Related Manuals for Bosch Rexroth IndraControl VEP .2 Series
Summary of Contents for Bosch Rexroth IndraControl VEP .2 Series
- Page 1 Electric Drives Linear Motion and and Controls Hydraulics Assembly Technologies Pneumatics Service Rexroth IndraControl VEP**.2 R911310662 Edition 01 Project Planning Manual...
- Page 2 120-2100-B379-01/EN 08/05 First Edition Copyright 2005 Bosch Rexroth AG © Copying this document, giving it to others and the use or communication of the contents thereof without express authority, are forbidden. Offenders are liable for the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design (DIN 34-1).
-
Page 3: Table Of Contents
IndraControl VEP30.2 40.2 and 50.2 Contents Contents System Presentation Brief Description IndraControl VEP 30.2, VEP 40.2 and VEP 50.2..........1-1 IndraControl VEP**.2....................... 1-1 Embedded Terminals with Keypad..................1-2 Embedded Terminals with Touch Screen ................1-2 Front Panel of the IndraControl VEP 30.2................1-2 Front Panel of the IndraControl VEP 40.2................ - Page 4 Contents IndraControl VEP30.2 40.2 and 50.2 Ambient Conditions........................4-3 IndraControl VEP........................4-3 Weights ............................4-3 Used Standards ..........................4-4 Wear Parts ............................ 4-5 Compatibility Test ......................... 4-5 Dimensions Housing Dimensions........................5-1 Housing Dimensions of the IndraControl VEP 30.2CC ............5-1 Housing Dimensions of the IndraControl VEP 30.2CG ............
- Page 5 IndraControl VEP30.2 40.2 and 50.2 Contents Maintenance and Installation General Information ........................8-1 LCD Display..........................8-1 CMOS Battery..........................8-2 Extension Cards ........................... 8-2 Software General Information ........................9-1 First Commissioning ........................9-2 Touch Calibration.......................... 9-2 Rexroth CE Settings ........................9-3 Rexroth CE Settings –...
- Page 6 Contents IndraControl VEP30.2 40.2 and 50.2 13 Service & Support 13-1 13.1 Helpdesk ............................. 13-1 13.2 Service-Hotline ........................... 13-1 13.3 Internet............................13-1 13.4 Vor der Kontaktaufnahme... - Before contacting us..............13-1 13.5 Kundenbetreuungsstellen - Sales & Service Facilities ............... 13-2 DOK-SUPPL*-VEP**.2****-PR01-EN-P...
-
Page 7: System Presentation
IndraControl VEP30.2 40.2 and 50.2 System Presentation System Presentation Brief Description IndraControl VEP 30.2, VEP 40.2 and VEP 50.2 The embedded terminals IndraControl VEP 30.2, VEP 40.2 and VEP 50.2 are PC-based machine operator terminals. Depending on the respective application or configuration they can also perform control functionalities. Depending on its type the IndraControl VEP devices are provided with up to two PC104 slots for plug-in cards. -
Page 8: Embedded Terminals With Keypad
System Presentation IndraControl VEP30.2 40.2 and 50.2 PC box PC104 slots Depending on the device type one or two slots are equipped. The VEP 30.2CG has only one slot. Power supply 24 V DC Short-time UPS Integrated charging circuit and buffer capacitor board Fig. -
Page 9: Fig. 1-6: Vep30.2Cg - Front Panel
IndraControl VEP30.2 40.2 and 50.2 System Presentation VEP30.2CG with Touch Screen and 5 Keys VEP302CG.bmp Fig. 1-6: VEP30.2CG – Front panel DOK-SUPPL*-VEP**.2****-PR01-EN-P... -
Page 10: Front Panel Of The Indracontrol Vep 40.2
System Presentation IndraControl VEP30.2 40.2 and 50.2 Front Panel of the IndraControl VEP 40.2 VEP 40.2CE with Touch Screen VEP_40_Front.FH9 Fig. 1-7: VEP 40.2CE – Front panel DOK-SUPPL*-VEP**.2****-PR01-EN-P... -
Page 11: Front Panel Of The Indracontrol Vep 50.2
IndraControl VEP30.2 40.2 and 50.2 System Presentation Front Panel of the IndraControl VEP 50.2 VEP 50.2CH with Touch Screen IndraControlVEP50 VEP_50_Front.FH9 Fig. 1-8: VEP 50.2CH – Front panel Operating System For license reasons IndraControl VEP-type devices are only delivered with already installed operating system. For further information on the operating system please refer to chapter "Software". - Page 12 System Presentation IndraControl VEP30.2 40.2 and 50.2 DOK-SUPPL*-VEP**.2****-PR01-EN-P...
