Table of Contents
Advertisement
4.4
FO-Connections
The receiving optical connectors are marked with R1/2, the transmitting
connections with T1/2 (see Fig. 2).
ATTENTION! Please tight the mechanical screw connections of the FO -
cables with FSMA plug carefully and only by hand (do not use tools).
The ST plugs are to be shifted with the lateral nose into the groove of the
device connection and locked afterwards. During the installation of the
FO - cables the bending radius specified for the cable is to be kept.
4.5
Switch positions
The DIP switches can be actuated from outside.
Down view
Fig. 3: Switch positions S1, S2
Page 20 of 28
X6
ON
OFF
S1
ON
OFF
S2
RS485-FO Converter 1-channel
X5
X7
X2
12.10.2006
Advertisement
Table of Contents
