switching Module LEDs Status Switch status Green Orange Power supply Green status Orange Red or all LEDs off Both power supplies have failed.

  • Page 27: Supported Sfp Transceivers

    B-4. SFP transceivers can be ordered separately or with the Cisco MDS 9100 Series. Use only Cisco SFP transceivers on the Cisco MDS 9100 Series. Each Cisco SFP transceiver is encoded Note with model information that enables the switch to verify that the SFP transceiver meets the requirements for the switch.

  • Page 28: Combination Fibre Channel/Gigabit Ethernet Sfp Transceivers

    For transceiver specifications, see CWDM Combination Fibre Channel/Gigabit Ethernet SFP Transceivers All Fibre Channel and Gigabit Ethernet ports in the Cisco MDS 9100 Series support CWDM SFP transceivers. The Cisco CWDM SFP transceivers have LC connectors and support both Gigabit Ethernet and Fibre Channel (1-Gbps / 2-Gbps).

  • Page 29: Installing The Cisco Mds 9100 Series

    S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Installing the Cisco MDS 9100 Series This chapter describes how to install the Cisco MDS 9100 Series and its components, and it includes the following information: Preinstallation, page 2-2 •...

  • Page 30: Preinstallation

    Required Equipment, page 2-4 • Unpacking and Inspecting the Switch, page 2-4 • Installation Options The Cisco MDS 9100 Series can be installed using the following methods: In an open EIA rack, using: • – The rack-mount kit shipped with the switch –...

  • Page 31: Installation Guidelines

    For instructions on installing the switch using the optional, separately purchased telco and EIA Shelf Bracket Kit, see the Note The telco and EIA Shelf Bracket Kit is optional and is not provided with the switch. To order the kit, contact your switch provider. Installation Guidelines Follow these guidelines when installing the Cisco MDS 9100 Series: Plan your site configuration and prepare the site before installing the switch.

  • Page 32: Required Equipment

    • Unpacking and Inspecting the Switch When handling switch components, wear an ESD strap and handle modules by the carrier edges only. Caution An ESD socket is provided on the chassis. For the ESD socket to be effective, the chassis must be grounded through the power cable, the chassis ground, or the metal-to-metal contact with a grounded rack.

  • Page 33: Installing The Switch In A Cabinet Or Rack

    • Installing the Switch in a Cabinet or Rack This section describes how to use the rack-mount kit provided with the switch to install the Cisco MDS 9100 Series into a cabinet or rack that meets the requirements described in Rack Installation.”...

  • Page 34: Front-Facing Installation

    Two C brackets are shipped preinstalled on the switch, using three M3 screws per bracket. This installation step is only necessary if the C brackets were removed. Position one of the C brackets against the side of the switch and align the screw holes as shown in Figure 2-1.
  • Page 35 Repeat with the other slider rail on the other side of the rack. OL-16187-01 Front Rack-Mount Brackets and C Brackets Installed on the Cisco MDS 9100 Series C bracket Figure 2-2. If you are using the notched slider rails for the Cisco MDS 9134 Figure 2-3.
  • Page 36 Use the tape measure and level to verify that the rails are horizontal and at the same height. Figure 2-2 Figure 2-3 Cisco MDS 9100 Series Hardware Installation Guide Installing the Slider Rails Installing the Notched Slider Rails Chapter 2...
  • Page 37 Align the two C brackets on either side of the switch with the slider rails installed in the rack. Slide the C brackets onto the slider rails, and then gently slide the switch all the way into the rack. If the switch does not slide easily, try realigning the C brackets on the slider rails.
  • Page 38 Installing the Switch in a Cabinet or Rack Figure 2-5 Stabilize the switch in the rack by attaching the front rack-mount brackets to the front rack-mounting Step 6 rails: Insert two screws (12-24 or 10-32, depending on rack type) and through the cage nuts and the holes...

  • Page 39: Installing The Switch In A Cabinet With Insufficient Front Clearance

    This section describes how to use the rack-mount kit provided with the switch to install the Cisco MDS 9100 Series switch into a cabinet with insufficient front-facing clearance. The Cisco MDS 9100 Series switch is installed rear-facing to provide adequate clearance for the fibre-optic cables. This cabinet meets...
  • Page 40 This rear-facing installation is necessary to ensure that the minimum bend radius for the fiber-optic cables is maintained. In these cabinets, the Cisco MDS 9100 Series switch is mounted backwards, with the fiber optic cables facing toward the rear of the cabinet and the power supplies facing the front of the cabinet.

