hit counter script

Configuring Profibus Dp; General Information About Communication Via Profibus Dp - Siemens SIMOTION D4x5-2 Commissioning And Hardware Installation Manual

Hide thumbs Also See for SIMOTION D4x5-2:
Table of Contents

Advertisement

Parameter assignment / addressing

6.3 Configuring PROFIBUS DP

6.3
Configuring PROFIBUS DP
6.3.1

General information about communication via PROFIBUS DP

Definition of PROFIBUS DP
PROFIBUS DP is an international, open field bus standard specified in the European field bus
Standard EN 50170 Part 2. PROFIBUS DP is optimized for high-speed, time-sensitive data
transfer at field level.
Components communicating by means of PROFIBUS DP are classified as master or slave
components.
● Master (active bus node):
Components that represent a master on the bus define data transfer along the bus, and
are therefore known as active bus nodes.
Masters components are divided into two classes:
– DP master class 1 (DPMC1):
– DP master class 2 (DPMC2):
● Slaves (passive bus nodes):
These devices may only receive, acknowledge and transfer messages to a master when
so requested.
Examples: SINAMICS drives, I/O modules
Functions on PROFIBUS DP
The functional scope can differ between DP masters and DP slaves. The functional scope is
different for DP-V0, DP-V1 and DP-V2.
These functions on the PROFIBUS DP are characterized by:
● Configurable, equidistant, isochronous PROFIBUS DP cycle
● Synchronization of slaves by the master by means of a global control message frame in
each cycle clock
● Independent maintenance of the isochronous cycle clock by the slaves in the event of a
short-term communication failure.
Additional references
You will find additional information about PROFIBUS DP in the
System Manual.
132
Central master devices are thus designated, which exchange information with the slaves
in specified message cycles.
Examples: SIMOTION D445‑2 DP/PN, C240, P350, SIMATIC S7, etc.
These are devices for configuration, commissioning, and operator control and
monitoring while the bus is in operation.
Examples: Programming devices, operator control/monitoring devices
Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B
SIMOTION Communication
SIMOTION D4x5-2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simotion cx32-2Simotion cbe30-2Simotion tb30

Table of Contents