-
Page 13: Important Directions For Use
Note: Bosch Rexroth, as manufacturer, is not liable for any damages resulting from inappropriate use. In such cases, the guarantee and the right to payment of damages resulting from inappropriate use are forfeited. -
Page 14: Areas Of Use And Application
This includes, for example, operation under water, in the case of extreme temperature fluctuations or extreme maximum temperatures or if • Bosch Rexroth has not specifically released them for that intended purpose. Please note the specifications outlined in the general Safety Instructions! DOK-SUPPL*-VEP**.2****-PR01-EN-P... -
Page 15: Safety Instructions For Electric Drives And Controls
If you do not have the user documentation for your equipment, contact your local Bosch Rexroth representative to send this documentation immediately to the person or persons responsible for the safe operation of this equipment. -
Page 16: Hazards By Improper Use
Safety Instructions for Electric Drives and Controls IndraControl VEP30.2 40.2 and 50.2 Hazards by Improper Use High voltage and high discharge current! Danger to life or severe bodily harm by electric shock! DANGER Dangerous movements! Danger to life, severe bodily harm or material damage by unintentional motor movements! DANGER High electrical voltage due to wrong... -
Page 17: General Information
IndraControl VEP30.2 40.2 and 50.2 Safety Instructions for Electric Drives and Controls General Information • Bosch Rexroth AG is not liable for damages resulting from failure to observe the warnings provided in this documentation. • Read the operating, maintenance and safety instructions in your language before starting up the machine. -
Page 18: Protection Against Contact With Electrical Parts
Safety Instructions for Electric Drives and Controls IndraControl VEP30.2 40.2 and 50.2 • Operation is only permitted if the national EMC regulations for the application are met. The instructions for installation in accordance with EMC requirements can be found in the documentation "EMC in Drive and Control Systems". -
Page 19: Protection Against Electric Shock By Protective Low Voltage (Pelv)
IndraControl VEP30.2 40.2 and 50.2 Safety Instructions for Electric Drives and Controls To be observed with electrical drive and filter components: High electrical voltage on the housing! High leakage current! Danger to life, danger of injury by electric shock! ⇒ Connect the electrical equipment, the housings of all DANGER electrical units and motors permanently with the safety... -
Page 20: Protection Against Dangerous Movements
Safety Instructions for Electric Drives and Controls IndraControl VEP30.2 40.2 and 50.2 Protection Against Dangerous Movements Dangerous movements can be caused by faulty control of the connected motors. Some common examples are: • improper or wrong wiring of cable connections •... -
Page 21: Protection Against Magnetic And Electromagnetic Fields During Operation And Mounting
IndraControl VEP30.2 40.2 and 50.2 Safety Instructions for Electric Drives and Controls ⇒ Secure vertical axes against falling or dropping after switching off the motor power by, for example: - mechanically securing the vertical axes - adding an external braking/ arrester/ clamping mechanism - ensuring sufficient equilibration of the vertical axes The standard equipment motor brake or an external... -
Page 22: Protection Against Contact With Hot Parts
Safety Instructions for Electric Drives and Controls IndraControl VEP30.2 40.2 and 50.2 Protection Against Contact with Hot Parts Housing surfaces could be extremely hot! Danger of injury! Danger of burns! ⇒ Do not touch housing surfaces near sources of heat! Danger of burns! CAUTION After switching the equipment off, wait at least ten (10) -
Page 23: 3.11 Battery Safety
IndraControl VEP30.2 40.2 and 50.2 Safety Instructions for Electric Drives and Controls 3.11 Battery Safety Batteries contain reactive chemicals in a solid housing. Inappropriate handling may result in injuries or material damage. Risk of injury by incorrect handling! ⇒ Do not attempt to reactivate discharged batteries by heating or other methods (danger of explosion and cauterization). - Page 24 3-10 Safety Instructions for Electric Drives and Controls IndraControl VEP30.2 40.2 and 50.2 Notes DOK-SUPPL*-VEP**.2****-PR01-EN-P...
