Installing Updates For The Home Connect Software; Information On Data Protection; Declaration Of Conformity - Siemens KF 86N Series Installation Instructions And Instructions For Use
Hide thumbs
Also See for KF 86N Series:
Table of Contents
Advertisement
Home Connect
en
Resetting Home Connect settings
If there is a problem when trying to establish a
connection or if you would like to register the appliance
in a different home network (WLAN), the Home
Connect settings can be reset:
Press settings button.
1.
The |connect button lights up.The cool-fresh
compartment temperature display shows Cn.
Keep pressing N/M button cool-fresh compartment
2.
until the cool-fresh compartment temperature display
shows rE and the freezer compartment temperature
display shows OF.
Press N button freezer compartment.
3.
The freezer compartment temperature display shows
an animation for 15 seconds.
The freezer compartment temperature display then
shows OF.
The Home Connect settings have been reset.
Installing updates for the Home
Connect software
The refrigerator checks at regular intervals whether
updates are available for the Home Connect software.
If an update is available, the temperature display
shows UP:
Confirm update in Home Connect app.
■
Do not switch the refrigerator off during updates.
The freezer compartment temperature display shows
an animation. The update is installed.
All buttons are locked during installation.
Note:
If installation was successfully completed, the freezer
■
compartment temperature display will show On.
If installation was not successfully completed, the
■
freezer compartment temperature display will
show Er.
Start the update again at a later time.
If installation cannot be completed even after
multiple attempts, notify Customer Service.
Press any button to reset the display to the set
temperature.
20
Information on data protection
The first time your Home Connect appliance is
registered on the WLAN network connected to the
Internet, your appliance will transmit the following types
of data to the Home Connect server (initial registration):
Unique appliance identification (consisting of
■
appliance codes as well as the MAC address of the
installed Wi-Fi communication module).
Security certificate of the Wi-Fi communication
■
module (to ensure a secure data connection).
The current software and hardware version of your
■
home appliance.
Status of any previous resetting to factory settings.
■
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use these Home Connect functions for the first time.
Please note that the Home Connect functions can
Note:
only be utilised with the Home Connect app. Information
on data protection can be called up in the Home
Connect app.
Declaration of Conformity
BSH Hausgeräte GmbH hereby declares that the
appliance with Home Connect functionality meets the
essential requirements and the other relevant provisions
of the Directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found
online at http://www.siemens-home.bsh-group.com
among the additional documents on the product page
for your appliance.
2.4 GHz band: 100 mW max.
5 GHz band: 100 mW max.
BE
BG
CZ
ES
FR
HR
y
HU
MT
NL
SK
FI
SE
5 GHz WLAN: for indoor use only
DK
DE
EE
IE
IT
CY
LV
LT
AT
PL
PT
RO
UK
NO
CH
TR
EL
LU
SI
Advertisement
Table of Contents
