Cisco IR1101 Manual page 19
Hide thumbs
Also See for IR1101:
- Hardware installation manual (86 pages) ,
- User manual (26 pages) ,
- Getting started (20 pages)
Advertisement
Product Overview
Table 11: Supported Gigabit SFPs
GE SFP
Distance
GLC-SX-MM-RGD
220-550 m
GLC-LX-SM-RGD
550m/10 km
GLC-ZX-SM-RGD
70 km
SFP-GE-S
220-550 m
SFP-GE-L
550 m/10 km
SFP-GE-Z
70 km
Table 12: Supported FE SFPs
FE SFP
Distance
GLC-FE-100FX-RGD
2 km
GLC-FE-100LX-RGD
10 km
For the most up-to-date list of supported SFP models for Cisco Industrial Ethernet switches, see
http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html#wp138176
DSL SFP Module
This section provides an example of installing and removing the DSL SFP module.
Attention
Prior to installing the DSL SFP Module, please note the following statements:
1. Follow all of warning notices and instructions marked on the product or in the user manual.
2. Do not install telephone wiring during a lightning storm.
3. The device should be installed by a service/skilled person on stationary pluggable equipment and connected
to a socked-outlet with a protective earthing conductor to building earth.
4. External paired conductor cable should be minimum wire diameter of 0.4 mm, shall have the current
limited to 1.3 A.
5. Please disconnect RJ45/RJ11 line before disconnect the power supply.
The following photo shows the DSL SFP Module:
Fiber
MMF
MMF/SMF
SMF
MMF
MMF/SMF
SMF
Fiber
Commercial
Extended
0C ~ +70C
-5C ~
+85C
MMF
SMF
Commercial
Extended
0C to +70C
-5C to
+85C
YES
YES
YES
Industrial
DOM
-40C ~
+85C
YES
YES
DSL SFP Module
Industrial
DOM
-40C to
+85C
YES
YES
YES
YES
YES
YES
YES
Product Overview
19
Advertisement
