hit counter script
Download
Share
Print this page
Honeywell MILLER Soll-MultiRail 17792 Instructions For Use And Maintenance Manual
  1. Manuals
  2. Brands
  3. Honeywell Manuals
  4. Safety Equipment
  5. MILLER Soll-MultiRail 17792
  6. Instructions for use and maintenance manual

Honeywell MILLER Soll-MultiRail 17792 Instructions For Use And Maintenance Manual

Anchorage device horizontal openable glider
Hide thumbs

Advertisement

Quick Links

Download this manual
Instruction for use and maintenance
Anchorage Device „Söll-MultiRail" horizontal
openable glider complying with DIN EN 795
Serial number:
Year of manufacture
(The following must be completed by the operator in permanent waterproof ink.)
Date of initial operation:
Operator/user:
Street:
Place:
Phone:
Stand: 01.07.2009
Part-No. 17792
:
www.honeywellsafety.com
Date of
purchase:
Fax:

Advertisement

loading

Related Manuals for Honeywell MILLER Soll-MultiRail 17792

Summary of Contents for Honeywell MILLER Soll-MultiRail 17792

  • Page 1 Instruction for use and maintenance Anchorage Device „Söll-MultiRail“ horizontal openable glider complying with DIN EN 795 Part-No. 17792 Serial number: Date of Year of manufacture purchase: (The following must be completed by the operator in permanent waterproof ink.) Date of initial operation: Operator/user: Street: Place:...

  • Page 2: Table Of Contents

    Articles 16 and 17 of the German Copyright Act. Honeywell Fall Protection Deutschland GmbH & Co. KG will prosecute any violations against this under Article 106 of the German Copyright Act.

  • Page 3: A Safety Precautions

    A 3. The operator must be able to present these instructions to the manufacturer of the SÖLL - system; (Honeywell Fall Protection Deutsch- land GmbH & Co. KG or one of its authorized dealers) upon request.
  • Page 4 In addition, such cases are completely unauthorised, as Söll gliders are tested and certified as complete systems. Full liability is therefore transferred to the operator! A 8. The glider has to be used only in combination with EN 361 compliant safety harnesses.

  • Page 5: B Checking Before Use

    Checking before use B 1. Ensure that the glider, safety harness, lanyard with a DIN EN 355 compliant fall arrestor, a fall arrestor or a travelling safety device as well as guide rails (= anchorage device) are in the flawless working condition and are functioning properly before and during their every use.

  • Page 6: C Using The Glider

    Using the glider The Söll anchorage device should be used only by personnel who are trained to handle this device safely. Every user must use a separate glider! Fit the EN 361 safety harness in accordance with the applicable instructions. If using: •...
  • Page 7 C 1. Mounting/removing the glider 1. Alternative Use: Opening / closing the glider Fig. 1 To open the glider, retract the knurled bushing (1.2) and turn the knurled nut (1.4) in the direction indicated by the arrow (A). After approximately one rotation, do not retract the knurled bushing (1.2) any further.
  • Page 8 2. Alternative Use: Fixed rail sealing (order no. 17404) Fig. 2 Remove the locking plate by loosening the screw (4.2). Place the glider (1.0) on the „Söll-MultiRail“ guide rail (2.0). After placing the locking plate (4.1), re-tighten it with the screw (4.2) to prevent the glider from sliding inadvertently.
  • Page 9 3. Alternative Use: Rail end stop with exit (Part-No. 23956) Fig. 3 Press the unlocking plate (5.1) downwards with one hand and place the glider (1.0) onto the guide rail (2.0) with the other. The glider can now be freely moved on the guide rail (2.0). For detaching, press the unlocking plate (5.1) downwards and pull the glider out from the rail.
  • Page 10 Note! Leave the position at which protection against falling has been ensured only when: • the glider (1.0) has been closed properly (i.e. tightened up to the end stop) • the locking plate (4.1) has been remounted • the unlocking plate has been pressed back to the initial position by the elastic force Note: The openable glider must not be combined with the horizontal track...

  • Page 11: D Maintenance

    Maintenance D 1. The regular maintenance of the "Söll-MultiRail glider" are to be performed considering the legal regulations, the conditions of use and environmental conditions. Maintenance must be performed by a compentent person, at least once a year. A competent person for the maintenance of this equipment is a person suitably trained or qualified by knowledge and practical experience to enable the maintenance to be performed properly.
  • Page 12 www.honeywellsafety.com...
  • Page 13 www.honeywellsafety.com...
  • Page 14 Further remarks www.honeywellsafety.com...
  • Page 15 Fig. 5 www.honeywellsafety.com...

  • Page 16: E Storage

    Storage The glider should be kept clean and as dry and dust-free as possible, and should not be stored near heat sources. After use the trolley should not be left attached to the system. Care When using the glider, always ensure that the gliding inserts have not worn out yet, and also check whether the stickers on the knurled bushing (1.2) and the knurled nut (1.4) are intact.