Entering or Verifying Wireless Settings
Entering or Verifying Wireless Settings
Table 6-1
Wireless Network Settings
Network Setting
Service Set Identifier
(SSID)
Authentication
Encryption
Wired Equivalent
Privacy (WEP) Key
Light Extensible
Authentication Protocol
(LEAP)
Associated AP MAC
Address
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
6-4
Chapter 6
Configuring the Wireless Network Settings on the Cisco Wireless IP Phone 7920
The Wireless submenu contains settings that the phone uses to authenticate with
an access point. These settings include the SSIDs, authentication and encryption
data that the phone uses.
On Cisco Wireless IP Phone 7920, you can view detailed information about the
current network settings of the phone. You can use this information to
troubleshoot problems or to change settings. The 802.11b Configuration menu
provides access to the wireless network settings that are described in
Description
Unique identifier for accessing wireless
access points.
The type of security used to validate that
phone requests to the AP are authorized.
Three options are:
Open—Open access to APs
•
Shared Key—Authentication on the AP
•
LEAP—Authentication using a RADIUS
•
server
An encryption scheme for securing wireless
communications by using an encryption key.
Cisco proprietary authentication and
encryption method for securing wireless
communications using a RADIUS server
MAC address for the access point to which the
phone is currently associated.
Table
Usage Notes
"Setting Up the Service Set
Identifier (SSID)" section
on page 6-5
"Selecting the
Authentication Type"
section on page 6-6
"Setting Up the Wired
Equivalent Privacy Keys"
section on page 6-7
"Setting the Cisco Light
Extensible Authentication
Protocol (LEAP)" section
on page 6-12
"Viewing the Associated
Access Point MAC
Address" section on
page 6-10
OL-3930-02
6-1.