Cisco 7920 Administration Manual page 123
Wireless ip phone
Hide thumbs
Also See for 7920:
- Administration manual (238 pages) ,
- User manual (144 pages) ,
- Phone manual (98 pages)
Table of Contents
Advertisement
Chapter 5
Configuring Network Settings on the Cisco Wireless IP Phone 7920
Step 6
Step 7
Assigning a Primary Gateway
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Assigning a Primary TFTP Server
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Enter or modify the IP address.
For information about entering values, see the
the Network Configuration Menu" section on page
Press Back to return to the Static Settings options.
If you manually assign an IP address to the Cisco Wireless IP Phone 7920, you
must indicate the primary gateway to be used. The gateway provides connectivity
to the IP network beyond the subnet to which the phone belongs.
Before you can assign a primary gateway, you must disable DHCP. For
instructions, see the
"Disabling DHCP" section on page
Procedure
Press the Menu softkey.
Choose Network Config > DHCP Enable/Disable > Disable
Scroll to Static Settings and press Select.
The Static Settings menu options display.
Scroll to Primary Gateway and press Select.
Press the Edit softkey.
Enter or modify the IP address.
For information about entering values, see the
the Network Configuration Menu" section on page
Press Back to return to the Static Settings options.
The TFTP Server indicates the primary Trivial File Transfer Protocol (TFTP)
server used by the phone to obtain configuration files. If you have disabled DHCP,
then you must assign a primary TFTP server.
Verifying or Entering Network Settings
"Guidelines for Editing Settings in
5-3.
5-8.
"Guidelines for Editing Settings in
5-3.
5-11
Advertisement
Table of Contents
Troubleshooting