  • Page 41: Installing Front Rack Mount Brackets For Cabinets With 26 Inches Or Greater Of Rail Spacings

    Installing Front Rack-Mount Brackets for Cabinets with 26 Inches or Greater of Rail Spacings The front rack-mount brackets for the Cisco MDS 9100 Series switch must be installed onto the switch prior to installing the switch into the cabinet. Follow these steps for cabinets with front-mounting rail to rear-mounting rail spacings greater or equal to 26 inches.

  • Page 42: Installing Front Rack Mount Brackets For Cabinets With Less Than 26 Inches Of Rail Spacings

    Repeat with the other front rack-mount bracket on the other side of the switch. The front rack-mount bracket does not align with all three holes in the Cisco MDS 9100 Series switch Note in this configuration. The two screws are adequate to hold the weight of the Cisco MDS 9100 Series switch.

  • Page 43: Installing Cisco Mds 9100 Series Switch Rear-Facing Into Cabinet

    Installing Cisco MDS 9100 Series Switch Rear-Facing into Cabinet To install a Cisco MDS 9120 or 9140 Switch rear-facing into a cabinet using the rack-mount kit provided with the switch (for cabinets with insufficient front-facing clearance), follow the steps in this section. If...
  • Page 44 Align the two C brackets on either side of the switch with the slider rails installed in the rack. Slide the C brackets onto the slider rails and then gently slide the switch all the way into the rack. If the switch does not slide easily, try realigning the C brackets on the slider rails.

  • Page 45: Installing A Cisco Mds 9134 Switch Or A Cisco Mds 9124 Switch Rear-Facing Into Cabinet

    Installing a Cisco MDS 9134 Switch or a Cisco MDS 9124 Switch Rear-Facing into Cabinet To install a Cisco MDS 9134 Switch or a Cisco MDS 9124 Switch rear-facing into a cabinet using the rack-mount kit provided with the switch (for cabinets with insufficient front-facing clearance), follow...
  • Page 46 Installing the Switch in a Cabinet with Insufficient Front Clearance When installing the Cisco MDS 9134 Switch or the Cisco MDS 9124 Switch rear-facing into a Note cabinet, do not install it higher than RU-30. Route the power cord through the open cutout at the end of one of the slider rails, and then let the cord dangle while you proceed with the next steps.
  • Page 47 Align the two C brackets on either side of the switch with the slider rails installed in the rack. Slide the C brackets onto the slider rails and then gently slide the switch all the way into the rack. If the switch does not slide easily, try realigning the C brackets on the slider rails.
  • Page 48 Installing the Switch in a Cabinet with Insufficient Front Clearance Figure 2-15 Figure 2-16 Cisco MDS 9100 Series Hardware Installation Guide 2-20 Correct Position of Power Cord Routed Through Notched Slider Rail Incorrect Position of Power Cord Routed Over the Notched Slider Rail...

  • Page 49: Installing Cisco Mds 9134 48-Port And 64-Port Stackable Bundles

    To install two Cisco MDS 9134 Switches to stack and expand up to 48 ports and/or 64 ports, follow these steps: Ensure that two boxes each consisting of a Cisco MDS 9134 Switch with a 10-Gbps transceiver plugged Step 1 in and a copper cable are received.
  • Page 50 Plug in one end of the copper cable to the 10-Gbps transceiver of the MDS 9134 switch that is supplied in the same box and the other end to the 10-Gbps transceiver of the MDS 9134 switch of the second box so as to connect two MDS 9134 switches.

  • Page 51: Grounding The Switch

    Grounding the Switch A grounding pad with two threaded M4 holes is provided on the chassis for attaching a grounding lug. Figure 2-19 shows the system ground location on the Cisco MDS 9100 Series. Figure 2-19 Warning When installing or replacing the unit, the ground connection must always be made first and disconnected last.

  • Page 52: Starting Up The Switch

    Depending on the outlet receptacle on your power distribution unit, you may need the optional Note jumper power cord to connect the Cisco MDS 9100 Series Switch switch to your outlet receptacle. See the Connect the other end of the power cables to an AC power source.
  • Page 53 • Each power supply LED is green. • The Switch status LED is green. If this LED is orange or red, then one or more environmental • monitors is reporting a problem. The Ethernet port Link LEDs should not be on unless the cable is connected.

