Related Manuals for Zanussi ZWY 71054SI
Summary of Contents for Zanussi ZWY 71054SI
- Page 1 User Manual GETTING STARTED? EASY. ZWY 71054SI ZWY 71054SE EN User Manual Washing Machine...
-
Page 2: Safety Information
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. -
Page 3: Safety Instructions
If the mains power supply cable is damaged, it must be • replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard. Before any maintenance operation, deactivate the appliance • and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam to clean •... -
Page 4: Product Description
• Do not use an extension hose if the inlet hose is can damage rubber parts of the washing too short. Contact the Authorised Service machine. Prewash such fabrics by hand before Centre for the replacement of the inlet hose. loading them into the washing machine. -
Page 5: Control Panel Description
CONTROL PANEL DESCRIPTION Cotton Quick 90° 1000 Cotton 60° Intensive Synthetics Delicates Easy Iron 40° Wool/Handwash 30° Rinse Refresh 20 min Mix 20° Drain & Spin On/Off button Start/Pause touchpad Programme selection touchpad Indicators: Child lock indicator Extra rinse indicator Temperature selection touchpad Door locked indicator Spin selection touchpad... - Page 6 Maximum load Programme Programme description Reference spin Temperature range (Type of load and soil level) speed Delicates 2,5 kg Delicate fabrics such as acrylics, viscose and mixed 40°C - Cold 1000 rpm fabrics requiring gentler washing. Normal soil. Wool/Handwash 1,5 kg Machine washable wool, hand washable wool and 40°C - Cold 1000 rpm...
-
Page 7: Consumption Values
Programme ■ ■ ■ ■ ■ ■ ■ Mix 20° 1) When you set this option, we recommend that you decrease the quantity of the laundry. It is possible to keep the full load but the washing results can be unsatisfactory. Recommended load: cotton: 3,5 kg, syn- thetics and delicates: 1,5 kg. - Page 8 Approximate Energy con- Water con- Remaining programme Programmes Load (kg) sumption sumption (li- duration (mi- moisture (%) (kWh) tre) nutes) Standard 40°C cot- 0,65 1) At the end of spin phase. 2) Not available for some models. Off Mode (W) Left On Mode (W) 0.48 0.48...
-
Page 9: Before First Use
DELAY START The related indicator comes on. With this option you can delay the start of a DRAIN & SPIN programme by 9, 6 or 3 hours. With this option you can perform the spin and drain The indicator of the set value is on. cycle. - Page 10 Compartment for liquid additives (fabric conditioner, starch). CAUTION! Do not exceed the MAX lev- ACTIVATING THE APPLIANCE Press and hold the On/Off button to activate or deactivate the appliance. A tune sounds when the appliance is activated. SETTING A PROGRAMME 1.
- Page 11 2. Wait a couple of minutes until the indicator You can cancel or change the set of goes off. the delay start before you touch the 3. You can open the lid. If necessary add or button . After touching the button remove the items.
-
Page 12: Hints And Tips
The appliance drains and spins automatically after approximately 18 hours (except for Wool programme). HINTS AND TIPS THE LAUNDRY LOAD – powder detergents for all types of fabric, – powder detergents for delicate fabrics (40 • Divide the laundry in: white, coloured, °C max) and woollens, synthetics, delicates and wool. - Page 13 CAUTION! Do not use alcohol, Always obey the instructions that you solvents or chemical products. find on the packaging of the product. DESCALING MAINTENANCE WASH If the water hardness in your area is high or With the low temperature programmes it is possible moderate, we recommend that you use a water that some detergent stays in the drum.
-
Page 14: Frost Precautions
FROST PRECAUTIONS 4. Set the Drain programme and let it operate until the end of the cycle. If the appliance is installed in an area where the 5. Turn the programme knob to Stop to temperature can be less than 0 °C, remove the disconnect the appliance from the power remaining water from the inlet hose and the drain supply. - Page 15 Problem Possible solution The appliance does not fill • Make sure that the water tap is open. with water properly. • Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. •...
-
Page 16: Technical Data
TECHNICAL DATA Dimension Width/ Height/ Depth/ To- 400 mm/ 890 mm/ 600 mm/ 600 mm tal depth Electrical connection Voltage 220-230 V Overall power 2200 W Fuse 10 A Frequency 50 Hz Level of protection against ingress of solid particles and IPX4 moisture ensured by the protective cover, except where the low voltage equipment has no protection against... - Page 20 WWW.ZANUSSI.COM/SHOP...