-
Page 25: Technical Data
IndraControl VEP30.2 40.2 and 50.2 Technical Data Technical Data Front Panel IndraControl VEP 30.2 VEP 30.2CC VEP 30.2CG Display 8.4"-TFT, 800 x 600 pixels 262,144 colors Operation Touch screen Touch and key operation with 5 keys Surface – Front panel Color: RAL 7035 light gray Front panel IP 65 according IP 40 according to DIN 40 050;... -
Page 26: Pc Box Of The Indracontrol Vep Devices
Technical Data IndraControl VEP30.2 40.2 and 50.2 PC Box of the IndraControl VEP Devices PC box Processor Intel Ultra Low Voltage Celeron 400MHz; integrated graphic controller with typ. 8MB shared memory 128 MB Main memory Compact Flash card 128 MB •... -
Page 27: Ambient Conditions
IndraControl VEP30.2 40.2 and 50.2 Technical Data Ambient Conditions IndraControl VEP In operation Storage/Transport Max. surrounding air temperature +5 °C ... +45 °C -20 °C to +60 °C Max. temperature gradient Temporal temperature changes up to Not defined 3 °C per minute Relative humidity Climatic class 3K3 according to Climatic class 3K3 according to... -
Page 28: Used Standards
Technical Data IndraControl VEP30.2 40.2 and 50.2 Used Standards The system components of the embedded terminals IndraControl VEP correspond to the following standards: Standard Meaning EN 60 204-1 Electrical equipment of machines EN 50 081-2 Basic technical standard, emitted interference (industrial environment) EN 50 082-2 Basic technical standard, noise immunity (industrial... -
Page 29: Wear Parts
5 years at continuous operation Fig. 4-9: Capacitor pack If you don't exactly know the conditions, Bosch Rexroth recommends to exchange the capacitor pack every 5 years. Compatibility Test All Rexroth controls and drives are developed and tested according to the latest state-of-the-art. - Page 30 Technical Data IndraControl VEP30.2 40.2 and 50.2 DOK-SUPPL*-VEP**.2****-PR01-EN-P...
-
Page 31: Dimensions
IndraControl VEP30.2 40.2 and 50.2 Dimensions Dimensions Housing Dimensions Housing Dimensions of the IndraControl VEP 30.2CC The front panel width of the VEP 30.2CC is 296 mm and the height is 200 mm. 8,4" VEP_30CC_Frontansicht.FH9 Fig. 5-1: VEP 30.2CC – Front panel DOK-SUPPL*-VEP**.2****-PR01-EN-P... -
Page 32: Fig. 5-2: Vep 30.2Cc - Side View
Dimensions IndraControl VEP30.2 40.2 and 50.2 15.5 VEP_302CC_Seitenansicht.FH9 Fig. 5-2: VEP 30.2CC – Side view VEP_302CC_Ansicht_auf_ das_Anschlussfeld.FH9 Fig. 5-3: VEP 30.2CC – Top view DOK-SUPPL*-VEP**.2****-PR01-EN-P... -
Page 33: Housing Dimensions Of The Indracontrol Vep 30.2Cg
IndraControl VEP30.2 40.2 and 50.2 Dimensions VEP_302CC_Ansicht_von_unten.FH9 Fig. 5-4: VEP 30.2CC – Bottom view Housing Dimensions of the IndraControl VEP 30.2CG The width of the VEP 30.2CG is 306 mm and the height is 241 mm. VEP_30CG_Frontansicht.FH9 Fig. 5-5: VEP 30.2CG – Front view DOK-SUPPL*-VEP**.2****-PR01-EN-P... -
Page 34: Fig. 5-6: Vep 30.2Cg - Rear View
Dimensions IndraControl VEP30.2 40.2 and 50.2 VEP_30CG_Rückansicht.FH9 Fig. 5-6: VEP 30.2CG – Rear view The fixing points illustrated in figure "VEP 30.2CG – Rear view" are 4 threaded bolts M4 with a length of 12 mm. DOK-SUPPL*-VEP**.2****-PR01-EN-P... -
Page 35: Housing Dimensions Of The Indracontrol Vep 40.2Ce
IndraControl VEP30.2 40.2 and 50.2 Dimensions Housing Dimensions of the IndraControl VEP 40.2CE The front panel width of the VEP 40.2CE is 350 mm and the height is 290 mm. 12,1" VEP_40CE_Frontansicht.FH9 Fig. 5-7: VEP 40.2CE – Front panel DOK-SUPPL*-VEP**.2****-PR01-EN-P... -
Page 36: Fig. 5-8: Vep 40.2Ce - Side View
Dimensions IndraControl VEP30.2 40.2 and 50.2 78.3 15.5 VEP_402CE_Seitenansicht.FH9 Fig. 5-8: VEP 40.2CE – Side view VEP_402CE_Ansicht_auf_das_Anschlussfeld.FH9 Fig. 5-9: VEP 40.2CE – Top view DOK-SUPPL*-VEP**.2****-PR01-EN-P... -