  • Page 54: Removing And Installing Components

    Statement 1034 During this procedure, wear grounding wrist straps to avoid ESD damage to the switch. Caution The Cisco MDS 9100 Series is only supported for operation with both power supplies and both fan Note modules installed, with all fans working.
  • Page 55 Fixed Optional power module OL-16187-01 Rear View of the Cisco MDS9134 Switch module module Power module Rear View of the Cisco MDS 9124 Switch Power module Fixed fans Cisco MDS 9100 Series Hardware Installation Guide Removing and Installing Components 2-27...
  • Page 56 Removing and Installing Components For the Cisco MDS 9140 Switch and the Cisco MDS 9120 Switch, the fans should not be removed for prolonged periods of time during operation. If one fan module fails, a single healthy fan module can temporarily provide sufficient cooling to maintain switch operation under normal conditions, but the failed fan module should be replaced as soon as possible.

  • Page 57: Removing And Installing Power Supplies

    Step 2 Make sure the power cord is disconnected before installing the power supply. Step 3 Verify that the power switch is in the off (0) position on the power supply you are installing. OL-16187-01 Cisco MDS 9100 Series Power Supply...

  • Page 58: Removing And Installing Fan Modules

    Depending on the outlet receptacle on your power distribution unit, you may need the optional Note jumper power cord to connect the Cisco MDS 9100 Series Switch to your outlet receptacle. See “Jumper Power Cord” section on page Step 8 Turn the power switch to the on (|) position on the power supply.
  • Page 59 Chapter 2 Installing the Cisco MDS 9100 Series Removing and Installing Components Pull the fan module out of the switch and put it in a safe place. Step 4 Cisco MDS 9100 Series Hardware Installation Guide 2-31 OL-16187-01...

  • Page 60: Installing A Fan Module

    To install a new fan module, follow these steps: Step 1 Position the fan module with the LED oriented away from the back of the switch. fan module for the Cisco MDS 9120 Switch and the Cisco MDS 9140 Switch.

  • Page 61: Verifying The Fan Module

    Step 1 Listen for the fans; you should immediately hear them operating. If you do not hear them, ensure that the fan module is inserted completely in the switch and the faceplate is flush with the switch back panel. Step 2 Verify that the Fan module LED is green.
  • Page 62 Chapter 2 Installing the Cisco MDS 9100 Series Removing and Installing Components Cisco MDS 9100 Series Hardware Installation Guide 2-34 OL-16187-01...

  • Page 63: Chapter 3 Connecting The Cisco Mds 9100 Series

    • connect to the SAN, or for in-band management. This chapter describes how to connect the various components of the Cisco MDS 9100 Series Fixed Configuration Fabric Switch, and it includes the following information: Preparing for Network Connections, page 3-1 •...

  • Page 64: Chapter 3 Connecting The Cisco Md 9100 Serie

    The PC must support VT100 terminal emulation. The terminal emulation software—frequently a PC Note application such as HyperTerminal Plus—makes communication between the Cisco MDS 9100 Series switch and your PC possible during setup and configuration. To connect the console port to a PC, follow these steps:...

  • Page 65: Connecting A Modem To A Console Port

    Connecting the Cisco MDS 9100 Series Connecting a Modem to a Console Port Do not connect the console port to a modem while the switch is booting. Connect the console port to a Caution modem either before powering the switch on or after the switch has completed the boot process.

  • Page 66: Connecting To A Fibre Channel Port

    We recommend disconnecting cables before installing or removing SFP transceivers to prevent damage to the cable or transceiver. Use only Cisco SFP transceivers on the Cisco MDS 9100 Series. Each Cisco SFP transceiver is encoded Note with model information that enables the switch to verify that the SFP transceiver meets the requirements for the switch.

  • Page 67: Installing An Sfp Transceiver

    Insert or leave the dust plug in the cable end of the transceiver if a cable is not being installed in the Step 5 transceiver. OL-16187-01 (Figure 3-2) (Figure 3-3) SFP Transceiver with Mylar Tab Latch SFP Transceiver with Bale-Clasp Latch Cisco MDS 9100 Series Hardware Installation Guide Connecting to a Fibre Channel Port...

