Ports - Siemens SCALANCE XC-200 Set Up And Configuration
Service bridge
Hide thumbs
Also See for SCALANCE XC-200:
- Configuration manual (270 pages) ,
- Operating instructions manual (84 pages) ,
- Configuration manual (618 pages)
Table of Contents
Advertisement
4 Configuration file
Figure 4-1
4.1.2
Ports
System > Ports
Figure 4-2
1
The type, status, etc. of the ports are set in the "System > Ports" menu. The
following settings are provided for the Service Bridge:
(1) Port Name: The port name can be adjusted if required.
(2) Port type:
–
Port type "Switch-Port PVLAN Promiscuous" is configured for Port 1 (plant
bus). Promiscuous ports belong to a Primary PVLAN; devices at a
promiscuous port can communicate with all the other devices of the
PVLAN.
–
Port type "Switch-Port PVLAN Host" is set for the remaining ports (PNSeg).
Host ports belong to a Secondary PVLAN. Devices on a host port can only
communicate with certain devices of the PVLAN.
(3) Status:
–
Port 1 (plant bus) is enabled, i.e. activated.
–
The remaining ports (PNSeg) are disabled as "Link down" and can be
enabled from this menu if required.
Service Bridge – Setup and Configuration
Entry ID: 109747975,
V1.4,
2
3
05/2019
38
Hide quick links:
Advertisement
Table of Contents