Page 37: Housing Dimensions Of The Indracontrol Vep 50.2Ch
IndraControl VEP30.2 40.2 and 50.2 Dimensions VEP_402CE_Ansicht_von_unten.FH9 Fig. 5-10: VEP 40.2CE – Bottom view Housing Dimensions of the IndraControl VEP 50.2CH The front panel width of the VEP 50.2CH is 407 mm and the height is 370 mm. 15,0" VEP_50CH_Frontansicht.FH9 Fig. -
Page 38: Fig. 5-12: Vep 50.2Ch - Side View
Dimensions IndraControl VEP30.2 40.2 and 50.2 15.5 VEP_502CH_Seitenansicht.FH9 Fig. 5-12: VEP 50.2CH – Side view VEP_502CH_Ansicht_auf_das_Anschlussfeld.FH9 Fig. 5-13: VEP 50.2CH – Top view DOK-SUPPL*-VEP**.2****-PR01-EN-P... -
Page 39: Installation Of A Second Pc104 Card
Optionally, a second PC104 card can be equipped for future extensions. For this, a different housing cover is required increasing the installation depth by 11 mm. Note: It is only allowed to use plug-in cards released by Bosch Rexroth. Installation Installation Notes •... -
Page 40: Mounting Dimensions Of The Indracontrol Vep 30.2Cc
5-10 Dimensions IndraControl VEP30.2 40.2 and 50.2 Mounting Dimensions of the IndraControl VEP 30.2CC Mounting cut-out 135.5 135.5 12.5 VEP_30CC_Rückansicht.FH9 Fig. 5-15: Mounting dimensions of the IndraControl VEP 30.2CC DOK-SUPPL*-VEP**.2****-PR01-EN-P... -
Page 41: Mounting Dimensions Of The Indracontrol Vep 30.2Cg's Bracket Housing
5-11 IndraControl VEP30.2 40.2 and 50.2 Dimensions Mounting Dimensions of the IndraControl VEP 30.2CG's Bracket Housing VEP_30CG_Einbaumaße.FH9 Fig. 5-16: Mounting dimensions – Bracket housing of the IndraControl VEP 30.2CG DOK-SUPPL*-VEP**.2****-PR01-EN-P... -
Page 42: Mounting Dimensions Of The Indracontrol Vep 40.2Ce
5-12 Dimensions IndraControl VEP30.2 40.2 and 50.2 Mounting Dimensions of the IndraControl VEP 40.2CE Mounting cut-out Seal (remove protective foil before mounting) 167.5 167.5 VEP_40CE_Rückansicht.FH9 Fig. 5-17: Mounting dimensions of the IndraControl VEP 40.2CE DOK-SUPPL*-VEP**.2****-PR01-EN-P... -
Page 43: Mounting Dimensions Of The Indracontrol Vep 50.2Ch
5-13 IndraControl VEP30.2 40.2 and 50.2 Dimensions Mounting Dimensions of the IndraControl VEP 50.2CH Mounting cut-out Seal (remove protective foil before mounting) VEP_50CH_Rückansicht.FH9 Fig. 5-18: Mounting dimensions of the IndraControl VEP 50.2CH DOK-SUPPL*-VEP**.2****-PR01-EN-P... - Page 44 5-14 Dimensions IndraControl VEP30.2 40.2 and 50.2 DOK-SUPPL*-VEP**.2****-PR01-EN-P...
-
Page 45: Display And Operating Components
IndraControl VEP30.2 40.2 and 50.2 Display and Operating Components Display and Operating Components Backlight Switch-Off The backlight as background lighting of the display has a limited lifetime (see section 4.9, "Wear Parts"). To extend the service life of the LCD backlight, the flat screen display features a backlight dimming. -
Page 46: Operating Components Of The Indracontrol Vep 30.2Cg
Display and Operating Components IndraControl VEP30.2 40.2 and 50.2 Operating Components of the IndraControl VEP 30.2CG The VEP 30.2CG provides a keypad with 5 keys. Keypad Position of the Keys IndraControl VEP 30 Front_VEP30CG.FH9 Fig. 6-2: Position of the keys VEP 30.2CG, key Corresponding key of a standard keyboard Left arrow... -
Page 47: Touch Screen
IndraControl VEP30.2 40.2 and 50.2 Display and Operating Components Touch Screen All variants are provided with a touch screen, that allows the operation of the application software via the touch-sensitive surface of the display. A short touch of the touch screen is taken as "left mouse click". To carry out a "right mouse click", the touch screen must be touched at the corresponding position for approx. - Page 48 Display and Operating Components IndraControl VEP30.2 40.2 and 50.2 DOK-SUPPL*-VEP**.2****-PR01-EN-P...
