Page 1 TE2000 Series User’s Guide If you need assistance: VirtualTech http://virtualtech.toshiba.com ® InTouch Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see Chapter 9 on page TOSHIBA ™ Center of this guide.
Page 2 DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE LIABLE FOR ANY DAMAGE OR LOSS OF DATA, OR ANY OTHER DAMAGE RESULTING THEREFROM. WHEN COPYING OR TRANSFERRING YOUR DATA, PLEASE BE SURE TO CONFIRM WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR TRANSFERRED.
Page 3 DISCLAIM ANY AND ALL LIABILITY ARISING OUT OF THE USE OF THE COMPUTER PRODUCTS IN ANY CRITICAL APPLICATIONS. IF YOU USE THE COMPUTER PRODUCTS IN A CRITICAL APPLICATION, YOU, AND NOT TOSHIBA, ASSUME FULL RESPONSIBILITY FOR SUCH USE. FCC Notice “Declaration of Conformity Information”...
Page 4: Industry Canada Requirement
: Only peripherals complying with the FCC Class B limits may be attached to this computer. Operation with non-compliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s serial port, parallel port, monitor port,...
Page 5: Type Of Service
When you are notified, you will be given the opportunity to correct the problem and informed of your right to file a complaint with the FCC. In the event repairs are ever needed on your modem, they should be performed by Toshiba Corporation or an authorized representative of Toshiba Corporation.
Page 6: Fax Branding
Disconnection If you should ever decide to permanently disconnect your modem from its present line, please call the telephone company and let them know of this change. Fax branding The Telephone Consumer Protection Act of 1991 makes it unlawful to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it...
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The Toshiba Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision B), as defined and...
Page 8: Wireless Lan And Your Health
Wireless LAN device prior to turning on the equipment. Regulatory Information The Toshiba Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 9: Interference Statement
Caution: Exposure to Radio Frequency Radiation The radiated output power of the Toshiba Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the Toshiba Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 10: Safety Instructions
Consult the dealer or an experienced radio/TV technician for help. Toshiba is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this Toshiba Wireless LAN Mini PCI Card, or the substitution or attachment of connecting cables and equipment other than specified by Toshiba.
Page 11 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 12 EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING. TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN THE PRODUCT AND THE MANUAL.
Page 13 AccuPoint II, Fn-esse, Noteworthy, and SelectBay are registered trademarks, SelectServ, Ask IRIS Online, and VirtualTech are trademarks, and InTouch is a registered trademark of Toshiba America Information Systems, Inc. and/or Toshiba Corporation. IBM and Wake on LAN are registered trademarks and PS/2 is a trademark of IBM Corporation.
Page 14 Computer disposal information This product contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government or the Electronic Industries Alliance at www.eiae.org.
Page 15: Table Of Contents
Contents Chapter 1: Introduction... 23 This guide... 24 Safety icons... 24 Other icons used... 25 Other documentation... 26 Service options... 26 Chapter 2: Finding Your Way Around... 27 Making sure you have everything... 27 Front with the display panel closed... 28 Back with rear panel closed ...
Page 16 Opening the display panel... 48 Turning on the power ... 48 Using the AccuPoint II pointing device... 50 Setting up your software... 52 Registering your computer with Toshiba... 52 Setting up other devices... 52 Turning off the computer... 53 Closing the display panel... 53 Chapter 4: Connecting Other External Devices...
Page 17 Installing a memory module... 68 Removing a memory module... 70 Using Slim SelectBay Removing a module from the Slim SelectBay Inserting a module into the Slim SelectBay Inserting and removing hard drives ... 74 Inserting and removing PC Cards... 76 Inserting a PC Card...
Page 18 Powering down the computer... 102 Using Turn Off Computer... 102 Using Hibernation... 106 Using Standby... 108 Toshiba’s online resources... 112 Chapter 6: Mobile Computing... 113 Toshiba’s energy-saver design... 113 Running the computer on battery power... 113 Charging the batteries... 114 Monitoring battery power...
Page 19 Connecting the modem to a telephone line... 131 Connecting your computer to a network ... 131 An overview of using the Internet... 134 The Internet... 134 The World Wide Web ... 134 Internet Service Providers... 135 Connecting to the Internet ... 135 Surfing the Internet...
Page 20 Adjusting the quality of the external display... 174 Video limitations... 175 Using the Wi-Fi Accessing the Wi-Fi Using an expansion device... 176 Chapter 9: Toshiba Utilities... 177 Fn-esse... 178 Starting Fn-esse... 178 Using the keyboard or pointing device to assign keys 180 Viewing existing key assignments... 181 Changing or removing existing key assignments ...
Page 21 Security... 185 Power Management... 186 Slim SelectBay Mobile Extension Service... 188 Slim SelectBay Toshiba Hardware Setup ... 189 Toshiba Power Saver utility... 192 Enabling Hibernation... 193 Setting user passwords... 194 Using an instant password ... 194 Setting a user password... 195 Disabling a user password...
Page 22 Develop good computing habits... 229 If you need further assistance... 231 Before you call... 231 Contacting Toshiba... 231 Other Toshiba Internet Web sites ... 233 Toshiba’s worldwide offices ... 233 Appendix A: Windows Appendix B: Hot Keys... 257 Appendix C: Power Cable Connectors... 263 Glossary...
Page 23: Chapter 1: Introduction
Your operating system offers exciting features and easy Internet access. NOTE: If your operating system is Windows Toshiba suggests, when in the Control Panel, that you switch to Classic View to see and use the functions and utilities available with the Toshiba program icons.
Page 24: This Guide
Introduction This guide This guide This guide introduces the computer’s features. You can: Read the entire guide from beginning to end Skim through and stop when a topic interests you Use the table of contents and the index to find specific information If you are new to computers or have not used a notebook computer before, read through this chapter to familiarize yourself with the...
Page 25: Other Icons Used
WARNING: This icon indicates the existence of a hazard that could result in bodily injury if the safety instruction is not observed. CAUTION: This icon indicates the existence of a hazard that could result in damage to equipment or property if the safety instruction is not observed.
Page 26: Other Documentation
Toshiba and explains how to order them. The Microsoft which explains the features of the operating system. Service options Toshiba offers a full line of service options built around its ™ SelectServ Toshiba’s Web site at Toshiba.com. If you have a problem or need to contact Toshiba, see Something Goes Wrong”...
Page 27: Chapter 2: Finding Your Way Around
Chapter 1 Finding Your Way Around This chapter presents a grand tour of your TE2000 Series computer. It serves as a reference to locate specific parts of the computer. Making sure you have everything Before you do anything else, consult the Quick Start card shipped with your computer to make sure you received everything.
Page 28: Front With The Display Panel Closed
Finding Your Way Around Making sure you have everything Front with the display panel closed Infrared port Sliding the display latch opens the computer’s display panel. For more information, see page 34 The system indicator panel consists of several lights that provide information about various system functions.
Page 29: Back With Rear Panel Closed
Back with rear panel closed Cooling vent DC IN socket DC IN socket—Lets you plug in the AC adapter. Cooling vent—Provides ventilation to keep the computer’s processor from overheating. The vent lets the processor continue performing at its maximum speed. CAUTION: To prevent possible overheating of the computer’s processor, make sure you don’t block the cooling vent.
Page 30: Back With Rear Panel Open
Finding Your Way Around Making sure you have everything ™ PS/2 port—Lets you connect an optional PS/2-compatible mouse or keyboard. You can use an optional Y-cable to connect both a mouse and a keyboard to the port. Back with rear panel open RGB port Parallel port RGB port—Lets you connect an external monitor or projector.
Page 31: Right Side
Right side HDD bay cover Speaker—Lets you hear stereo sound from a CD or DVD in addition to system alarms and audible warnings associated with your software. Left side Speaker Video-out port * for systems with optional Wi-Fi Speaker—Lets you hear stereo sound from a CD or DVD in addition to system alarms and audible warnings associated with your software.
Page 32 Finding Your Way Around Making sure you have everything The PC Card lock allows you to secure your PC Cards in the slots. Slide the button to the right to lock the PC Cards. This lock mechanism can be secured in place using a computer lock. See “Using a computer lock”...
Page 33: Underside
Underside Slim SelectBay release Slim SelectBay slot PC card lock Battery module—Lets you to use your computer when a standard electrical outlet is not available. For further information about using the battery, see power” on page Battery lock—Locks the battery in place to prevent accidental removal.
Page 34: Keyboard And Display Features
Finding Your Way Around Keyboard and display features The expansion memory cover protects the slot in which you can install up to two memory modules. For more information on expanding your computer’s memory, see page Keyboard and display features Front with the display panel open To view the front of the computer with the display panel open: Locate the display latch on the front of the computer.
Page 35 Adjust the display panel to a comfortable viewing angle. CAUTION: To avoid damaging the display panel, be careful when opening and closing it. Never force the panel beyond the point where it moves easily, and never use it to lift the computer.
Page 36: Indicator Panel Lights
Finding Your Way Around Keyboard and display features turn system functions on and off. For more information on how to use the internal keyboard, see For information on using an external keyboard, see external (optional) devices” on page Keyboard indicator panel—These lights provide information about various keyboard functions.
Page 37: Keyboard Indicator Panel Lights
Main battery light—Indicates the status of the main battery. Flashes amber when you are running on battery power and the battery charge is running low. Does not glow when you are running on battery power and the battery charge is not running low. Glows amber when you are connected to AC power and the battery is charging.
Page 38 Finding Your Way Around Keyboard and display features Numlock light—Glows when the numeric overlay is on. When this light is on, pressing an overlay key produces the white number printed on the right front of the key instead of the letter printed on the top of the key.
Page 39: Chapter 3: Getting Started
Chapter 2 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your computer. Selecting a place to work Your computer is designed to be used in a variety of locations and situations.
Page 40: Keeping Yourself Comfortable
