Related Manuals for Siemens RUGGEDCOM RMC
Summary of Contents for Siemens RUGGEDCOM RMC
- Page 1 Preface Introduction Installing the Device RUGGEDCOM RMC Communication Ports Technical Specifications Dimension Drawings Installation Guide Certification 6/2014 RC1006-EN-02...
- Page 2 Warranty Siemens warrants this product for a period of five (5) years from the date of purchase, conditional upon the return to factory for maintenance during the warranty term. This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void.
-
Page 3: Table Of Contents
RUGGEDCOM RMC Installation Guide Table of Contents Table of Contents Preface ........................ Alerts ..............................v Accessing Documentation ........................v Training .............................. vi Customer Support ..........................vi Chapter 1 Introduction ......................1.1 Feature Highlights ........................1 1.2 Ports, Controls and Indicator LEDs ....................2 Chapter 2 Installing the Device .................... - Page 4 RUGGEDCOM RMC Table of Contents Installation Guide Chapter 5 Dimension Drawings ..................Chapter 6 Certification ......................6.1 Agency Approvals ........................19 6.2 FCC Compliance ........................19 6.3 Industry Canada Compliance ...................... 19 6.4 EMI and Environmental Type Tests ..................... 20...
-
Page 5: Preface
Installation Guide Preface Preface This guide describes the RUGGEDCOM RMC. It describes the major features of the device, installation, commissioning and important technical specifications. It is intended for use by network technical support personnel who are responsible for the installation, commissioning and maintenance of the device. -
Page 6: Training
Siemens sales representative. Customer Support Customer support is available 24 hours, 7 days a week for all Siemens customers. For technical support or general information, please contact Siemens Customer Support through any of the following methods: • Online Visit http://www.siemens.com/automation/support-request... -
Page 7: Introduction
Introduction Introduction The RUGGEDCOM RMC is an industrially hardened fiber optical media converter specifically designed to operate in harsh environments such as those found in electric utility substations and factory floors. The RMC provides industrial strength Ethernet copper-to-fiber media conversion allowing for 10Base-T to 10Base-FL and 100Base-TX to 100Base-FX over SingleMode or MultiMode fiber optics. -
Page 8: Ports, Controls And Indicator Leds
Chapter 1 RUGGEDCOM RMC Introduction Installation Guide Universal Power Supply Options • 24VDC, 48VDC or HI (88-300VDC / 85 - 264VAC) options for worldwide operability • Integrated high-reliability power supply eliminates the need for external power transformer • Screw down terminal blocks ensure reliable maintenance-free connections •... -
Page 9: Installing The Device
This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void. Changes or modifications not expressly approved by Siemens Canada Ltd. could invalidate specifications, test results, and agency approvals, and void the user's authority to operate the equipment. -
Page 10: Mounting The Device On A Din Rail
Chapter 2 RUGGEDCOM RMC Installing the Device Installation Guide Section 2.1.1 Mounting the Device on a DIN Rail For DIN rail installations, the RMC can be equipped with a DIN rail bracket pre-installed on the back of the chassis. The bracket allows the device to be slid onto a standard 35 mm (1.4 in) DIN rail. -
Page 11: Connecting Power
Ground. Note that all line-to-ground transient protection circuitry will be disabled. IMPORTANT! Siemens requires the use of external surge protection in VDSL applications where the line may be subject to surges greater than that for which the device is rated. Use the following specifications as a... -
Page 12: Connecting Ac Power
Chapter 2 RUGGEDCOM RMC Installing the Device Installation Guide • Clamping Voltage: 50 V to 200 V • Insertion Loss: < 0.1 dB at 10 MHz • Peak Surge Current: 10 kA, 8x20µs waveform The following sections describe how to connect power to the device: •... -
Page 13: Connecting Dc Power
RUGGEDCOM RMC Chapter 2 Installation Guide Installing the Device Using a braided wire or other appropriate grounding wire, connect the surge ground terminal to the chassis ground connection. The surge ground terminal is used as the ground conductor for all surge and transient suppression circuitry internal to the unit. - Page 14 RUGGEDCOM RMC Chapter 2 Installation Guide Installing the Device Connecting DC Power...
