Cisco IR1101 Manual page 24
Hide thumbs
Also See for IR1101:
- Hardware installation manual (86 pages) ,
- User manual (26 pages) ,
- Getting started (20 pages)
Advertisement
Installing the DSL SFP Module
Indicator LED
LED 2 (Green)
xDSL Status LED
Installing the DSL SFP Module
Perform the following to install the module:
Step 1
Close the SFP-Pull before inserting the SFP module.
Step 2
Line up the SFP module and slide it into the cage.
Figure 18: Align SFP Module
LED 1 will turn orange as an indicator of RT. Check for physical connection. You should see LED 2 flashing green
slowly as soon as you insert the device.
Step 3
Plug in the xDSL connection cable. This is only available for an RJ-45 connector.
Figure 19: xDSL Connection
Check for physical connection. You should see LED 2 flashing green slowly as soon as you insert the cable.
Product Overview
24
State
Extremely Rapid Flash
Product Overview
Description
Packet Transmit
Advertisement