-
Page 49: Pin Assignments Of The Indracontrol Vep
IndraControl VEP30.2 40.2 and 50.2 Pin Assignments of the IndraControl VEP Pin Assignments of the IndraControl VEP Connector Panel without Special Interfaces VEP2_Anschlussfeld.FH9 Fig. 7-1: Connector panel without special interfaces Connector Panel with PROFIBUS DP Master VEP2_Anschlussfeld_Profibus_DP.FH9 Fig. 7-2: Connector panel with PROFIBUS DP master Connector Panel with PROFIBUS DP Master and Exemplarily Second PC104 Plug-In Card VEP2_Anschlussfeld_Erweitert.FH9... -
Page 50: Interfaces Of The Indracontrol Vep
Pin Assignments of the IndraControl VEP IndraControl VEP30.2 40.2 and 50.2 Interfaces of the IndraControl VEP Note: Not each variant provides all the described interfaces. Which interfaces are integrated in the respective device depends on the device configuration. Malfunctions caused by insufficient shielding! Use only shielded cables and metallic/conductive ⇒... -
Page 51: Serial Interface Com1
IndraControl VEP30.2 40.2 and 50.2 Pin Assignments of the IndraControl VEP Serial Interface COM1 Serial Interface COM1 D-Sub male connector, 9-pin Type: RS232 Cable length: Max. 15 m Cable type: Shielded, cross section min. 0.14 mm² Transmission rate: Max. 115200 bits/s Handshake: Hardware and software handshake (XON, XOFF) Interrupt (IRQ):... -
Page 52: Usb Interfaces
Pin Assignments of the IndraControl VEP IndraControl VEP30.2 40.2 and 50.2 USB Interfaces USB Interfaces The devices feature two USB interfaces (USB1 and USB2) according to the USB 1.1-specification. Note: The maximum power consumption of the connected device must not exceed 500 mA. If the load exceeds 500 mA, the internal current monitoring is activated. -
Page 53: Ethernet Interfaces
IndraControl VEP30.2 40.2 and 50.2 Pin Assignments of the IndraControl VEP Ethernet Interfaces Ethernet Interfaces The embedded terminal can be connected with an Ethernet network via an Ethernet interface. RJ45 female connector, 8-pin Type: Ethernet 10Base T / 100Base X Cable length: Max. -
Page 54: Vga Interface
Pin Assignments of the IndraControl VEP IndraControl VEP30.2 40.2 and 50.2 VGA Interface VGA Connection of an External An external monitor (CRT), that can be operated parallel to the integrated Monitor flat screen via the integrated video adapter, can be connected to the VGA connection. -
Page 55: Combined Keyboard/Mouse Interface
IndraControl VEP30.2 40.2 and 50.2 Pin Assignments of the IndraControl VEP Combined Keyboard/Mouse Interface Keyb. – PS/2 Mini DIN Keyboard / PS/2 Mini-DIN female connector, 6-pin Mouse Interface Cable length: Max. 1.5 m Cable type: Shielded, cross section min. 0.14 mm² Fig. -
Page 56: Fig. 7-17: Safety Transformer According To En 60742
Pin Assignments of the IndraControl VEP IndraControl VEP30.2 40.2 and 50.2 Danger without protective separation! ⇒ The 24 VDC input voltage must comply with the requirements of the "Protective separation". Plug and unplug the connector only in no-voltage ⇒ DANGER condition! 400V + 5% 400V... -
Page 57: Fig. 7-19: Wiring Of The Power Connection 24 Vdc And The Embedded Terminal
IndraControl VEP30.2 40.2 and 50.2 Pin Assignments of the IndraControl VEP (green/yellow) Power supply with safety transformer acc. to EN 60742 24 VDC Cross-sections depending on current consumption, min. of 4 mm . For higher current con- sumption use 2 x 4 mm . (blue) Length max. -
Page 58: Profibus Master Interface Dp-M
7-10 Pin Assignments of the IndraControl VEP IndraControl VEP30.2 40.2 and 50.2 PROFIBUS Master Interface DP-M This interface is only provided for IndraControl VEP devices with PROFIBUS configuration. Signal designation Signal designation RGND – Reference potential RxD/TxD-P – Transmit/receive DGND – Reference potential VP –... - Page 59 7-11 IndraControl VEP30.2 40.2 and 50.2 Pin Assignments of the IndraControl VEP Status and Diagnostic Indicators PROFIBUS Master The status and diagnostic indicators of the PROFIBUS master card are situated in special housing cut-outs on the rear side of the IndraControl VEP devices.