  • Page 68: Removing An Sfp Transceiver

    SFP inward and upward into the cage (inward and downward on the bottom row of the Cisco MDS 9124 Switch). Next, lower the bale clasp and pull the SFP straight out with a slight upward lifting force (slight downward force on the bottom row of the Cisco MDS 9124 Switch).

  • Page 69: Removing And Installing Cables Into Sfp Transceivers

    Step 4 into place. (See OL-16187-01 Alternate Removal Method for Bale Clasp SFP Transceivers in the Cisco MDS 9140 Switch and the Cisco MDS 9120 Switch Figure 3-6). Cisco MDS 9100 Series Hardware Installation Guide Connecting to a Fibre Channel Port...

  • Page 70: Removing A Cable From An Sfp Transceiver

    Insert a dust plug into the cable end of the transceiver. Step 3 Insert a dust plug onto the end of the cable. Step 4 Cisco MDS 9100 Series Hardware Installation Guide Connecting the LC-Type Cable to a Fibre Channel Port LC plug Chapter 3...

  • Page 71: Maintaining Sfp Transceivers And Fiber-Optic Cables

    • Inspect routinely for dust and damage. If damage is suspected, clean and then inspect fiber ends under a microscope to determine if damage has occurred. OL-16187-01 Connecting to a Fibre Channel Port Cisco MDS 9100 Series Hardware Installation Guide...
  • Page 72 Chapter 3 Connecting the Cisco MDS 9100 Series Connecting to a Fibre Channel Port Cisco MDS 9100 Series Hardware Installation Guide 3-10 OL-16187-01...

  • Page 73: Cabinet And Rack Installation

    OL-16187-01 C H A P T E R “Requirements Specific to Perforated “Requirements Specific to Solid-Walled Cabinets” section on “Requirements Specific to Telco Racks” section on Cisco MDS 9100 Series Hardware Installation Guide...

  • Page 74: Requirements Specific To Perforated Cabinets

    We recommend that the roof be perforated with at least 20 percent open area, unless the cabinet only contains Cisco MDS 9100 Series switches, in which case the roof does not have to be perforated. We recommend an open or perforated cabinet floor to enhance cooling but it is not required.

  • Page 75: Appendix A Cabinet And Rack Installation

    The optional telco and EIA Shelf Bracket Kit (part number DS-SHELF=) can temporarily or permanently support the Cisco MDS 9100 Series during installation. Once the front rack-mount brackets are securely attached to the rack-mounting rails, the shelf bracket can be removed.

  • Page 76: Rack-Mounting Guidelines

    Caution Caution If installing this kit in an EIA rack, attach the switch to all four rack-mounting rails; the EIA rails may not be thick enough to prevent flexing of the shelf brackets if only two rails are used. Before rack-mounting the chassis, ensure that the cabinet or rack meets the following requirements: The specifications listed in the •...

  • Page 77: Before Installing The Shelf Brackets

    10-24 x 3/4-in. Phillips screws Installing the Shelf Bracket Kit into a Telco Rack 3 10-32 screws (2x) 4 Crossbar Cisco MDS 9100 Series Hardware Installation Guide Cisco MDS 9000 Family Telco and EIA Shelf Bracket Table A-1 lists the contents of the...
  • Page 78 Verify that the shelf brackets are at the same height (using the level or tape measure as desired). Step 3 Attach the crossbar to the rear of the shelf brackets as shown in Step 4 Cisco MDS 9100 Series Hardware Installation Guide Appendix A Cabinet and Rack Installation Figure A-1...

  • Page 79: Installing The Shelf Bracket Kit Into A Four-Post Eia Rack

    Verify that the shelf brackets are at the same height (using the level or tape measure as desired). OL-16187-01 Installing the Shelf Bracket Kit into an EIA Rack 4 Crossbar 5 10-32 screws (2x) Cisco MDS 9100 Series Hardware Installation Guide Cisco MDS 9000 Family Telco and EIA Shelf Bracket Figure A-2. Align the screw holes at...

  • Page 80: Installing The Switch On The Shelf Brackets

    12-24 or 10-24 screws. Installing the Switch on the Shelf Brackets This section provides general instructions for installing the switch on top of the shelf brackets. For detailed installation instructions, see the page 2-5.

