Table of Contents
Advertisement
Description
3.1
Area of application
The synchronous machines of this series are used as industrial drives for textile machines. They
are designed for converter operation.
Do not connect these SIMOTICS A machines directly to the line supply.
These machines are characterized by their high power density, ruggedness, long lifetime and
overall reliability.
3.1.1
Correct and intended use
Correct and intended use of the machines
These machines are intended for industrial installations. They comply with the harmonized
standards of the series EN / IEC 60034 (VDE 0530). It is absolutely prohibited that these
machines are used in hazardous zones. If other/more wide-ranging demands (e.g. protection so
that they cannot be touched by children) are made in special cases – i.e. use in non-industrial
installations – these conditions must be ensured by the customer.
Note
Machine directive
Low-voltage motors are components designed for installation in machines in accordance with
the current Machinery Directive. Commissioning is prohibited until it has been absolutely
identified that the end product is in conformance with this Directive. Comply with standard EN /
IEC 60204-1.
Risk of explosion
This machine is not designed for use in hazardous areas. An explosion can occur if the machine
is operated in these areas. This can result in death, serious injury or material damage.
• Never operate this machine in hazardous areas.
3.1.2
CE marking
Use of machines without CE marking
1FU9
Operating Instructions, 07/2020, A5E46712792A
WARNING
3
19
Advertisement
Table of Contents