-
Page 60: Cable Outlet Of The Vep30.2Cg
7-12 Pin Assignments of the IndraControl VEP IndraControl VEP30.2 40.2 and 50.2 Cable Outlet of the VEP30.2CG The outlet for the connection cables is situated on the rear side of the VEP30.2CG device. VEP302_CG_Kabelabgang.bmp Fig. 7-23: Cable outlet of the VEP30.2CG To guide the cables in a bundle away from the device, it is recommended to use flexible, divisible corrugated tubes with a nominal width of 23 mm manufactured by PMA. -
Page 61: Maintenance And Installation
Concerning spare parts function compatibility is ensured for at least 5 years. LCD Display A fading backlight causes a progressive deterioration of the LCD display's readability, so that a backlight exchange will be necessary. For further information please contact the Bosch Rexroth Service. DOK-SUPPL*-VEP**.2****-PR01-EN-P... -
Page 62: Cmos Battery
CAUTION! Bosch Rexroth Service. Due to the use of the embedded operating system, you can insert only Insert an Extension Card special extension cards in the IndraControl VEP devices. To exchange extension cards, please contact the Bosch Rexroth Service. DOK-SUPPL*-VEP**.2****-PR01-EN-P... -
Page 63: Software
IndraControl VEP30.2 40.2 and 50.2 Software Software General Information The IndraControl VEP-type devices are delivered with the embedded operating system Microsoft Windows CE .NET 4.2. The operating system contained in the FWA has to be separately ordered. Furthermore, this FWA contains the PLC "IndraLogicWinCE" and the visualization software WinStudio "lite". -
Page 64: First Commissioning
Software IndraControl VEP30.2 40.2 and 50.2 First Commissioning To be able to configure the IndraControl VEP devices comfortably during the first commissioning, the configuration applications touch calibration and the Rexroth CE Settings start automatically. For just delivered devices these settings are already made ex works. Note: To reset the IndraControl VEP to its original status, (e. -
Page 65: Rexroth Ce Settings
IndraControl VEP30.2 40.2 and 50.2 Software Rexroth CE Settings All basic settings of the IndraControl VEP devices are made by the tool "Rexroth CE Settings". This tool starts automatically during the first commissioning after the touch calibration. As an alternative, it can be started via the desktop icon "Rexroth CE Settings"... -
Page 66: Rexroth Ce Settings - Application Settings
Software IndraControl VEP30.2 40.2 and 50.2 Rexroth CE Settings – Application Settings In this tab the settings for autostart and the visualization connection to the control are configured. Application_VEP2.bmp Fig. 9-5: Rexroth CE Settings – Application Settings Visualization Data Source •... -
Page 67: Rexroth Ce Settings - Data Server
IndraControl VEP30.2 40.2 and 50.2 Software Visualization Selection of the start application: The selection box "start PLC automatically (license needed)" is only a display function. It indicates, if the PLC is automatically started. It is ensured, that the PLC is started before the visualization. -
Page 68: Rexroth Ce Settings - System Info
Software IndraControl VEP30.2 40.2 and 50.2 start FTP server automatically The autostart of the internal FTP server can be set here. start WEB server automatically The autostart of the internal web server can be set here. start Telnet server automatically The autostart of the internal telnet server can be set here. -
Page 69: Windows Ce 4.2 .Net
IndraControl VEP30.2 40.2 and 50.2 Software Windows CE 4.2 .NET Desktop.bmp Fig. 9-8: Windows CE 4.2 .NET desktop The Windows CE 4.2 .NET operating system image provides various programs and tools. Operation Touch Screen The IndraControl VEP devices are operated by touch screen. For this, use your finger or better a touch pen. -
Page 70: Memory Distribution
