Page 1
Ceramic hob ZKT 641 H Installation and Operating Instructions...
Page 2
Dear Customer, Please read these user instructions carefully and keep them to refer to later. Please pass the user instructions on to any future owner of the appliance. The following symbols are used in the text: Safety instructions Warning! Notes that concern your personal safety.
Operating Instructions Safety instructions Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty. This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Direc- tive – 89/336/EEC dated 03.05.1989 EMC Directive in- clusive of Amending Directive 92/31/EEC –...
Description of the Appliance Cooking surface layout Single cooking zone 1200W Single ring cooking zone Halogen 2400W Control panel layout Lock with pilot light On/Off with power indicator Control panel Heat setting selection Timer display Timer Display Double ring cooking zone 700/1700W Single cooking zone 1200W...
Touch Control sensor fields The appliance is operated using Touch Control sen- sor fields. Functions are controlled by touching sen- sor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields. Sensor field On / Off Increase settings...
Operating the appliance Switching the appliance on and off Control panel Switch on Touch Switch off Touch After switching on, within approx. 10 seconds a heat setting or a function must be set, other- Halogen cooking zone With halogen cooking zones full heat is reached immediately.
Using the automatic warm-up function All cooking zones are equpped with an automatic warm up function When setting a heat setting using ¾ , when starting from , the cooking zone switches to full power for a certain amount of time and then automatically switches back to the heat setting set.
Using the child safety device The child safety device prevents unintentional use of the appliance. Setting the child safety device Step Switch on the appliance (Do not set a heat setting) Touch until the signal sounds Touch Appliance switches off. The child safety device is engaged. Releasing the child safety device Step Switch on the appliance...
Using the timer Function Automatic cut-out Countdown timer While the countdown timer is activated, no cooking zone can be used. The countdown timer basically cannot be used if a cooking zone is switched on. If a cooking zone is switched off, the timer function set is also switched off.
Setting the time Step Control panel Select cooking zone Touch After a few seconds the pilot light flashes more slowly. The time is set. The time counts down. Switching off the timer function Step Control panel Select cooking zone Touch The pilot light goes out.
Safety cut-out Cooking surface • If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off. • If one or more sensor fields are covered for longer than approx.
Tips on cooking and frying Information about acrylamides According to the latest scientific research, in- tensive browning of food, especially in prod- ucts containing starch, may present a health risk due to acrylamide. Therefore we recom- mend cooking at low temperatures and not browning foods too much.
Examples of cooking applications The information given in the following table is for guidance only. Heat Cooking setting process Keeping Keeping cooked foods warm food warm Melting melting butter, chocolate, gelatine Solidifying Fluffy omelettes, baked eggs Simmering rice and milk-based Simmering Heating up ready-cooked meals Steaming...
Cleaning and care Take care! Risk of burns from residual heat. Let the appliance cool down. Important Sharp objects and abrasive clean- ing materials will damage the appliance. Clean with water and washing up liquid. Important Residues from cleaning agents will damage the appliance.
What to do if … Problem The cooking zones will not switch on or are not functioning The residual heat indicator is not displaying anything The automatic warm up function is not switching itself on Acoustic signal sounds and appli- ance switches itself on and then off again;...
If you are unable to remedy the problem by fol- lowing the above suggestions, please contact your local Service Force Centre. Warning! Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from improper repairs.
Installation Instructions Safety instructions The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.) Installation may only be carried out by a qualified electrician.
Installation proud of the work surface • Clean the worktop in the area of the cut-out sec- tion. • Stick the one-sided self-adhesive sealing tape supplied all the way round the lower edge of the cooking surface along the outer edge of the glass ceramic panel.
Warranty conditions Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of the purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at...
Customer Care For general enquiries concerning your Zanussi appli- ance, or for further information on Zanussi products please contact our Customer Care Department by letter or telephone at the address below or visit our website at www.zanussi.co.uk..
Page 28
822 925 198-A-251104-01 Subject to change without notice The Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.