  • Page 81: Removing The Shelf Bracket Kit (Optional

    Removing the Shelf Bracket Kit (Optional) The shelf bracket kit can be removed once the Cisco MDS 9100 Series switch has been installed in a four-post EIA rack, and both front rack-mount brackets and both C brackets are securely attached to the rack-mounting rails.
  • Page 82 Appendix A Cabinet and Rack Installation Cisco MDS 9000 Family Telco and EIA Shelf Bracket Cisco MDS 9100 Series Hardware Installation Guide A-10 OL-16187-01...

  • Page 83: Technical Specifications

    S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Technical Specifications This appendix includes the following technical specifications for the Cisco MDS 9100 Series Fixed Configuration Fabric Switch: Switch Specifications, page B-1 •...

  • Page 84: Appendix B Technical Specification

    Power Supply Requirements and Heat Dissipation Specifications, page B-3 • Connection Guidelines for AC-Powered Systems, page B-4 • Cisco MDS 9100 Series Hardware Installation Guide Cisco MDS 9100 Series Switch Specifications Specification Width = 17.16 in. (43.59 cm) Height = 1.72 in. (4.47 cm) Depth = 18.89 in.

  • Page 85: General Power Supply Specifications

    Power supply output voltage Output holdup time Power Supply Requirements and Heat Dissipation Specifications Table B-4 provides a sample calculation of power and heat dissipation for the Cisco MDS 9100 Series. Table B-4 Power and Heat Dissipation AC-Input Model Number/...

  • Page 86: Connection Guidelines For Ac-Powered Systems

    SFP Transceiver Specifications Connection Guidelines for AC-Powered Systems For connecting the Cisco MDS 9100 Series switch AC power supplies to the site power source, follow these basic guidelines • Each power supply should have its own dedicated branch circuit. •...

  • Page 87: General Specifications For Cisco Fibre Channel Sfp Transceivers

    Appendix B Technical Specifications Table B-6 lists the Fibre Channel SFP transceivers available through Cisco Systems for the Cisco MDS 9140 Switch and the Cisco MDS 9120 Switch. Table B-6 Cisco Fibre Channel SFP Transceivers for the Cisco MDS 9140 Switch and the...

  • Page 88: Environmental And Electrical Specifications For Cisco Fibre Channel Sfp Transceivers

    Cisco Gigabit Ethernet/Fibre Channel Transceivers Table B-10 lists the combination Gigabit Ethernet/Fibre Channel (GE/FC) SFP transceivers available through Cisco Systems for the Cisco MDS 9140 Switch and the Cisco MDS 9120 Switch. Table B-10 Cisco Gigabit Ethernet / Fibre Channel SFP Transceivers Part Number...

  • Page 89: Environmental And Electrical Specifications For Cisco Ge/Fc Sfp Transceivers

    Cisco CWDM SFP Transceivers Table B-13 lists the CWDM SFP transceivers available through Cisco Systems. These SFP transceivers are supported by the Cisco MDS 9140 and Cisco MDS 9120 switch. Table B-13 Cisco CWDM SFP Transceivers Part Number...

  • Page 90: General Specifications For Cisco Cwdm Sfp Transceivers

    Description Temperature, ambient operating Temperature, ambient nonoperating and storage Table B-17 provides the electrical specifications for CWDM SFP transceivers. Cisco MDS 9100 Series Hardware Installation Guide Specification 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610 nm 9/125 microns 100 km...

  • Page 91: Optical Specifications For Cisco Cwdm Sfp Transceivers

    Typical Max. λ (x-4) (x+1) (x+7) 0.08 SMSR -28.0 -7.0 λ 1450 1620 Cisco MDS 9100 Series Hardware Installation Guide SFP Transceiver Specifications Maximum Units Units Notes Available center wavelengths: 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610 nm nm/°...

  • Page 92: X2 Transceiver Specifications

    Use only Cisco X2 transceivers with the Cisco MDS 9134 Switch. Each Cisco X2 transceiver is encoded with model information that enables the switch to verify that the SFP transceiver meets the requirements for the switch.
  • Page 93 -8.2 (Min) -14.4 (Min) 4.0 (Max) -1.0 (Max) -4.7 (Min) -15.8 (Min) — — Cisco MDS 9100 Series Hardware Installation Guide X2 Transceiver Specifications Maximum Cabling Distance 40 km (24.8 miles) 15 m (49.2 ft.) Transmit and Receive Wavelength (nm)
  • Page 94 Appendix B Technical Specifications X2 Transceiver Specifications Cisco MDS 9100 Series Hardware Installation Guide B-12 OL-16187-01...