Software IndraControl VEP30.2 40.2 and 50.2 Memory Distribution Windows CE is an embedded operating system using parts of the working memory as RAM disk. A part of the working memory is used for this RAM disk. The rest of the working memory is provided as program memory and as storage memory. -
Page 71: Fig. 9-10: Selecting The Virtual Keyboard
IndraControl VEP30.2 40.2 and 50.2 Software SetKeyboard.bmp Fig. 9-10: Selecting the virtual keyboard SmallKeyboard.bmp Fig. 9-11: Virtual keyboard, small LargeKeyboard.bmp Fig. 9-12: Virtual keyboard, large DOK-SUPPL*-VEP**.2****-PR01-EN-P... -
Page 72: Usb Support Of The Indracontrol Vep
Windows CE .NET 4.2 is an embedded operating system with selected devices and drivers. For this reason, only particular USB devices released by Bosch Rexroth can be operated at the IndraControl VEP devices. It is possible that other devices mentioned in the table below may work, however, Bosch Rexroth does not assume any warranty for this. -
Page 73: Ftp Server
9-11 IndraControl VEP30.2 40.2 and 50.2 Software Further Desktop Icons • My Computer: Shows data structure files IndraControl VEP. • Recycle Bin: Recycle bin. • My Documents: Opens the folder "My Documents". • Save Registry: Saves the Windows CE 4.2 .NET registry. •... -
Page 74: Indralogicwince
9-12 Software IndraControl VEP30.2 40.2 and 50.2 IndraLogicWinCE The IndraControl VEP devices contain the soft PLC IndraLogicWinCE. This soft PLC is EN 61131-3-compliant. To be able to use this PLC in the IndraControl VEP devices, it is necessary to order a license to enable the IndraLogicWinCE. -
Page 75: Fig. 9-16: Winstudio Ce Server - Remote Agent
9-13 IndraControl VEP30.2 40.2 and 50.2 Software RemoteAgent.bmp Fig. 9-16: WinStudio CE Server – Remote Agent • Connection status: Shows the status of the connection. • Log: Shows log messages. • Setup: Button to call up the setup dialog. • Start: Button to start the visualization application. •... - Page 76 9-14 Software IndraControl VEP30.2 40.2 and 50.2 DOK-SUPPL*-VEP**.2****-PR01-EN-P...
-
Page 77: Ordering Information
10-1 IndraControl VEP30.2 40.2 and 50.2 Ordering Information Ordering Information 10.1 Type Code The embedded terminals VEP 30.2, VEP 40.2 and VEP 50.2 are available as different variants according to the following type codes: DOK-SUPPL*-VEP**.2****-PR01-EN-P... -
Page 78: Vep 30.2
4.1.2 8.4", Touch-Screen; Housing with 5 keys ..= CG customized design 4.2.1 Bosch: 8.4", Touch-Screen (suitable for food industry) . . . = CD Additional option none ......= N Memory capacity (RAM) 64 MB . -
Page 79: Vep 40.2
4.1.1 12.1", Touch-Screen (suitable for industry food) . . . = CE customized design 4.1.2 Bosch: 12.1", Touch-Screen (suitable for industry food) . . . = CF Additional option none ......= N Short time UPS. -
Page 80: Vep 50.2
10-4 Ordering Information IndraControl VEP30.2 40.2 and 50.2 VEP 50.2 Abbrev. Column 1 2 3 4 6 7 8 9 1 2 3 4 6 7 8 9 1 2 3 4 6 7 8 9 1 2 3 4 6 7 8 9 Example: V E P 5 0 . -
Page 81: 10.2 Accessories
10-5 IndraControl VEP30.2 40.2 and 50.2 Ordering Information 10.2 Accessories Connectors and Ready-Made Cables Ordering designation Mating connector of the Rexroth cable Design of the of the unit cable end prefabricated cables INS0541/K01 INS0541/K01 IKB0033 IKB0033 IKB0033/000.0 PN: R911291808 PROFIBUS cable INS0541/K01 IKB0034 IKB0034... - Page 82 10-6 Ordering Information IndraControl VEP30.2 40.2 and 50.2 DOK-SUPPL*-VEP**.2****-PR01-EN-P...
-
Page 83: List Of Figures
11-1 IndraControl VEP30.2 40.2 and 50.2 List of Figures List of Figures Fig. 1-1: IndraControl VEP 30.2 – Front panel 1-1 Fig. 1-2: IndraControl VEP 40.2 – Front panel 1-1 Fig. 1-3: IndraControl VEP 50.2 – Front panel 1-1 Fig. 1-4: PC box of the VEP devices 1-2 Fig. - Page 84 11-2 List of Figures IndraControl VEP30.2 40.2 and 50.2 Fig. 7-2: Connector panel with PROFIBUS DP master 7-1 Fig. 7-3: Connector panel with PROFIBUS DP master and exemplarily second PC104 plug-in card 7-1 Fig. 7-4: Interfaces of the IndraControl VEP 7-2 Fig.