AC power source and let it dry out completely before turning it on again. If the computer does not operate properly after you turn it back on, contact a Toshiba service representative or your network administrator. Equipment that generates a strong electromagnetic field, such as large stereo speakers (other than speakers that are connected to the computer) or speakerphones.
Page 41: Placement Of The Computer
This section provides hints on avoiding strain and stress injuries. For more information, consult books on ergonomics, repetitive- strain injury, and repetitive-stress syndrome. Placement of the computer Proper placement of the computer and external devices is important to avoid stress-related injuries. Consider the following when placing your computer.
Page 42 Getting Started Selecting a place to work Below eye level Footrest Correct posture and positioning of the computer Position your chair so that the keyboard is at or slightly lower than the level of your elbow. You should be able to type comfortably with your shoulders relaxed and your forearms parallel to the floor.
Page 43: Work Habits
Position the display panel or external monitor so that sunlight or bright indoor lighting does not reflect off the screen. Use tinted windows or shades to reduce glare. Avoid placing your computer in front of a bright light that shines directly into your eyes. If possible, use soft, indirect lighting in your computer work area.
Page 44: Other Precautions
Getting Started Other precautions Other precautions Your computer is designed to optimize safety, minimize strain, and withstand the rigors of portability. However, you should observe certain precautions to further reduce the risk of personal injury or damage to the computer. CAUTION: Do not apply heavy pressure to the computer or subject it to sharp impacts.
Page 45: Setting Up Your Computer
Setting up your computer TECHNICAL NOTE: You must complete all set up steps up to “Registering your computer with Toshiba” on page 52 adding external or internal components to your computer. These components include, but are not limited to, a mouse, keyboard, printer, memory, and PC cards.
Page 46: Connecting To A Power Source
AC power source and to charge the computer’s batteries. Power cable and AC adapter CAUTION: Use of the wrong AC adapter could damage your computer. Toshiba assumes no liability for any damage in such cases. Never pull directly on the power cable to unplug it. Hold the power plug when removing the cable from the outlet.
Page 47 Connecting the AC adapter cable to the computer Insert the plug end of the power cable into a live wall outlet. The AC power light green. If the main battery is present, the battery light Amber while the battery is charging Green when the battery is fully charged If the battery light flashes amber during charging, either the battery pack is malfunctioning, or it is not receiving input...
Page 48: Turning On The Computer
Getting Started Turning on the computer Charging the battery Your computer came with its battery already installed. Before using the battery to power the computer, you must charge it. To charge the battery, leave the computer plugged in to an AC power source for at least three hours with the computer turned off.
Page 49 Check to ensure that any floppy drives are empty. Press and hold the power button in until the on/off light on the system indicator panel glows green—about one second. Turning on the power For the meaning of each light on the system indicator panel, “Indicator panel lights”...
Page 50: Using The Accupoint Ii Pointing Device
Getting Started Using the AccuPoint II pointing device Using the AccuPoint II pointing device The button in the middle of the keyboard is the AccuPoint II pointing device. Together with the primary and secondary AccuPoint II buttons, it provides the same functionality as a mouse —...
Page 51 Getting Started Using the AccuPoint II pointing device The primary AccuPoint II button corresponds to the primary (typically left) mouse button. When a step instructs you to click or choose an item, move the cursor to the item, then press and release the primary AccuPoint II button.
Page 52: Setting Up Your Software
Your computer restarts automatically. Registering your computer with Toshiba To register your computer with Toshiba, you may either click on the desktop icon to do so electronically, or fill in and mail the registration card that shipped with your system.
Page 53: Turning Off The Computer
Turning off the computer It’s generally a good idea to turn off your computer when you are not using it. If you are using the computer for the first time, leave the computer plugged into a power source (even though the computer is off) to fully charge the main battery.
Page 54 Getting Started Turning off the computer If you have an action feature set, the computer will perform either: Nothing, Standby, or Hibernate (see “Enabling Hibernation” on page 193).
Page 55: Chapter 4: Connecting Other External Devices
Connecting Other External Devices This chapter describes how to connect devices that can increase the capabilities of your TE2000 Series computer. Using external display devices Your computer comes with a built-in LCD display, but you can also connect three different types of external display devices to one of two available video ports: A television via the video-out (composite) port.
Page 56: Connecting The Display Device
For the best video quality, always use a properly shielded cable. HINT: Toshiba recommends using a cable no longer than 20 feet (approximately 6 meters). Using a poor quality cable may result in a dull or fuzzy picture, poor color, ghosting, video noise, or loss of video.
Page 57: Directing The Display Output When You Turn On The Computer
Connect the other end of the video port adapter cable to the video-out port on the left side of the computer. Turn on the external video device. Set the display mode by pressing Display Properties settings. For more information, see “Directing the display output when you turn on the computer”...
Page 58: Adjusting The Quality Of The External Display
Connecting Other External Devices Using external display devices Built-in display only Built-in display and external device simultaneously External device only TV (or other external video device) only Release the TECHNICAL NOTE: You can also change these settings using the Display Properties Box. For more information on switching the display output, see “Connecting the display device”...
Page 59: Using An External Keyboard
desktop will appear on the screen. You can view the “lost” area by scrolling to it. Since most televisions and video projectors overscan by 15 to 20 percent, some of the desktop will be outside the viewing area. You can view the edge of the desktop by scrolling to it. If you use the display hot key ( output with the LCD Display Stretch option enabled and the display area (resolution) set to 640 x 480 or 800 x 600, the...
Page 60: Making Your External Keyboard Emulate The Fn Key
Making your external keyboard emulate the Fn key An external keyboard does not have the TE2000 Series computer’s built-in keyboard. If you use the computer’s hot keys or have set up key combinations in Fn-esse you’ll probably miss these features when using an external keyboard.
Page 61: Using A Mouse
To set the PS/2 mouse to work simultaneously with the AccuPoint II: Click Start, Settings, then point to Control Panel. Double-click the Toshiba HWSetup icon. Select the Pointing Devices tab, then click Simultaneous. Connecting Other External Devices Using a mouse...
Page 62: Connecting A Local Printer
Connecting Other External Devices Connecting a local printer Connecting a local printer NOTE: Read the documentation that came with your printer. Follow the manufacturer’s instructions when connecting a local printer. NOTE: You must supply the proper printer cable. If one did not come with your printer, you may purchase one from an electronics or computer store.
Page 63 Connecting Other External Devices To the computer Identifying the ends of a parallel printer cable Plug the printer’s power cable into a live electrical outlet. See your printer documentation for additional configuration steps. For more information on getting your printer to print, see “Printing your work”...
Page 64: Connecting An External Diskette Drive
Connecting Other External Devices Connecting an external diskette drive Connecting an external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5-inch diskettes. An external USB diskette drive To connect an optional external USB diskette drive, connect the cable to one of the USB ports.
Page 65: Connecting External Speakers Or Headphones
Connecting external speakers or headphones Connecting external speakers or headphones To attach an external stereo output device: Locate the headphone jack on the front of the computer. Using any necessary adapters, plug the cable from the external audio device into the headphone jack. The headphone jack requires a 3.5 mm 16-ohm stereo jack.
Page 66: Using An Expansion Device
When you return, you can quickly connect your computer and have immediate access to all the devices. Toshiba offers the following expansion devices for the TE2000 Series: Advanced Port Replicator For more information, see the documentation that comes with the device.
Page 67: Adding Memory
HINT: To purchase additional memory modules, see the accessories information packaged with your system or visit toshibaaccessories.com Your TE2000 Series computer is equipped with up to two memory module. The two memory slots in this computer provide various memory configurations. When additional memory is added, or original memory replaced, it is recommended that you use only compatible memory.
Page 68: Installing A Memory Module
Connecting Other External Devices Adding memory Total Memory 128 MB 256 MB 384 MB 512 MB 1 GB Installing a memory module Additional memory modules can be installed in the memory expansion slots on the base of the computer. You will need a standard Phillips no.1 screwdriver for this procedure.
Page 69 Connecting Other External Devices Close the display panel and remove any cables you may have connected. Turn the computer upside down. Locate and remove the screws that hold the cover plate in place, and lift the cover off of the memory module bay. Removing the memory module cover CAUTION: Static electricity can damage the memory module.
Page 70: Removing A Memory Module
Connecting Other External Devices Adding memory Inserting the memory module into the slot Replace the cover plate and the screws. Turn the computer over and restart it. When you turn on the computer, it automatically recognizes the additional memory. Removing a memory module If you need to remove a memory module: Complete steps 1–6 in “Installing a memory module”...
Page 71 Connecting Other External Devices Pulling the clips away from the memory module Carefully remove the module from the slot. Replace the cover plate and screws. Turn the computer over and restart it. Adding memory...
Page 72: Using Slim Selectbay ® Modules
Connecting Other External Devices Using Slim SelectBay® modules Using Slim SelectBay The Slim SelectBay gives you additional flexibility. By inserting and removing Slim SelectBay modules, you can configure your computer for the task at hand without having to carry unnecessary components with you when you travel.
Page 73 Connecting Other External Devices Using Slim SelectBay® modules on the task bar. After the module is stopped, it is safe to remove. Slide the Slim SelectBay ejection bar towards the front of the computer. Unlatching the Slim SelectBay Slide the module out of the computer. Sliding the module out If you are removing the weight saver, retain it for transporting the computer when no other module is installed in the...
