Cisco NCS 1004 Command Reference Manual page 16
Hide thumbs
Also See for NCS 1004:
- Hardware installation manual (70 pages) ,
- Manual (52 pages) ,
- Quick start manual (6 pages)
Table of Contents
Advertisement
controller coherentDSP
None
Command Default
Coherent DSP controller configuration
Command Modes
Command History
Release
Release
7.0.1
Release
7.1.1
Example
The following is a sample in which performance monitoring parameters of Coherent DSP controller
is configured in 30 second intervals.
RP/0/RP0/CPU0:ios#configure
RP/0/RP0/CPU0:ios(config)#controller coherentDSP 0/0/1/1 pm 30-sec fec threshold post-fec-ber
max OE-15
RP/0/RP0/CPU0:ios(config)#commit
The following example shows how to configure TTI on a coherentDSP controller with the sent and
expected strings set to the same ASCII string. The state of the controller is up.
RP/0/RP0/CPU0:ios#configure
RP/0/RP0/CPU0:ios(config)#controller coherentDSP 0/1/0/1 tti sent ascii 1234
RP/0/RP0/CPU0:ios(config)#controller coherentDSP 0/1/0/1 tti expected ascii 1234
RP/0/RP0/CPU0:ios(config)#commit
The following example shows how to configure TTI on a coherentDSP controller with the sent and
expected strings set to different ASCII strings. The state of the controller goes down and the
OTUK-TIM alarm is raised.
RP/0/RP0/CPU0:ios#configure
RP/0/RP0/CPU0:ios(config)#controller coherentDSP 0/1/0/1 tti sent ascii 1234
RP/0/RP0/CPU0:ios(config)#controller coherentDSP 0/1/0/1 tti expected ascii 5678
RP/0/RP0/CPU0:ios(config)#commit
The following is a sample to enable the GCC0 interface.
RP/0/RP0/CPU0:ios#configure
RP/0/RP0/CPU0:ios(config)#controller CoherentDSP0/0/0/0
RP/0/RP0/CPU0:ios(config-CoDSP)#gcc0
RP/0/RP0/CPU0:ios(config-CoDSP)#commit
RP/0/RP0/CPU0:ios(config-CoDSP)#exit
Command Reference for Cisco NCS 1004
10
Modification
This command was introduced.
gcc0 keyword was added.
Commands
- Quick Links:
- Controller Optics
Hide quick links:
Advertisement
Table of Contents
