Table of Contents
Advertisement
Connecting the Sonos System for Playback
By connecting this unit and a Sonos Connect, you can transfer music and sound
sources on the Sonos App to this unit. By going through the Sonos Connect, you
can play this unit through other Sonos devices in the network in the same group,
or you can just play on this unit. Furthermore, by connecting this unit and the
Sonos Connect to the same network, the power of this unit turns on automatically
when music starts playing, and the linked function to switch input works.
• If "System Setup" - "Hardware" - "Power Management" - "Network Standby" is
set to "Off " in the Home, manually turn the unit on and then press NET on the
remote controller. In the factory default setting, the Network Standby function (
p169) is set to On.
Necessary Equipment
• Sonos Connect
• RCA Audio Cable (Supplied with Sonos Connect)
How to Connect This Unit and Sonos
Connect
1. Connect the Sonos Connect to the AUDIO IN jack of this unit with the RCA
audio cable supplied with the Sonos Connect. Any input can be used other
than the PHONO input.
• You can also connect with a digital cable. For details, refer to the instruction
manual of the Sonos.
• You can rename the input that is displayed on the unit to a more logical
name. For example, you can change the name of input that the Sonos
Connect is plugged into from "CD" (or other input) to "SONOS". Press the
button on the remote controller to display the Home screen, and select
"System Setup" - "Source" - "Name Edit" to change the name.
Contents
Connections
≫
Setting Up
A setup is required to play Sonos on this unit. Make the setting according to the
following procedure.
1. Press the
button on the remote controller to display the Home screen,
select "System Setup" - "Hardware" - "Works with SONOS", and press the
ENTER button.
2. Select the following items with the cursors
Input Selector:
Enable the interlocking function with the Sonos Connect. With the cursors
, select the input selector to which the Sonos Connect is connected.
Connected Device:
Press the ENTER button to display Sonos devices connected to the same
network as the network of this unit. Select the Sonos Connect connected to
the unit and press the ENTER button.
• Products (e.g. Play:3 unequipped with an output terminal) other than the
Sonos Connect are also displayed in the device list and selectable. In
that case, when playback on the Sonos side starts, the input is switched,
however, audio is not output. Select the room name of the connected
Sonos Connect.
• Up to 32 devices can be displayed on the Sonos product list screen. If you
cannot find the Sonos Connect to be interlocked, return to the previous
screen, turn off the product you do not want to interlock, and try again.
Output Zone:
With the cursors
"Main": Outputs audio only to the main room (where this unit is located).
"Zone 2": Outputs audio only to the separate room (ZONE 2).
"Main/Zone 2": Outputs audio to both the main room and separate room.
"Zone 3": Outputs audio only to the separate room (ZONE 3).
"Main/Zone 3": Outputs audio to both the main room and separate room
(ZONE 3).
"Zone 2/Zone 3": Outputs audio to both the separate rooms (ZONE 2 and
ZONE 3).
115
Front Panel≫ Rear Panel≫ Remote≫
Playback
≫
/
and set each item.
/ , select the ZONE where you want to listen to the music.
Setup
≫
≫
/
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