Page 74: Inserting A Module Into The Slim Selectbay
Connecting Other External Devices Inserting and removing hard drives Inserting a module into the Slim SelectBay To install a module into the Slim SelectBay, simply slide the module all the way into the Slim SelectBay. Inserting and removing hard drives Depending upon the original hard drive installed in your computer, you may wish to increase storage capacity.
Page 75 Connecting Other External Devices Inserting and removing hard drives Lift the hard drive bay cover to expose the hard drive. Grasp the plastic tab on the exposed edge of the hard drive and pull it to remove the hard drive from the computer. Removing the hard drive from the computer Install the new hard drive by sliding it into the hard drive bay and pressing it firmly until it locks.
Page 76: Inserting And Removing Pc Cards
Inserting and removing PC Cards Inserting and removing PC Cards Your TE2000 Series computer comes with two stacked PC Card slots and supports three types of PC Cards: Type I cards—You can install up to two of these cards, one in each slot.
Page 77: Removing A Pc Card
If you have a Type III card, insert it into the lower part of the slot. If you have a Type I or Type II card, insert it into either the upper or lower part of the slot. Inserting a PC Card When the card is almost all the way into the slot, push firmly, but gently, to ensure a firm connection with the computer.
Page 78: Setting Up A Pc Card For Your Computer
Connecting Other External Devices Inserting and removing PC Cards Locate the PC Card ejection button that corresponds to the slot in which your PC Card is installed. The top tab releases a card in the upper slot. The bottom tab releases a card in the lower slot.
Page 79: Connecting Your Modem To A Telephone Line
Connecting your modem to a telephone line Connecting your modem to a telephone line Your computer comes with a built-in modem that can be connected to a standard voice-grade telephone line. The modem allows you to: Access the Internet. Communicate with your office’s local area network (LAN), or a larger corporate wide area network (WAN).
Page 80 Connecting Other External Devices Connecting your modem to a telephone line Connecting to a wall jack CAUTION: The modem is designed for use with a standard analog telephone line. Don’t connect the modem to a digital telephone line. A digital line will damage the modem. Now you’re ready to send a fax or use the modem to connect to an online service or the Internet.
Page 81: Chapter 5: Learning The Basics
Chapter 4 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 82: Using The Keyboard
Learning the Basics Using the keyboard Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. It’s easy to put off backing up because it takes time. However, if your hard disk suddenly fails, you will lose all the data on it unless you have a separate backup copy.
Page 83: Character Keys
Keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: The space bar creates a space character instead of just passing over an area of the page. The lowercase letter l (el) and the number 1 are not interchangeable.
Page 84: Ctrl, Fn, And Alt Keys
Learning the Basics Using the keyboard Press right side of the enhanced keyboard. Press the numeric pad of the enhanced keyboard. Ctrl, Fn, and Alt keys Ctrl Ctrl, Fn, and Alt keys , and Ctrl program you are using. For more information, see your program documentation.
Page 85: Overlay Keys
Your computer’s keyboard has two keys that have special functions in Windows: Start key—Opens the Start menu Application key—Has the same function as the secondary mouse (or AccuPoint II) button Overlay keys The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay.
Page 86 Learning the Basics Using the keyboard You can still use the overlay keys to type alphabetic characters while the numeric overlay is on. To do so: For lowercase letters, hold down For uppercase letters, hold down both type the letters. To use the cursor control keys when the numeric overlay is on: Press and hold down overlay keys.
Page 87: Starting A Program
To disable the cursor control overlay, hold down the press again. The cursor control mode light on the keyboard indicator panel goes out. Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use My Computer or Windows If you prefer to open the program first, you have four options.
Page 88: Starting A Program From Windows ® Explorer
Learning the Basics Starting a program Click the program, in this example, Wordpad. Wordpad opens. To close the program, click the Close button in the upper- right corner of the program’s window. Starting a program from Windows If a program is not listed in the Programs menu, you can start it from Windows of your computer’s contents as a hierarchy or “tree.”...
Page 89: Starting A Program From The Run Dialog Box
To close the program, click the Close button in the upper- right corner of the program’s window. Starting a program from the Run dialog box This example uses the Run command to start Wordpad: Click Start, then click Run. The Run dialog box appears. Sample Run dialog box In the Run dialog box: If you know the program’s location, type the command...
Page 90: Saving Your Work
Learning the Basics Saving your work Saving your work Before you turn off the computer, save your work on the hard disk drive or a diskette. This is one of the most important rules of computing. TECHNICAL NOTE: Save your data even when you are using the Standby command, in case the main battery discharges before you return to work.
Page 91: File Names
A sample Save As dialog box Choose the drive and folder where you want your file to be stored. Type a file name, then click Save. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.
Page 92: Printing Your Work
Learning the Basics Printing your work Using a file extension Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format. For example, Microsoft Any file name with an extension of “.doc” is assumed to be a ®...
Page 93: Using A Compact Disc Drive
Click Print. Using a compact disc drive Your TE2000 Series computer may have a CD-ROM, CD-RW, DVD-ROM, or DVD/CD-RW drive. If a CD-ROM or DVD-ROM drive is not currently installed in the Slim SelectBay, follow the instructions in SelectBay®...
Page 94: Inserting Compact Discs
Learning the Basics Using a compact disc drive Drive in-use indicator light Eject button Manual eject hole A DVD/CD-ROM drive Drive in-use indicator light—Indicates when the CD-ROM or DVD-ROM drive is in use. Eject button—Press to release the disc tray. CAUTION: Do not press the eject button or turn off the computer while the Drive in-use indicator light is glowing.
Page 95 The disc tray slides partially out of the drive (about 1 inch). HINT: The drive won’t open if the computer’s power is off. Grasp the tray and pull it fully open. The drive tray fully extended Hold the disc by its edges and check that it is free of dust. If the disc is dusty, clean it as described in and DVDs”...
Page 96: Removing Compact Discs
Make sure the disc is completely on the spindle and is lying flat on the tray. CAUTION: If you insert the disc incorrectly, it may jam the drive. If this happens, contact your Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
Page 97: Caring For Cds And Dvds
Gently push the tray in to close it. To remove a compact disc with the computer turned off: Insert a slender object, such as a straightened paper clip, into the manual eject hole. Gently pull the tray out until it is fully open, remove the disc, and place it in its protective cover.
Page 98: Using Pc Cards
Learning the Basics Using PC Cards Using PC Cards TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check the package to make sure they conform to the PCMCIA 2.1 standard (or later). Other cards may work with your computer, but are likely to be much more difficult to set up and use.
Page 99: Using Your Computer At The Office
Using your computer at the office By connecting an external monitor, external full-size keyboard, and a mouse, you can work with your notebook as if it were a standard office computer. An external monitor or projector connects to the RGB port. An external PS/2-compatible keyboard or a PS/2 mouse connects to the PS/2 port.
Page 100: Caring For Your Computer
Never use harsh or caustic chemical products to clean the computer. To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Ask your Toshiba dealer for suggestions for appropriate cleaning products. 113.
Page 101: Moving The Computer
Although your notebook computer is built to withstand reasonable shock and vibration, transport it in a carrying case for long trips. You can purchase a carrying case from your Toshiba dealer, through the accessories information packaged with your system, or visit toshibaaccessories.com...
Page 102: Powering Down The Computer
Learning the Basics Powering down the computer Before you can use the modem, you must connect it to a standard voice-grade telephone line. See telephone line” on page 79 Powering down the computer NOTE: Pushing the power button before shutting down the Windows work.
Page 103 When you start up again, the computer runs a self-test and loads the operating system. You must open any programs and files you want to use. Factors when choosing Turn Off or Shut down: No power is used while the computer is shut down. This is the most efficient mode if you will be away from your computer for an extended time.
Page 104: Shutting Down More Quickly
To use either of these methods, you first need to turn it on in Toshiba’s Power Saver utility. Open the Start menu, then click Control Panel. In the Control Panel window, double-click the Toshiba Power Saver icon. NOTE: The Control Panel window must be set to Classic View to access the Toshiba Power Saver icon.
Page 105 Click All to apply the settings whenever when you are using battery power or outlet power. Click OK, Click OK again, then close the Control Panel. NOTE: For more information about the Power Saver utility, “Toshiba Power Saver utility” on page Learning the Basics Powering down the computer 192.
Page 106: Using Hibernation
Learning the Basics Powering down the computer Starting again after Shut down To start the computer up again, press the power button until the on/ off light changes to green. If you shut down the computer by closing the display panel, you can start it again by opening the display panel.
Page 107 Configuring your computer for Hibernation: Open the Start menu, then click Control Panel. In the Control Panel window, double-click the Toshiba Power Saver icon. NOTE: The Control Panel window must be set to Classic View to access the Toshiba Power Saver icon.
Page 108: Using Standby
The computer is now set to automatically go into Hibernation when your option settings occur. NOTE: For more information about the Power Saver utility, “Toshiba Power Saver utility” on page Once the computer is configured, put the computer into Hibernation mode by either pressing the power button or closing the display panel, depending on the hibernation options taken.
Page 109 When starting up again, the computer returns to the mode in which you left it, including all open programs and files you were using. NOTE: If you power down using the Standby command and the main battery discharges fully, your information will be lost.
Page 110 To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. Open the Start menu, then click Control Panel. In the Control Panel window, double-click the Toshiba Power Saver icon. NOTE: The Control Panel window must be set to Classic View to access the Toshiba Power Saver icon.