  • Page 95: Appendix

    S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Cable and Port Specifications This appendix includes the cables and connectors used with the Cisco MDS 9100 Series Fixed Configuration Fabric Switch, and it includes the following sections: Cables and Adapters, page C-1 •...

  • Page 96: Console Port

    (depending on your computer serial port) to connect the console port to a computer running terminal emulation software. Console Port Pinouts Table C-1 lists the pinouts for the console port on the Cisco MDS 9100 Series. Table C-1 Console Port Pinouts Signal 1.

  • Page 97: Mgmt 10/100 Ethernet Port

    Port Mode Signaling and Pinouts with DB-9 Adapter RJ-45 to DB-9 Terminal Adapter RJ-45 Pins RJ-45 Pin DB-9 Pin RJ-45 Interface Cable Connector RJ-45 (both ends) Cisco MDS 9100 Series Hardware Installation Guide MGMT 10/100 Ethernet Port Console Device Signal Table C-3 Console Device...

  • Page 98: Supported Power Cords And Plugs

    The standard power cords have an IEC C15 connector on the end that plugs into the switch. The optional jumper power cords have an IEC C15 connector on the end that plugs into the switch, and an IEC C14 connector on the end that plugs into an IEC C13 outlet receptacle.

  • Page 99: Jumper Power Cord

    C14 and C15 connectors on the optional jumper power cord for the Cisco MDS 9100 Series switch. The C15 connector connects into the C14 inlet on the Cisco MDS 9100 Series power supply, while the C14 connector connects into the C13 receptacle of a power distribution unit for a cabinet.
  • Page 100 Appendix C Cable and Port Specifications Supported Power Cords and Plugs Figure C-4 Connectors on Jumper Power Cord for Cisco MDS 9100 Series Cisco MDS 9100 Series Hardware Installation Guide OL-16187-01...

  • Page 101: Site Planning And Maintenance Records

    Site Planning and Maintenance Records This appendix includes a site planning checklist and maintenance records to use when installing the Cisco MDS 9100 Series Fixed Configuration Fabric Switch, and it includes the following sections: Site Preparation Checklist, page D-1 •...
  • Page 102 1. Verify that the power supply installed in the chassis has a dedicated AC source circuit. 2. UPS = uninterruptible power supply. 3. RFI = radio frequency interference. Cisco MDS 9100 Series Hardware Installation Guide Appendix D Site Planning and Maintenance Records...

  • Page 103: Contact And Site Information

    Contact person Contact phone Contact E-Mail Building/site name Data center location Floor location Address (line 1) Address (line 2) City State Zip code Country OL-16187-01 Contact and Site Information Cisco MDS 9100 Series Hardware Installation Guide Contact and Site Information...

  • Page 104: Chassis And Network Information

    Table D-3 Switch IP address Switch IP netmask Host name Domain name IP broadcast address Gateway/router address DNS address Modem telephone number Cisco MDS 9100 Series Hardware Installation Guide ______________________________________________________________ ______________________________________________________________ Network-Related Information Appendix D Site Planning and Maintenance Records OL-16187-01...

  • Page 105: Console Port C

    PC pinouts conventions cautions description notes CWDM transceivers description SFP transceiver specifications documentation additional publications 2-15 Cisco MDS 9100 Series Hardware Installation Guide 2-17 2-17 2-15 2-26 1-14 I-xii IN-1...
  • Page 106 Fibre Channel Bladeswitch Fibre Channel ports checking connecting front rack-mount brackets installing 2-13 Gigabit Ethernet/Fibre Channel SFP transceiver specifications humidity specifications Cisco MDS 9100 Series Hardware Installation Guide IN-2 IBM BladeCenter installation cabinet or rack installation guidelines options pre-installation rear-facing 2-30 2-30...
  • Page 107 LEDs system ground location technical specifications airflow humidity power supplies temperature voltage temperature specifications voltage specifications (table) X2 transceivers 1-14 specifications Cisco MDS 9100 Series Hardware Installation Guide Index 2-24 1-10 2-23 B-10 IN-3...
  • Page 108 Index Cisco MDS 9100 Series Hardware Installation Guide IN-4 OL-16187-01...

Table of Contents

Save PDF