Advertisement
Quick Links
Standard Operating Procedure
HUSQVARNA TILE SAW 9" TS73R
Version 2 Issue date: 10/06/2016
Page 1 of 3
Name
Recommended Use
Section 1: Equipment Details
Manufacturer
Emergency Contact details
IMPORTANT: The information contained in this SOP is intended as a summary only. Users must
read the operating manual and familiarize themselves with the equipment before commencing
use.
Section 2: Hazards Identification
Husqvarna Tile Saw 9" TS73R
When used with a Diamond Disc, for water-lubricated
cutting of marble, stone, granite, brick and facings,
including porcelain, glazed tiles, ceramics etc
Husqvarna Construction Products
Supplied by Youngman Richardson & Co, NZ
wwwyrco.co.nz
Garry Bull (Upper Hutt Hire) 027 742 6583
HIGH SPEED BLADE Keep hands and limbs clear of
the blade and mechanism at all times. RISK of limbs
being crushed or severed. If a blockage occurs turn off
power, unplug the electrical cable and allow the
machine to come to a complete stop before clearing
obstructions.
Operate this item only on an electrical supply
equipped with a 30 mA earthed current-limiting circuit
breaker (RCCB).
DO NOT use the equipment for any other purpose
other than that for which it was designed. Use only an
approved blade supplied by Upper Hutt Hire.
Do not allow persons to operate machinery without full
and proper instruction in the use of the machine. Do
not allow person under 16 years age to operate the
machinery.
Always keep safety guards in place.
Avoid loose-fitting clothing. Risk of entrapment in
machinery.
Always ensure water supply is abundant, and dust
minimised.
Operation of the equipment must not be performed by
persons under the influence of alcohol, drugs, medications
or any chemical substances capable of impairing the
abilities of that person.
20 Goodshed Road Upper Hutt
Phone 04 528 4473
Advertisement
Related Manuals for Husqvarna TS73R
Summary of Contents for Husqvarna TS73R
- Page 1 Standard Operating Procedure HUSQVARNA TILE SAW 9” TS73R Version 2 Issue date: 10/06/2016 20 Goodshed Road Upper Hutt Page 1 of 3 Phone 04 528 4473 Husqvarna Tile Saw 9” TS73R Name Recommended Use When used with a Diamond Disc, for water-lubricated...
- Page 2 Standard Operating Procedure HUSQVARNA TILE SAW 9” TS73R Version 2 Issue date: 10/06/2016 20 Goodshed Road Upper Hutt Page 2 of 3 Phone 04 528 4473 Never leave the engine running when unattended. Shut the machine down even if unattended for a short period.
- Page 3 Upper Hutt Hire Ltd shall not be liable in any way for any reliance by any person or entity on the accuracy of information or data contained in this document or its attachments. Revision date June 2021 (SOP based on Husqvarna Manual TS73R 115 03 00-20 2007-03-15)