- Page 85 11-3 IndraControl VEP30.2 40.2 and 50.2 List of Figures Fig. 10-4: VEP 40.2 – Type code, continuation 10-3 Fig. 10-5: VEP 50.2 – Type code 10-4 Fig. 10-6: VEP 50.2 – Type code, continuation 10-4 Fig. 10-7: Connectors and cables for IndraControl VEP devices 10-5 Fig.
- Page 86 11-4 List of Figures IndraControl VEP30.2 40.2 and 50.2 DOK-SUPPL*-VEP**.2****-PR01-EN-P...
-
Page 87: Index
12-1 IndraControl VEP30.2 40.2 and 50.2 Index Index 24 VDC power supply 7-7 Accessories 10-5 Air pressure 4-3 Ambient conditions 4-3 Appropriate use Area of application 2-2 Introduction 2-1 Uses 2-2 Backlight switch-off 6-1 COM1 7-3 Compatibility test 4-5 Connectors and ready-made cables 10-5 Dimensions 5-1 Housing dimensions of the IndraControl VEP 30.2CC 5-1 Housing dimensions of the IndraControl VEP 30.2CG 5-3... - Page 88 12-2 Index IndraControl VEP30.2 40.2 and 50.2 Mounting dimensions Bracket housing of the IndraControl VEP 30.2CG 5-11 IndraControl VEP 30.2CC 5-10 IndraControl VEP 50.2CH 5-13 Operating components of the IndraControl VEP 30.2CG 6-2 Ordering information 10-1 Pin assignments of the IndraControl VEP 7-1 PS/2 keyboard connection 7-7 Relative humidity 4-3 Safety Instructions for Electric Drives and Controls 3-1...
-
Page 89: Helpdesk
13-1 IndraControl VEP30.2 40.2 and 50.2 Service & Support Service & Support 13.1 Helpdesk Unser Kundendienst-Helpdesk im Hauptwerk Lohr Our service helpdesk at our headquarters in Lohr am am Main steht Ihnen mit Rat und Tat zur Seite. Main, Germany can assist you in all kinds of inquiries. Sie erreichen uns Contact us +49 (0) 9352 40 50 60... -
Page 90: Sales & Service Facilities
Tel.: +49 (0)171 333 88 26 service.svc@boschrexroth.de Vertriebsgebiet Süd Vertriebsgebiet West Gebiet Südwest Germany South Germany West Germany South-West Bosch Rexroth AG Bosch Rexroth AG Bosch Rexroth AG Landshuter Allee 8-10 Regionalzentrum West Service-Regionalzentrum Süd-West 80637 München Borsigstrasse 15 Siemensstr. 1... - Page 91 Italy - Italien Netherlands - Niederlande/Holland Bosch Rexroth S.p.A. Bosch Rexroth S.p.A. Bosch Rexroth S.p.A. Bosch Rexroth Services B.V. Via Mascia, 1 Via del Progresso, 16 (Zona Ind.) Via Isonzo, 61 Technical Services 80053 Castellamare di Stabia NA 35020 Padova...
- Page 92 Australia - Australien South Africa - Südafrika AIMS - Australian Industrial TECTRA Automation (Pty) Ltd. Bosch Rexroth Pty. Ltd. Machinery Services Pty. Ltd. 100 Newton Road, Meadowdale No. 7, Endeavour Way 28 Westside Drive Edenvale 1609 Braeside Victoria, 31 95...
- Page 93 China China China China Shanghai Bosch Rexroth Shanghai Bosch Rexroth Bosch Rexroth (China) Ltd. Bosch Rexroth (China) Ltd. Hydraulics & Automation Ltd. Hydraulics & Automation Ltd. Satellite Service Office Changchun Satellite Service Office Wuhan No.122, Fu Te Dong Yi Road 4/f, Marine Tower Rm.
- Page 94 Canada West - Kanada West Mexico Mexico Bosch Rexroth Canada Corporation Bosch Rexroth Canada Corporation Bosch Rexroth Mexico S.A. de C.V. Bosch Rexroth S.A. de C.V. Burlington Division 5345 Goring St. Calle Neptuno 72 Calle Argentina No 3913 3426 Mainway Drive Burnaby, British Columbia Unidad Ind.
- Page 96 Bosch Rexroth AG Electric Drives and Controls P.O. Box 13 57 97803 Lohr, Germany Bgm.-Dr.-Nebel-Str. 2 97816 Lohr, Germany Phone +49 (0)93 52-40-50 60 +49 (0)93 52-40-49 41 service.svc@boschrexroth.de www.boschrexroth.com Printed in Germany R911310662 DOK-SUPPL*-VEP**.2****-PR01-EN-P...