Page 111 Click OK. Click OK again, then close the Control Panel. NOTE: For more information about the Power Saver utility, “Toshiba Power Saver utility” on page Starting again from Standby mode To start up the computer from Standby mode, press the power button until the on/off light changes to green.
Page 112: Toshiba's Online Resources
Learning the Basics Toshiba’s online resources Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Page 113: Chapter 6: Mobile Computing
It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at is maximum energy efficiency, so that you can use it for longer periods of time while traveling.
Page 114: Charging The Batteries
Mobile Computing Running the computer on battery power In addition to the main battery, you may also have a second battery installed in the Slim SelectBay. If you travel and need to work for many hours without an AC power source, you may purchase a battery module for use in the computer’s Slim SelectBay, or carry additional charged battery packs with you.
Page 115: Monitoring Battery Power
charge completely, especially if you’ve had the computer turned off for a long time. To recharge the RTC battery, plug the computer in and turn it on for at least 24 hours. Monitoring battery power The computer’s main battery light gives you an indication of the main battery’s current charge: Green indicates the AC adapter has fully charged the battery.
Page 116 Mobile Computing Running the computer on battery power In the Control Panel window, double-click the Toshiba Power Saver icon. NOTE: The Control Panel window must be set to Classic View to access the Toshiba Power Saver icon. The Toshiba Power Saver Properties dialog box appears.
Page 117: What To Do When The Battery Alarm Sounds
Control Panel. For more information, see utility” on page What to do when the battery alarm sounds Your TE2000 Series computer can be configured to warn you of a low battery charge condition so you may take the necessary steps to save your work.
Page 118: Changing Batteries
Mobile Computing Changing batteries Select the appropriate Running on Batteries option. Click the Details... button. Select the Alarms tab and adjust the settings to suit your needs. Before your computer runs out of battery power, save your data and take one of the following actions: Suspend or shut down your computer.
Page 119 Battery release latch Pull the discharged battery module out of the computer. Removing the discharged battery WARNING: If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately following the advice in page 121.
Page 120: Taking Care Of Your Battery
Mobile Computing Taking care of your battery The battery pack has been designed so that you cannot install it with reverse polarity. CAUTION: If the battery does not slide into the slot easily, move the battery release lock to the unlocked position and try again.
Page 121: Maximizing Battery Life
If not, check with your local government for information on where to recycle or dispose of old batteries. Only use replacement batteries recommended by Toshiba. CAUTION: The computer uses a lithium ion battery, which can explode if not handled or disposed of properly. Putting spent batteries in the trash is not only irresponsible, it may also be illegal.
Page 122: Power Usage Modes In Windows Xp Professional
In Windows power usage modes or select your own combination of power management options. To do this: Click Start, then Control Panel, and click on the Toshiba Power Saver icon. NOTE: Control Panel must be set to Classic View for the Toshiba Power Saver icon is visible.
Page 123: Using A Hot Key To Set The Power Usage Mode
Release the The pop-up window disappears. You’re now in the selected mode. For more information on setting the battery power usage mode, “Toshiba Power Saver utility” on page “Toshiba Power Saver utility” on simultaneously to display the power usage , press key.
Page 124: Additional Options For Power
Depending on the amount of time you spend away from external power sources, the capacity of one battery pack may be sufficient for your needs. However, if you need more portable power, Toshiba provides these options: Purchase extra battery packs. Install a secondary battery module in the Slim SelectBay. See “Using Slim SelectBay®...
Page 125: Chapter 7: Exploring Your Options
Chapter 6 Exploring Your Options In this chapter, you will explore some of the special features of your TE2000 Series notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in the ® Windows...
Page 126: Finding Your Way Around The Desktop
Exploring Your Options Exploring the desktop Finding your way around the desktop Common desktop features include icons, the Start button, and the taskbar. Icons Start button Sample Windows Icons An icon represents a file or program that can be quickly activated by double-clicking the icon.
Page 127: Start Button
Internet Explorer — The Microsoft to the Internet. Your desktop may contain other icons depending on your configuration. See Windows more specific information on each icon and how to use it. Start button NOTE: See Appendix A for Start button information specific to ®...
Page 128: Exchanging Data With Another Computer
Exploring Your Options Exchanging data with another computer You can personalize the taskbar to include not only shortcut icons but also your favorite Internet URL addresses. DEFINITION: URL stands for Uniform Resource Locator, which is the address that defines the route to a file on the Web or any other Internet facility.
Page 129: Getting Help Transferring Files
In order to connect to the Internet, use an online service, or communicate across the telephone lines with another computer, you need: A modem (one comes with your TE2000 Series computer) A telephone line A browser or communications program An Internet Service Provider (ISP) or online service if you...
Page 130 Exploring Your Options Exchanging data with another computer The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings. DEFINITION: Although the terms are often used interchangeably, the serial port and COM port are really two different things.
Page 131: Connecting The Modem To A Telephone Line
Exchanging data with another computer To verify that the modem is set up properly, select the modem you wish to check and then click Properties to bring up the dialog box with information specific to that modem. Click the Diagnostics tab, and then click Query Modem. Windows XP communicates with the modem and displays identifying information reported by the modem.
Page 132 Wirelessly, you need an optional wireless networking PC Card or an optional Wi-Fi about wireless networking, refer to your wireless network device documentation or contact your authorized Toshiba service provider. Setting up the connection To set up an office connection, consult your network administrator for network settings and additional considerations.
Page 133: Setting Up A Wireless Connection
Exchanging data with another computer Double-click the System icon, click the Hardware tab, and then click the Device Manager button. NOTE: The Control Panel window must be set to Classic View to access the System icon. Select the network adapter in Network Adapters. Click the Properties icon on the toolbar.
Page 134: An Overview Of Using The Internet
™ Your Wi-Fi system. It is recommended that you do not remove the module from your computer. For assistance, contact a Toshiba Wireless Authorized Service Provider. An overview of using the Internet The following sections give a quick introduction to the Internet...
Page 135: Internet Service Providers
The World Wide Web offers information as text, images, audio, or video to be referenced from anywhere in the world. Special programs called Web browsers are specifically designed to work with HTTP. They make it easier to connect to a particular network address and send and receive information.
Page 136: Surfing The Internet
Exploring Your Options An overview of using the Internet Start your Web browser. Have your modem dial the ISP’s telephone number, and establish a connection with the ISP’s computer. If you are using your computer at the office, then you probably connect to the Internet through your company’s network.
Page 137: Uploading And Downloading Files From The Internet
one-on-one or in groups, by typing messages which are instantly viewed by others on their computer screens. Internet news groups A newsgroup is similar to a chat room, but instead of using a dedicated site to converse about a specialized subject with others in real-time, it uses a Web site as a clearinghouse where all the messages are placed, like a gigantic bulletin board.
Page 138: Playing An Audio Cd
Exploring Your Options Exploring audio features Playing an audio CD Insert an audio CD and close the disc tray. The CD begins to play. If the computer is turned on, Windows Media the CD begins to play. You can use the Windows Media program to control the CD.
Page 139: Creating A Cd
Creating a CD Your computer may come with a DVD-ROM/CD-RW multifunction drive that allows you to: Play pre-recorded DVDs Play pre-recorded CDs Read and write files (including music) to a CD-Recordable (CD-R) or CD-Rewritable (CD-RW) disc. The Easy CD Creator program controls the drive’s CD-RW features.
Page 140: Adjusting Recording Quality
Exploring Your Options Exploring audio features Positioning Sample Sound Recorder screen Click the Record button. Speak normally into the microphone. When you’ve finished recording, click the Stop button. The Sound Recorder window displays the new sound file as a waveform. NOTE: You can only record 60 seconds at a time.
Page 141: Using External Speakers Or Headphones
In the Sound Recorder window, click Edit, then click Audio Properties. In the Audio Properties dialog box, adjust the Recording Volume, Preferred device, and Preferred quality. Click OK. Your new settings take effect the next time you record. Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers.
Page 142: Playing Dvds
Exploring Your Options Playing DVDs Playing DVDs TECHNICAL NOTE: For optimum DVD performance, always play DVDs while your computer is connected to AC power. If your computer has a DVD-ROM, or DVD-ROM/CD-RW drive, you can use InterVideo WinDVD to play DVDs. Your computer comes with WinDVD pre installed.
Page 143: Using The Windvd Toolbar
Time slider Playback speed slider Current chapter indicator Current time slot indicator Sample WinDVD video window with the control panel Using the WinDVD toolbar The WinDVD window contains a toolbar at the top and a status bar at the bottom. If the toolbar or status bar does not appear, you can display them by following the instructions in properties”...
Page 144: Using The Windvd Status Bar
Exploring Your Options Playing DVDs Using the WinDVD status bar The time slider enables you to rapidly move forward or backward in the DVD content. Move the time slider to the left to move backward or move it to the right to move forward. The current time slot is indicated on the right side of the status bar.
Page 145: Using The Control Panel Playback Buttons
Exploring Your Options Playing DVDs Playlist Exit Bookmarks Time slider Counter Audio volume controls Repeat Eject Directional buttons Help button Properties Expanded controls button Sample WinDVD control panel You can open a shortcut menu by positioning the cursor anywhere in the WinDVD window, other than over the control panel, then clicking the secondary button.
