Download Print this page

Installing The Stabilizer Kit - Cisco 7609 Installing

Internet router

Hide thumbs Also See for 7609:

Installing the Stabilizer Kit

Note

Step 1

Step 2

Cisco 7609 Internet Router Installation Guide

3-10

The stabilizer kit is included only in the accessory kits for the Cisco 7609

Internet Router.

If you are not installing the Cisco 7609 Internet Router in a rack, you must install

stabilizer brackets to the bottom of the chassis. The stabilizer brackets reduce the

possibility that the freestanding chassis will tip over.

Open the stabilizer kit package and use the kit contents list in

that all parts are included.

Table 3-2

Stabilizer Kit Contents

Quantity

Part Description

M4 Phillips countersunk-head screws

Stabilizer brackets

Have a second person available to perform this procedure.

To install the stabilizer brackets, perform these steps:

Have one person tilt and hold the chassis to one side.

With the chassis tilted, attach the stabilizer bracket to the side of the chassis with

the eight M4 screws as shown in

Chapter 3

Installing the Cisco 7609 Internet Router

Figure

3-5.

Table 3-2

to verify

Received

OL-5079-04

Table of Contents