Appendix; Updating Firmware For The Cisco Wireless Ip Phone 7920; Installing The New Firmware Image With Cisco Callmanager 3.3(3) Service Release 1 And Later - Cisco 7920 Administration Manual
Wireless ip phone
Hide thumbs
Also See for 7920:
- Administration manual (238 pages) ,
- User manual (144 pages) ,
- Phone manual (98 pages)
Table of Contents
Advertisement
Installing the New Firmware Image with
Cisco CallManager 3.3(3) Service Release 1 and
Later
Note
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Updating Firmware for the
Cisco Wireless IP Phone 7920
This section provides the following information about updating firmware for the
Cisco Wireless IP Phone 7920.
Installing the New Firmware Image with Cisco CallManager 3.3(3) Service
•
Release 1 and Later, page C-1
•
Upgrading Firmware for the Cisco Wireless IP Phone 7920 with
Cisco CallManager Express 3.0, page C-3
Use this procedure to load the latest version firmware image for the
Cisco Wireless IP Phone 7920 on Cisco CallManager 3.3(3) SR1 and later. You
must install the firmware image on all Cisco CallManager servers that run TFTP
service.
If you are using Cisco CallManager Release 3.3(2) and earlier, you must also use
the phone load image helper file OS7920.txt. The 7920 device type is not
supported in earlier releases of Cisco CallManager.
A P P E N D I X
C
C-1
Advertisement
Table of Contents
Troubleshooting