Page 146 Exploring Your Options Playing DVDs Click this To do this Repeat — repeat the current chapter, if the DVD contains chapters. Otherwise this button repeats the DVD from the begin- ning. When the repeat button is activated, the repeat symbol appears to the left of the chapter number on the control panel counter.
Page 147: Maximizing The Video Window
Click this Maximizing the video window To close the WinDVD control panel and expand the video window to fill the screen, click the Maximize button. To display the control panel again, double-click anywhere in the video window. Exploring Your Options To do this Fast reverse —...
Page 148: Using Playlists
Exploring Your Options Using playlists Using playlists TECHNICAL NOTE: The DVD author determines which features the DVD supports. Depending on the DVD format and the computer’s hardware configuration, some of the control panel features may be unavailable when playing a DVD.
Page 149: Loading And Playing Playlists
Click the File button in the lower-right corner of the window, to indicate that you are creating a playlist of individual files. In the Directory list, select the file you want to play first, and click Add to put it at the top of the playlist. DVD files have an .mpg, .vob or .ac3 file name extension.
Page 150: Resuming Normal Playback After Using Playlists
Exploring Your Options Customizing WinDVD Resuming normal playback after using playlists To resume playing the DVD files in order after using a playlist, click the eject button to open the disc tray, then close it again. The DVD resumes normal playback. Customizing WinDVD You can control several general WinDVD characteristics, such as whether the toolbar and status bar are visible, as well as numerous...
Page 151: Setting General Properties
Setting general properties You use the General tab to select the region code, the drive letter assigned to the DVD-ROM drive, the autoplay default option, and which WinDVD toolbars are displayed by default. Region coding is part of the protection system for DVD content. It divides the world into six regions.
Page 152: Setting Audio Properties
Exploring Your Options Customizing WinDVD Tool bar is the bar containing basic player functions that is displayed at the top of the WinDVD video window. Status bar is the bar that is displayed at the bottom of the WinDVD video window. Player is the WinDVD control panel.
Page 153 Properties dialog box with Audio tab on top In the Audio channels box, select the appropriate speaker mode to match your setup as follows: If you have two speakers, select one of the 2 speaker modes. Mono mixes the audio channels into one channel.
Page 154: Setting Display Properties
Exploring Your Options Customizing WinDVD No vocal does not output vocals to any speaker. Left vocal outputs vocals to left speakers only. Right vocal outputs vocals to right speakers only. Both outputs vocals to both left and right speakers. In the Dolby Pro Logic box, select the Always enable check box to enable Dolby Pro Logic.
Page 155: Using Windvd Advanced Features
Select the Lock aspect ratio check box to maintain the original aspect ratio when the video window is resized. Otherwise clear the check box. Select the Startup in full screen mode check box to automatically start WinDVD each time with the video window maximized and the control panel hidden.
Page 156 Exploring Your Options Using WinDVD advanced features WinDVD expanded control panel Use this To do this Directional buttons — use to navigate the WinDVD menus, as you would the arrow keys on the keyboard. The center button represents Enter Numeric keypad — use these buttons to select a chapter by entering the chapter number.
Page 157 Using WinDVD advanced features Use this Menu button — displays all available menus for the current DVD. Examples of menus are: Root, Audio Language, Subtitles. Use your mouse or the control panel directional buttons to select a menu. Click Resume playback.
Page 158 Exploring Your Options Using WinDVD advanced features Use this To do this Subtitles — displays a list of all the available language subtitles. This button is enabled only for DVD content that includes subtitles and supports dynamic subtitle information changes. Select the desired Default language, or select display subtitles in the DVD’s...
Page 159: Zooming In
Zooming in You can zoom in on an area of the WinDVD video window to get a closer look. Click the Zoom button, located in the upper-left corner of the directional button panel. Position the cursor over the top-left corner of the area you want to view in close up.
Page 160: Adjusting The Color Balance
Exploring Your Options Launching an Internet browser from WinDVD Adjusting the color balance You can adjust the DVD color balance. Click the adjustment button on the main DVD video window toolbar to open the Adjustment dialog box. WinDVD Adjustment dialog box The adjustment dialog box provides another set of sliders for adjusting volume and brightness.
Page 161: Chapter 8: Expansion Options
Chapter 7 Expansion Options Your computer is designed to work in the office as well as on the road. This chapter explains how to set up the various optional devices so that your notebook can provide all the convenience of a traditional desktop computer.
Page 162: Connecting External (Optional) Devices
Expansion Options Devices for office computing PC Cards Expansion devices Some are Toshiba devices, others are standard computer components. The devices manufactured by Toshiba can be purchased through Toshiba’s Web site: through the accessories information packaged with your computer. Connecting external (optional) devices You can connect an external PS/2 keyboard or a PS/2 mouse through the PS/2 port on the back of your computer.
Page 163: Using An External Keyboard
Using an external keyboard If you prefer to use a full-size keyboard, you can attach one to your computer. The computer’s PS/2 mouse/keyboard port supports any PS/2-compatible keyboard. CAUTION: Make sure the computer is off before you attach the external keyboard. Connecting an external keyboard with the computer’s power on can damage the external keyboard, the computer, or both.
Page 164: Using A Mouse
Expansion Options Using a mouse Using a mouse If you prefer, you can use a mouse instead of the computer’s built- in pointing device–the AccuPoint II. You can use a PS/2- compatible mouse, a serial mouse or a USB mouse. TECHNICAL NOTE: A serial mouse disables the AccuPoint II.
Page 165 The operating system displays the Control Panel window. Click the Toshiba HWSetup icon. NOTE: The Control Panel window must be set to Classic View to access the Toshiba HWSetup icon. Select the Pointing Devices tab. Under Pointing Devices Options, select one: Auto-selected —...
Page 166: Using A Printer
HINT: When Auto-selected is the default, the computer can’t detect a PS/2 mouse if you connect it after booting the computer. This can be changed in Toshiba Hardware Setup. Click OK. A message appears stating “The changes will take effect next time the machine is rebooted.
Page 167: Connecting A Parallel Printer
CAUTION: Your printer documentation may require you to install the printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly. CAUTION: Never connect the printer cable while the computer’s power is on.
Page 168: Setting Up Your Printer
Expansion Options Using a printer Connect the printer cable to the printer and to the computer’s parallel port. Use the printer cable illustration as a connection guide. To the computer Identifying the ends of a parallel printer cable Plug the printer’s power cable into a live electrical outlet. See your printer documentation for additional configuration steps.
Page 169 Sample Printers and Faxes window Click Add Printer. The Add Printer Wizard appears. Sample Add Printer Wizard dialog box Click Next. Expansion Options Using a printer...
Page 170 Expansion Options Using a printer The Add Printer Wizard asks you to select your printer. TECHNICAL NOTE: If your printer is Plug and Play, the Windows automatically. You can ignore the remainder of this section. See your printer manual. If the printer you are setting up: Is not connected to a network, select Local printer attached to this computer.
Page 171: Using An External Monitor
The default printer, click Yes. Available when specifically requested, click No. Click Next. Click Finish. The Windows page. To complete the setup, click OK. You are now ready to print. Depending on your program, you may see various messages indicating the status of your print job. TECHNICAL NOTE: Some printers require a specific installation process.
Page 172: Connecting The Display Device
(not included with your system). For the best video quality, always use a properly shielded cable. HINT: Toshiba recommends using a cable no longer than 20 feet (approximately 6 meters). Using a poor quality cable may result in a dull or fuzzy picture, poor color, ghosting, video noise, or loss of video.
Page 173: Directing The Display Output When You Turn On The Computer
Connect the other end of the video cable to the television jack on the computer. Connect the external device’s power cable to a live electrical outlet. Turn on the external video device. Set the display mode by pressing Display Properties settings. For more information, see “Directing the display output when you turn on the computer”...
Page 174: Adjusting The Quality Of The External Display
Expansion Options Using an external monitor Press While holding down you want takes effect. This hot key cycles through the settings in order: Built-in display only Built-in display and external monitor simultaneously External monitor only Built-in display and TV (or other external video device) simultaneously (only when in dual controller mode) TV (or other external video device) only Release the...
Page 175: Video Limitations
Using the Wi-Fi Your computer may have an integrated Wi-Fi Mini PCI module. It is recommended that you do not remove the module from your computer. For assistance, contact a Toshiba Wireless Authorized Service Partner. Accessing the Wi-Fi When using your Wi-Fi Mini PCI module, your computer may display a Safely Remove Hardware icon in the desktop’s system...
Page 176: Using An Expansion Device
Expansion Options Using an expansion device Using an expansion device The expansion port allows you to connect your computer to an expansion device, which is an excellent investment if you’re using your computer both in and out of the office. When you return to your desk, you probably want to connect to your network, print reports from your computer, or use a mouse instead of the AccuPoint II.
Page 177: Chapter 9: Toshiba Utilities
Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to determine certain system details, set additional options or change default options. This chapter describes the utilities supplied by Toshiba: Fn-esse Hotkey utility Toshiba Console...
Page 178: Fn-Esse
257. You can assign any key that is not associated with a hot key or a keyboard overlay. Starting Fn-esse Click Start, point to All Programs, Toshiba Utilities, then click Fn-esse. The Fn-esse keyboard appears. ® program without using the Start menu.
Page 179 Click and hold the primary button as you drag the highlighted item from Explorer to the key on the Fn-esse keyboard to which you want to assign it. Toshiba Utilities Fn-esse ® Explorer (or the program...
Page 180: Using The Keyboard Or Pointing Device To Assign Keys
Toshiba Utilities Fn-esse Release the primary button. Fn-esse displays the Add/Edit Command dialog box with the Description, Command Line and Working Directory fields automatically completed. Click OK to close the Add/Edit Command dialog box with your key assignment in place.
Page 181: Viewing Existing Key Assignments
