Table of Contents
Advertisement
„ DTS/IMAX
Change the setting of when DTS signals are input.
Setting Item
Default Value
Dialog Control
0 dB
IMAX Mode
Auto
IMAX User
Auto
Setting
IMAX Bass
On
Feeding
IMAX LFE Mute
0 dB
Level
Setting Details
You can increase the volume of dialog portion of
the audio up to 6 dB by 1 dB step so that you can
hear the dialog easily in noisy atmosphere.
• This cannot be set for content other than DTS:X.
• Depending on the content, this function may not
be selected.
Set the IMAX sound mode.
"Auto": IMAX sound mode is automatically applied
when IMAX content is detected.
"On": In cases when this unit is unable to recognize
IMAX content, you can apply the IMAX sound
mode by turning this setting "On".
"Off": Disable this function
When playing IMAX content with the IMAX sound
mode, select whether to automatically apply the
speaker setting recommended by IMAX or to set it
manually.
"Auto": To use the speaker setup recommended by
IMAX.
"Manual": To manually set "IMAX Bass Feeding"
and "IMAX LFE Mute Level".
• This cannot be selected when the IMAX Mode
is "Off".
Set the route for the bass component of the audio.
"On": The bass component of each channel is output
p160)
according to the crossover settings (
"Off": Only the LFE signal is output.
• This cannot be selected when the "IMAX User
Setting" is "Auto".
You can set the volume for the LFE when IMAX
signals are being input. Select "–∞ dB" or a value
between "0 dB" and "-20 dB".
• This cannot be selected when the "IMAX User
Setting" is "Auto".
Contents
Connections
≫
„ LFE Mute Level
Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series,
Multichannel PCM, and DSD signals.
Setting Item
Default Value
LFE Mute Level
0 dB
„ Volume
Change the Volume settings.
Setting Item
Default Value
Mute Level
-∞ dB
Volume Limit
Off
Power On Level
Last
Headphone Level 0.0 dB
164
Front Panel≫ Rear Panel≫ Remote≫
Playback
Setup
≫
≫
Setting Details
Select the low-frequency effect (LFE) level of each
type of signal from "0dB" to "-∞dB". If the low-
frequency effect sound is too strong, select "–20dB"
or "–∞dB".
• This function is disabled when the IMAX sound
mode has been applied.
Setting Details
Set the volume lowered from the listening volume
when muting is on. Select a value from "-∞ dB",
"-40 dB" and "-20 dB".
Set the maximum value to prevent the volume
from becoming too loud. Select a value from "Off",
"-32 dB" to "+17 dB".
Set the volume level of when the power is turned
on. Select a value from "Last" (Volume level before
entering standby mode), "-∞ dB", and "-81.5 dB" to
"+18.0 dB".
• You cannot set a higher value than that of
"Volume Limit".
Adjust the output level of headphones. Select a
value between "-12.0 dB" and "+12.0 dB".
≫
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