-
Page 15: Communication Ports
RUGGEDCOM RMC Chapter 3 Installation Guide Communication Ports Communication Ports The RMC can be equipped with various types of communication ports to enhance its abilities and performance. To determine which ports are equipped on the device, refer to the factory data file available through . For more information on how to access the factory data file, refer to the User Guide for the RMC. - Page 16 Chapter 3 RUGGEDCOM RMC Communication Ports Installation Guide WARNING! Electric shock hazard – risk of serious personal injury and/or equipment interference. If shielded cables are used, make sure the shielded cables do not form a ground loop via the shield wire and the RJ45 receptacles at either end.
-
Page 17: Fiber Optic Ethernet Ports
RUGGEDCOM RMC Chapter 3 Installation Guide Communication Ports When connecting to end devices, the X-over switch should be selected to reflect the type of cabling used. Specifically, straight through should be selected when using straight through cabling, an crossover (X-over) should be selected when using crossover cabling. - Page 18 Chapter 3 RUGGEDCOM RMC Communication Ports Installation Guide Mode Selector Positioning Configuration Description Full-Duplex fiber FDX Mode partner (default) Reserved Should ONLY be used on 10FL series RMC products. The transparent mode can be utilized when BOTH the copper side and fiber side devices are capable of auto- negotiating duplex mode and speed as per TIA/EIA-785.
-
Page 19: Technical Specifications
RUGGEDCOM RMC Chapter 4 Installation Guide Technical Specifications Technical Specifications The following sections provide important technical specifications related to the device and available modules: • Section 4.1, “Power Supply Specifications” • Section 4.2, “Copper Ethernet Port Specifications” • Section 4.3, “Fiber Optic Ethernet Port Specifications”... -
Page 20: Fiber Optic Ethernet Port Specifications
To convert from peak to average, subtract 3 dBm. • Maximum segment length is greatly dependent on factors such as fiber quality, and the number of patches and splices. Consult a Siemens Sales associate when determining maximum segment distances. Power... -
Page 21: Operating Environment
RUGGEDCOM RMC Chapter 4 Installation Guide Technical Specifications Section 4.5 Operating Environment Parameter Range Comments Ambient Operating Temperature -40 to 85 °C Measured from a 30 cm (12 in) radius surrounding the center of the (-40 to 185 °F) enclosure. - Page 22 RUGGEDCOM RMC Chapter 4 Installation Guide Technical Specifications Mechanical Specifications...
-
Page 23: Dimension Drawings
RUGGEDCOM RMC Chapter 5 Installation Guide Dimension Drawings Dimension Drawings NOTE All dimensions are in millimeters, unless otherwise stated. 80.1 62.2 73.8 58.4 70.8 Figure 11: Overall Dimensions... - Page 24 Chapter 5 RUGGEDCOM RMC Dimension Drawings Installation Guide 67.3 62.2 92.5 58.4 82.2 35.6 11.4 Figure 12: Panel Mount Dimensions...
-
Page 25: Certification
RUGGEDCOM RMC Chapter 6 Installation Guide Certification Certification The RMC device has been thoroughly tested to guarantee its conformance with recognized standards and has received approval from recognized regulatory agencies. • Section 6.1, “Agency Approvals” • Section 6.2, “FCC Compliance”... -
Page 26: Emi And Environmental Type Tests
Chapter 6 RUGGEDCOM RMC Certification Installation Guide Section 6.4 EMI and Environmental Type Tests The RMC has passed the following EMI and environmental tests. IEC 61850-3 Type Tests Test Description Test Levels Severity Levels IEC 61000-4-2 Enclosure +/- 8 kV... - Page 27 5 kV (Fail-Safe Relay Output) DC Power ports 5 kV AC Power ports 5 kV Siemens specified severity level. IEEE 1613 (C37.90.x) EMI Immunity Type Tests NOTE The RMC meets Class 2 requirements for an all-fiber configuration and Class 1 requirements for copper ports.
- Page 28 Chapter 6 RUGGEDCOM RMC Certification Installation Guide Test Description Test Levels Severity Levels IEC 60068-2-2 Dry Heat Test Bd 85 °C (185 °F), 16 Hours IEC 60068-2-30 Humidity (Damp Test Db 95% (non-condensing), Heat, Cyclic) 55 °C (131 °F), 6 cycles...