Fn-esse keyboard. Fn-esse displays the Function Key Assignments dialog box. This box lists all the key assignments and the program or document to which each key is assigned. plus the appropriate key from within any ® program. Toshiba Utilities Fn-esse ®...
Page 182: Changing Or Removing Existing Key Assignments
Toshiba Utilities Fn-esse To view items in a popup list, click the Expand popup lists check box. Changing or removing existing key assignments In the Fn-esse keyboard, click the key you wish to change with the secondary button. Fn-esse displays the Assignment Type dialog box.
Page 183: Hotkey Utility
The hotkey utility allows you to receive a confirmation message when you use the hotkey combination for Standby [Fn+F3] or Hibernation [Fn+F4]. To activate: Click Start, All Programs, Toshiba Utilities, then click the Hotkey utility. The Hotkey window appears. Sample Toshiba Hotkey utility window Put a check mark next to the desired option.
Page 184: Toshiba Console
Toshiba Utilities Toshiba Console Toshiba Console The Toshiba Console provides quick access to computer functions and allows you to customize a range of computer settings. To access the control panel: Click Start, then click All Programs. Point to Toshiba Console, then click the resulting Toshiba Console selection.
Page 185: Customizing Your Computer
The features available in this category are: Power Management Mouse Hotkey assignment (for detailed information, see on page Slim SelectBay & Docking Toshiba Hardware Network The features in this category are: IR Utility Security The features available in this category are:...
Page 186: Power Management
The Power Management feature enables you to control your computer’s power usage, regardless of the source, and use the many preset power modes, or create one yourself. To access Power Management through the Toshiba Console, double-click the Power Management icon. The Toshiba Power Saver Properties window appears.
Page 187: Creating A New Power Mode
By changing the options that appear in the Toshiba Power Saver Properties window and clicking OK, you can reconfigure that function. Any options that you change become effective when you click either OK or Apply. Plugged in section This section has a single preset power usage mode You can create other AC power modes, but Toshiba recommends use of the preset Full Power mode.
Page 188: Slim Selectbay ™ And Docking
The Warm Undock service allows you to dock or to remove the computer from the Advanced Port Replicator without turning the computer off. Toshiba Mobile Extensions will provide two selections in the Start menu when the computer is docked to the Advanced Port Replicator.
Page 189: Slim Selectbay ™ Service
Toshiba Hardware Setup Toshiba Hardware Setup is the Toshiba configuration management tool available through Windows. To access it, open the Start menu, click Control Panel, then double-click Toshiba HWSetup. NOTE: The Control Panel window must be set to Classic View to access the Toshiba HWSetup icon.
Page 190 Toshiba Utilities Toshiba Hardware Setup Sample Toshiba HWSetup window The tabs represent various dialog boxes. They are: General—Allows you to view current BIOS, hard disk drive and memory settings Password — Allows you to set the user password and an owner string Device Config —...
Page 191 AC adapter or the battery. By changing any of the options that appear in the dialog boxes and clicking Apply, you can reconfigure that function. Any options that you change will become default settings when you restart your system. Toshiba Utilities Toshiba Hardware Setup...
Page 192: Toshiba Power Saver Utility
Toshiba Utilities Toshiba Power Saver utility Toshiba Power Saver utility Toshiba’s Power Saver utility enhances your computer’s power management capabilities. It controls the computer’s Power Save Mode, which is a series of settings for power management. In the Power Save Properties dialog, you can choose which mode to use, change settings for each mode, or create your own mode.
Page 193: Enabling Hibernation
Enabling Hibernation Your computer includes a Toshiba Power Saver utility that allows you to change many of your default power settings. You can enable hibernation through this utility. To power down the computer using the Hibernation option, click Start, select Turn Off Computer. When you hold down the Shift key, the Standby button changes to Hibernate.
Page 194: Setting User Passwords
Setting a password leaves your computer secure so that nobody can access your files. You must enter the password before you can work on your computer. Toshiba supports the several types of passwords on your computer: An instant password — Secures your open programs and files when leaving the computer temporarily A power-on password —...
Page 195: Setting A User Password
Open the Start menu, click Control Panel, then click Toshiba HWSetup. NOTE: The Control Panel window must be set to Classic View to access the Toshiba HWSetup icon. Select the Password tab. Click Registered. Type your password in the Enter Password box and click OK Type the password again in the Verify Password box and click Click Exit.
Page 196: Disabling A User Password
Open the Start menu, click Control Panel, then click Toshiba HWSetup. NOTE: The Control Panel window must be set to Classic View to access the Toshiba HWSetup icon. Select the Password tab. Click Not Registered. Type your password in the Enter Password box and click OK TECHNICAL NOTE: You have three tries to enter the correct password.
Page 197: Using A Supervisor Password
A supervisor password prevents other users from changing hardware configuration options. Setting a supervisor password Click Start, then click All Programs. Point to Toshiba Console, then click the resulting Toshiba Console selection. The Toshiba Console window appears. Select Security. Sample Toshiba Console Security window Click the Supervisor password icon.
Page 198: Deleting A Supervisor Password
Toshiba Utilities Using a supervisor password Deleting a supervisor password Click Start, then click All Programs. Point to Toshiba Console, then click the resulting Toshiba Console selection. The Toshiba Console window appears. Select Security. Sample Toshiba Console Security window Click the Supervisor password icon.
Page 199: Chapter 10: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
Page 200 If Something Goes Wrong Problems that are easy to fix The Windows Task Manager window appears. Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working.
Page 201: Problems When You Turn On The Computer
Problems when you turn on the computer Add a paragraph break and type some notes describing what you were doing when you received the message. Save the file and refer to it when you contact the software manufacturer. Problems when you turn on the computer These problems may occur when you turn on the power.
Page 202: The Windows® Operating System Is Not Working
If Something Goes Wrong The Windows® operating system is not working The computer displays the The computer was placed in Stand By mode and the battery has discharged. Data stored in the computer’s memory has been lost. To charge the battery, leave the computer plugged into a live wall outlet for several hours.
Page 203: Using Startup Options To Fix Problems
The Windows® operating system is not working Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu. This section describes each option and when to use the procedure.
Page 204: Internet Problems
If Something Goes Wrong The Windows® operating system is not working See your Windows TECHNICAL NOTE: If your computer is connected to a network, the Startup menu may display different versions of Safe mode. Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet.
Page 205: Resolving A Hardware Conflict
Then do one or both of the following: In the search field, type in the topic of the problem with which you need help and follow the on-screen instructions. Click a problem you would like help with from the listings and follow the on-screen instructions.
Page 206: Resolving Hardware Conflicts On Your Own
If Something Goes Wrong Resolving a hardware conflict each device, test it to make sure it and all previously connected devices work. The device most recently connected to the system is the one most likely to be causing a hardware conflict. Resolving hardware conflicts on your own Computer components need resources to accomplish a task.
Page 207: Fixing A Problem With Device Manager
For an older device, remove it from the computer. Disable another system component and use its resources for the new device, see Manager” on page Reconfigure the device so that its requirements do not conflict. Refer to the device’s documentation for instructions about changing settings on the device.
Page 208 If Something Goes Wrong Resolving a hardware conflict Click the icon. You are given the option of disabling the device. Click yes or no, whichever is appropriate. Checking device properties Device Manager provides a way to view the properties of a device. Properties include the name of the manufacturer, the type of device, the drivers installed, and the system resources assigned to the device.
Page 209: Memory Problems
The Resource tab, which lists resources assigned to the monitor, DVD-ROM, DVD-ROM/CD-RW, diskette disk drive, and other power-using functions. The Drivers tab, which displays the drivers being used by the device. Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be device-related.
Page 210 If Something Goes Wrong Resolving a hardware conflict example, a faulty AC adapter or power cable will neither power the computer nor recharge the batteries. Here are some typical problems and how to solve them: The AC power light does not come on when you plug in the AC adapter and power cable.
Page 211: Keyboard Problems
The battery appears not to power the computer for as long as it usually does. If you frequently recharge a partially charged battery, it may not charge fully. Let the battery discharge completely, then try charging it again. Check the power options using the Power Management utility. Have you added a device, such as a PC Card or memory module, that takes its power from the battery? Is your software using the hard disk more? Is the display power set to turn off automatically?
Page 212 If Something Goes Wrong Resolving a hardware conflict The display is blank. Display Auto Off may have gone into effect. Press any key to activate the screen. You may have activated the instant password feature by pressing simultaneously. If you have registered a password, press , type the password and press Enter key registered, press...
Page 213: Disk Drive Problems
The built-in screen flickers. Some flickering is a normal result of the way the screen produces colors. To reduce the amount of flickering, try using fewer colors. To change the number of colors displayed: Point at the desktop and click with the secondary button. Click Properties, and then the Settings tab.
Page 214 If Something Goes Wrong Resolving a hardware conflict a disk problem may cause one or more files to appear to have garbage in them. Typical disk problems are: You are having trouble accessing a disk, or one or more files appear to be missing.
Page 215 this, click Start, then click All Programs, point to Accessories and System Tools, and click Disk Defragmenter. Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software, which is available from your dealer.
Page 216: Dvd-Rom Or Dvd-Rom/Cd-Rw Drive Problems
If Something Goes Wrong Resolving a hardware conflict Error-checking on the faulty diskette (for instructions, see drive problems” on page DVD-ROM or DVD-ROM/CD-RW drive problems You cannot access a disc in the drive. Make sure the drive tray has closed properly. Press gently until it clicks into place.
