Cisco 7609 Installing page 4

Internet router

Hide thumbs Also See for 7609:

Installing the Rack-Mount Kit

Note

Caution

Required Tools

Installing the Shelf and Crossbar Brackets

Step 1

Step 2

Step 3

Step 4

Cisco 7609 Internet Router Installation Guide

3-4

Chassis height is measured in rack units (RU).

If the rack is on wheels, ensure that the brakes are engaged or that the rack is

otherwise stabilized.

This kit is not suitable for use with racks with obstructions (such as a power strip)

that could impair access to field-replaceable units (FRUs).

These tools and equipment are required to install the rack-mount kit:

•

Number 1 and number 2 Phillips-head screwdrivers

3/16-inch flat-blade screwdriver

•

Tape measure and level

•

To install the shelf and crossbar brackets, perform these steps:

Position one of the two shelf brackets in the rack as shown in

Secure the shelf bracket to the rack by using three 12-24 x 3/4-inch or

10-32 x 3/4-inch screws.

Repeat Steps 1 and 2 for the second shelf bracket. Make sure that the second shelf

bracket is level with the first bracket.

Attach the crossbar bracket to the back of the shelf brackets using two M3 screws

as shown in

Figure

3-2.

Chapter 3

Installing the Cisco 7609 Internet Router

Figure

3-1.

OL-5079-04

Table of Contents