Table of Contents
Advertisement
Try printing another file. For example, you could create and
attempt to print a short test file using Notepad. If a Notepad file
prints correctly, the problem may be in your original file.
If you cannot resolve the problem, contact the printer's
manufacturer.
The printer will not print what you see on the screen.
Many programs display information on the screen differently from
the way they print it. See if your program has a print preview
mode. This mode lets you see your work exactly as it will print.
Contact the software manufacturer for more information.
Modem problems
This section lists common modem problems:
The modem will not receive or transmit properly.
Make sure the cable from the modem to the telephone line is
firmly connected to the computer's modem port and the telephone
line jack.
Check the port settings to make sure the hardware and software
are referring to the same COM port. See
port" on page
Check the communications parameters (baud rate, parity, data
length and stop bits) specified in the communications program. It
should be set up to transmit at 300, 1200, 2400, 4800, 9600,
14400, 28800, 33600 bps (bits per second) or higher. Refer to the
program's documentation and the modem manual for information
on how to change these settings.
The modem is on, set up properly and still will not transmit
or receive data.
Make sure the line has a dial tone. Connect a telephone handset to
the line to check this.
If Something Goes Wrong
Resolving a hardware conflict
135.
"Determining the COM
207
Advertisement
Table of Contents