Page 217 followed by gold-colored CD-ROM. Green-colored CD-ROMs are the least reliable. WinDVD problems: general issues ™ WinDVD has been configured to provide optimum performance and quality based upon your system’s available resources. Changes made to the system or its configuration may impact the playback performance of the WinDVD player.
Page 218 If Something Goes Wrong Resolving a hardware conflict change your operating system, check with your PC manufacturer or your graphics card vendor to ensure that you have the appropriate drivers for both your hardware (for example, the graphics card) and software (drivers must support the operating system and DVD with WinDVD).
Page 219: Minimum System Requirements
WinDVD problems: content issues Movies exhibit poor performance of “Director's Commentary” or other similar optional content versions. Some movies may exhibit poor performance of these features. In particular, the video portion of the movie may become jerky or show pauses. The normal version of the movie will not show this problem.
Page 220 If Something Goes Wrong Resolving a hardware conflict WinDVD: error messages This table offers descriptions and resolutions for error messages that may appear when using WinDVD. Error message and additional information The disc in the DVD-ROM drive is not a valid disc type.
Page 221 Error message and additional information WinDVD cannot display the selected resolution due to system limitations. The screen size exceeds the allowable display limit. There are not enough sys- tem resources to play the DVD at the selected setting. The audio settings are incorrect.
Page 222 If Something Goes Wrong Resolving a hardware conflict Error message and additional information There is a problem with the copy protection system within the DVD-ROM drive. Playback cannot con- tinue. The DVD-ROM drive failed to authenticate (authorize playback of) the DVD disc.
Page 223 Error message and additional information Permission to play is denied. Please check the Parental Control setting. The Parental Control set- ting of WinDVD is lower than the Parental Control level of the content being played. Playback of the DVD disc is not authorized. WinDVD encountered an error.
Page 224: Sound System Problems
If Something Goes Wrong Resolving a hardware conflict Sound system problems You do not hear any sound from the computer. Adjust the volume control. If you are using external headphones or speakers, check that they are securely connected to your computer. The computer emits a loud, high-pitched noise.
Page 225: Resolving Pc Card Problems
Other cards must be set up before you can use them. Use the ® Windows XP PC Card (PCMCIA) Wizard to set up the card. Refer to your Microsoft refer to the documentation that came with the PC Card. Some card manufacturers use special software called enablers to support their cards.
Page 226 If Something Goes Wrong Resolving a hardware conflict The System Properties dialog box appears. Click the Hardware tab. Click the Device Manager button. Double-click the PCMCIA adapter. Double-click the appropriate PC Card. The operating system displays your PC Card’s Properties dialog box, which contains information about your PC Card configuration and status.
Page 227: Printer Problems
The system does not recognize your PC Card. Refer to the PC Card documentation. Removing a malfunctioning card and reinstalling it can correct many problems. A PC Card error occurs. Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure.
Page 228: Modem Problems
If Something Goes Wrong Resolving a hardware conflict Try printing another file. For example, you could create and attempt to print a short test file using Notepad. If a Notepad file prints correctly, the problem may be in your original file. If you cannot resolve the problem, contact the printer’s manufacturer.
Page 229: Develop Good Computing Habits
The modem is on, set up properly and still will not transmit or receive data. Make sure the line has a dial tone. Connect a telephone handset to the line to check this. The other system may be busy or off line. Try making a test transmission to someone else.
Page 230 If Something Goes Wrong Develop good computing habits Read the user’s guides. It’s very difficult to provide a fail-safe set of steps you can follow every time you experience a problem with the computer. Your ability to solve problems will improve as you learn about how the computer and its software work together.
Page 231: If You Need Further Assistance
Consult the dealer from whom you purchased your computer and/or program. Your dealer is your best source for current information. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba If you still need help and suspect that the problem is hardware- related, Toshiba offers a variety of resources to help you.
Page 232: Toshiba Voice Contact
If Something Goes Wrong If you need further assistance Toshiba voice contact Before calling Toshiba, make sure you have: Your computer’s serial number. The computer and any optional devices related to the problem. Backup copies of your operating system and all other preloaded software on diskettes or CD-ROM.
Page 233: Other Toshiba Internet Web Sites
Other Toshiba Internet Web sites toshiba.com computers.toshiba.com toshiba.ca toshiba-Europe.com toshiba.co.jp/index.htm csd.toshiba.com/cgi-bin/tais/ support/supp_home_latin.jsp Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia Belgium Toshiba Information Systems Benelux (Belgium) B.V. Excelsiorlaan 40 B-1930 Zaventem...
Page 234 1147 Budapest Hungary Italy Progetto Elettronica 92 s.r.l. Viale Certosa 138, 20156 Milano Italy Luxembourg Toshiba Information Systems Benelux B.V. Rivium Boulevard 41 2909 LK, Capelle a/d IJssel The Netherlands France Toshiba Systèmes (France) S.A. 7, Rue Ampère 92804 Puteaux Cédex...
Page 235 0901 OSLO 9 Norway Poland TECHMEX S.A. ul. Partyzantów 71, 43-316 Bielsko-Biala 01-059 Warszawa Poland Singapore Toshiba Singapore Pte. Ltd. 438B Alexandra Rd. # 06-01 Alexandra Technopark Singapore 119968 Slovenia Inea d.o.o. Ljubljanska 80 61230 Domzale Slovenia If Something Goes Wrong Toshiba’s worldwide offices...
Page 236 United Kingdom Toshiba Information Systems (U.K) Ltd. Toshiba Court Weybridge Business Park Addlestone Road Weybridge KT15 2UL United Kingdom The Rest of Europe Toshiba Europe (I.E.) GmbH Hammfelddamm 8 D-4-1460 Neuss Germany Switzerland Ozalid AG Herostrasse 7 8048 Zürich Switzerland...
Page 237: Appendix A: Windows ® 98Se Supplemental Information
NOTE: If you upgrade your computer’s operating system to ® Windows and drivers - known as operating system components - from Toshiba’s web site at: pcsuppport.toshiba.com Set up steps Once you turn on the computer, follow the instructions provided by the Setup Wizard on the screen.
Page 238 Personalize your copy of Windows 98 Second Edition by typing your name and company in the appropriate boxes, then click Next. Name your computer. You can either type in a name of your choice or accept the default name that is provided. Assign an Administrator password.
Page 239 Printers panel Double-click Add Printer. The Add Printer Wizard starts. Add Printer Wizard...
Page 240 Click Next. The Add Printer Wizard asks you to select your printer. TECHNICAL NOTE: If your printer is Plug and Play, Windows 98 Second Edition recognizes it automatically. You can ignore the remainder of this section. If the printer you are setting up: Is not connected to a network, select Local printer.
Page 241 If you want this printer to be: The default printer for Windows 98 Second Edition, click Yes. Available when specifically requested, click No. Click Next. Windows 98 Second Edition prompts you to print a test page. If your printer is connected and turned on, click Finish to print a test page.
Page 242 (such as diskettes or Zip disks) if you are transferring them to computers with other operating systems. Power Usage modes in Windows 98SE To access the Toshiba Power Saver utility: Click Start, point to Settings, Control Panel, then double- click the Toshiba Power Saver icon.
Page 243 The preset modes cannot be deleted. Supervisor-level passwords A supervisor-level password protects system settings by restricting who can make changes in Toshiba Utilities. This is useful if more than one person is using the computer. To set the supervisor-level password: Click on Start, then Run.
Page 244 Click on the SVPWTool folder, and then double-click the SVPW32 icon. Click OK. Enter the password information and then click OK. Windows 98 Troubleshooting ® This section explains how to solve problems in instances when ® Windows 98 Second Edition differs from Windows Professional.
Page 245 Close the remaining programs one by one by selecting the program name, then End Task. Click Shut Down. The Shut Down Windows dialog box appears. Select Restart, then click Yes. Your computer shuts down and restarts the Windows Edition operating system. CAUTION: Typing restart your computer is not recommended.
Page 246 Save the file and refer to it when you contact the software manufacturer. You open a program that immediately stops responding. If the CPU Sleep mode is on (enabled), it may stop a program from responding. Close the program you are trying to open and turn off (disable) Sleep mode.
Page 247 The computer starts but, when you press a key on the keyboard or touch the AccuPoint II, nothing happens. Hold down the power button until the computer shuts down. Turn on the computer. If the problem persists, contact Toshiba technical support. The computer is not accessing the hard disk drive.
Page 248 ® The Windows 98 Second Edition operating system is not working Once you are familiar with the desktop and used to the way the ® Windows 98 Second Edition operating system responds to your work routine, you can easily detect if the operating system is not working correctly.
Page 249 Safe mode Step-by-step confirmation Command prompt only Safe mode command prompt only TECHNICAL NOTE: If your computer is connected to a network, the Start up menu may display different versions of Safe mode. Normal Selecting Normal starts the operating system under normal conditions.
Page 250: Safe Mode
Safe mode Selecting Safe mode bypasses basic startup files and starts the operating system, enabling only the mouse, keyboard, and standard VGA display drivers. Running Safe mode allows you to undo any changes you made to the system configuration that may have caused the Windows Second Edition operating system or a device to fail.
Page 251 the computer. Although your computer does not need the Config.Sys and Autoexec.Bat files to start, it does process these files to support backward compatibility with some programs and device drivers. The same holds true for the System.ini and Win.ini files. TECHNICAL NOTE: Programs and devices that are backward compatible are designed to work with older operating systems and other programs.
Page 252 The Windows start even in Safe mode You want to run MS-DOS changes to your startup files You want to avoid loading Himem.sys (extended memory manager) or Ifshlp.sys (file system manager) The Windows can help you If the Windows properly, but you still have a problem using your computer, the online Help can assist you in troubleshooting the problem.
Page 253 Resolving a hardware conflict This section contains information where Windows Edition differs from Windows not find a solution to your hardware problem in this section, refer “If Something Goes Wrong” on page If you receive an error message telling you there is a device driver conflict or a general hardware problem, try using Windows Second Edition Help to troubleshoot the problem first.
Page 254: Checking Device Properties
direct channel to the computer’s memory to store information is it works. These channels of communication are commonly known as system resources. For more information on system resources, refer to “If Something Goes Wrong” on page Disabling a device in the Windows Edition operating system Click the My Computer icon with the secondary button, then click Properties.
Page 255 The Device Properties dialog box appears, which provides various tabs from which to choose. Some common ones are: The General tab, which provides basic information about the device. The Resources tab, which lists the resources assigned to the device. If you have a device conflict, it is shown in the Conflicting device list.
Page 256 Slow playback performance. DVD playback is a resource intensive application. Other applications and/or changes to your system hardware, software or configuration can impact playback performance. If playback is slower than normal: Close any other open applications to improve the performance of the DVD playback.
Page 257: Appendix B: Hot Keys
Appendix B Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 258: Instant Password Security
Hot Keys Instant password security Instant password security This hot key blanks the display. Without a password The Fn + F1 key combination turns off the display and activates instant security. Using the mouse or any key will make the display reappear.
Page 259: Power Usage Mode
Sample power usage modes ® The power usage mode in the Windows operating system under AC power is Full Power only. The properties of each mode are set in the Toshiba Power Management utility. For more information, see “Mobile Computing” on page 113.
Page 260: Stand By Mode
Hot Keys Stand By mode Stand By mode This hot key puts the computer into Stand By mode. A message box is displayed by default to confirm that the computer is going into Stand By mode. This message box can be set so it doesn’t display. Sample Stand By confirmation box For more information about Stand By mode, please see “Using Standby”...
Page 261: Display Modes
Display modes This hot key cycles through the power-on display options. The display modes are: Sample display options window In o resolution of the internal display panel to match the resolution of the external display device. Display brightness This hot key decreases the screen brightness. This hot key increases the screen brightness.
Page 262: Keyboard Hot Keys
Hot Keys Keyboard hot keys Keyboard hot keys This hot key turns the cursor control overlay on and off. This hot key turns the numeric overlay on and off. This hot key turns the scroll lock feature on and off.
Page 263: Appendix C: Power Cable Connectors
Appendix C Power Cable Connectors The computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved United Kingdom...
Page 264 — Blank Page —-...
Page 265: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms These acronyms may appear in this user’s guide. alternating current BIOS basic input/output system bits per second compact disc CD-ROM compact disc read-only memory CD-RW compact disc rewrite memory CMOS...
Page 266 Glossary DIMM DSTN DVD-ROM digital versatile (or video) disc read-only memory EPROM HTML IEEE LPT1 MIDI PCMCIA direct current direct memory access dual inline memory module disk operating system dots per inch dual supertwist nematic digital versatile (or video) disc enhanced capabilities port erasable programmable read-only memory file allocation table...
Page 267 SCSI DDRAM SRAM SVGA Terms These terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 268 Glossary alternating current (AC) — The type of power usually supplied to residential and commercial wall outlets. AC reverses its direction at regular intervals. Compare direct current (DC). application — A computer program that you use to perform tasks of a specific type.
Page 269 bus — An electrical circuit that connects the central processing unit (CPU) with other parts of the computer, such as the video adapter, disk drives, and ports. It is the pathway through which data flows from one device to another. See also bus speed, frontside bus. bus speed —...
Page 270 Glossary compatibility — The extent to which computers, programs, or devices can work together harmoniously, using the same commands, formats, or language as another. configuration — (1) The collection of components that make up a single computer system. (2) How parts of the system are set up (that is, configured).
Page 271 directory — See folder. disable — To turn a computer option off. See also enable. disc — A round, flat piece of metal, designed to be read from and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs.
Page 272 Glossary DVD — An individual digital versatile (or video) disc. See also DVD- ROM. DVD-ROM (digital versatile [or video] disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs. Compare CD-ROM.
Page 273 folder — Also called directory. A container for organizing files saved to a disk. A folder is symbolized on screen by a graphical image (icon) of a file folder. A folder can contain files and other folders. format — (verb) To prepare a blank disk for use with the computer’s operating system.
Page 274 Glossary Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 275 L1 (level one) cache — Memory cache built into the processor to help improve processing speed. See also cache, CPU cache, L2 cache. L2 (level two) cache — Memory cache installed on the motherboard to help improve processing speed. It is slower than L1 cache and faster than main memory.
Page 276 Glossary MIDI (Musical Instrument Digital Interface) — A standard for connecting musical instruments, synthesizers, and computers. The MIDI standard provides a way of translating music into a form computers can use, and vice versa. modem — Short for “modulator/demodulator.” A device that converts information from digital to analog and back to digital, enabling information to pass back and forth between digital computers and analog telephone lines.
Page 277 operating system — A set of programs that controls how the computer works. Examples of operating systems are Windows Edition and Windows palette — See color palette. parallel — Processes that occur simultaneously. In communications, it means the transmission of more than one bit of information at a time.
Page 278 Glossary properties — The attributes of an object or device. For example, the properties of a file include the file’s type, size, and creation date. RAM (random access memory) — Volatile memory that can be written to as well as read. By volatile, we mean that information in RAM is lost when you turn off your computer.
Page 279 serial — Processes that occur one at a time. In communications, it means the transmission of one bit at a time sequentially over a single channel. On your computer, the serial port provides a serial interface between the computer and an appropriate device. Compare parallel. shortcut —...
Page 280 Web — See World Wide Web. Wi-Fi — A trademarked term by the Wireless Capability Ethernet Alliance which stands for Wireless Fidelity. Wi-Fi is another term for the IEEE 2.11b communication protocol to permit an Ethernet connection using wireless communication components. World Wide Web (www) —...
Page 281: Index
Index Numerics 101-key keyboard 83 AC adapter 46 DC IN socket 29 plugging in 29 AC power cable connectors 263 AC power light 36 accessories carrying cases 101 devices 72 docking solutions 66 memory 67 AccuPoint II 61 AccuPoint II pointing device 36 adapter, AC 29 Add Printer Wizard 168 adjusting recording quality 140...
Page 282 Index battery life maximizing 121 battery lock 33 battery module 33 battery power displaying remaining 115 monitoring 115 running the computer on 114 battery, light 37 button internet 51 power 35 start 127 button, scroll 51 buttons CD or DVD controls 138 CD Player 138 creating 139 playing an audio 138...
Page 283 device expansion 66 Device Manager 207 checking properties 208 disabling a device 207 device, serial 30 devices keyboard 59 memory module 67 mouse 61 dialog box Shut Down Windows 241 DirectX Foundation 219 disconnection modem 6 Disk Defragmenter 215 disk drive corrupted/damaged data files 215 missing files/trouble accessing a disk 214...
Page 284 Index exposure to radio frequency radiation 9 external mouse 61 external device connecting 162 external diskette drive connecting 64 external display adjusting 175 external display, adjusting 58 external monitor not working 213 using 171 external speakers 65 CPU 29 FAT (File Allocation Table) 214 fax branding 6 FCC Notice “Declaration of Conformity Information”...
Page 285 warning 25 icons Windows XP Professional desktop 126 icons, safety 24 indicator panel keyboard 36 system 36 indicator panel lights 36 Industry Canada (IC) compliance to RSS 210 8 Industry Canada requirement 4 infrared port 28 Installation 5 installation memory module 68 modem 5 installing memory modules 67...
Page 286 Index left side 31 light AC power 36 cursor control 37 hard disk drive 37 main battery 37 numlock 38 on/off 36 SelectBay indicator 37 light, wireless indicator 37 lighting 42 lights, indicator panel 36 lock battery 33 PC Card 32 lock cable, PORT-Noteworthy computer 31 main battery light 37...
Page 287 parallel port 30 parallel printer connecting 162 password deleting a supervisor 198 disabling a user 196 supervisor set up 197 passwords instant, using 194 setting user 194 Windows 98SE 243 PC Card checklist 225 CIS (Card Information Structure) computer stops working 226 configuring 78 errors 227 hot swapping 98...
Page 288 216 computer hangs when PC Card inserted 226 computer will not power up 201 contacting Toshiba 231 corrupted/damaged data files 215 Device Manager 207 disabling a device 207 disk drive is slow 214 display is blank 212...
Page 289 system resources 206 trouble prevention 229 URL address not found 204 using Startup options 203 warning resume failure 202 Windows won’t start 201 Windows XP not working 202 WinDVD error messages 220 program, starting 87 programs not running correctly 215 projector 55 connecting 57 protection of stored data 2...
Page 290 Toshiba Accessories information 26 Toshiba Console 184 Toshiba Forum 231 Toshiba Hardware Setup 189 Toshiba online resources 112 Toshiba online services 231 Toshiba Power Saver utility 192 Toshiba utilities 177 trademarks 13 transferring files 128 transferring information between computers 128 troubleshooting...
Page 291 92 using the AccuPoint II pointing device utilities Power Management 186 Toshiba Power Extensions 193 utility Toshiba Power Saver 192 video cables 56 video display device connecting 56 video limitations 58 video projector adjusting display 58...
Page 292 Index wireless interoperability 7 wireless LAN your health 8 wireless networking 131 wizard Add Printer 238 Wizards Dial-Up Networking Wizard 131 work habits 43 Y-cable 165...

This manual is also suitable for:

Te2300 series

Toshiba TE2000 User Manual

Chapter 1: Introduction

Chapter 2: Finding Your Way Around

Chapter 3: Getting Started

Chapter 4: Connecting Other External Devices

Chapter 5: Learning the Basics

Chapter 6: Mobile Computing

Chapter 7: Exploring Your Options

Chapter 8: Expansion Options

Chapter 9: Toshiba Utilities

Chapter 10: If Something Goes Wrong

Appendix A: Windows ® 98SE Supplemental Information

Appendix B: Hot Keys

Appendix C: Power Cable Connectors

Quick Links

Related Manuals for Toshiba TE2000

Summary of Contents for Toshiba TE2000