Table of Contents
Advertisement
Installing a Memory Upgrade
Installing a Memory Upgrade
Observe the following warnings, cautions, and notes when installing additional system memory.
The following statement applies to DC models:
Before performing any of the following procedures, ensure that power is removed from the DC circuit.
Warning
To ensure that all power is OFF, locate the circuit breaker on the panel board that services the DC
circuit, switch the circuit breaker to the OFF position, and tape the switch handle of the circuit
breaker in the OFF position.
The following statements apply to both AC and DC models:
Warning
Before working on a system that has an On/Off switch, turn OFF the power and unplug the power cord.
Caution
If you remove the chassis cover, always reinstall the cover. Running the PIX security appliance without the
chassis cover causes the system to overheat and and might damage the electrical components.
Memory Installation Steps
Depending on the software version and feature license installed on the PIX 515/515E security appliance,
you might need to upgrade the system memory to run newer software versions or more robust software
features.
PIX software Version 6.3 and previous software releases require a minimum of 32 MB of memory with
the Restricted license, and 64 MB of memory with the Unrestricted and Failover licenses.
PIX software Version 7.0 requires a minimum of 64 MB of memory with the Restricted license, and
128 MB of memory with the Unrestricted and Failover licenses.
If you want to upgrade the feature license from Restricted to Unrestricted or Failover, or upgrade the
software from Version 6.3 to Version 7.0, you need to upgrade the memory.
Software Version 7.0 is supported only on the PIX 515/515E security appliance. New PIX 515E security
Note
appliances shipped after the general availability of PIX software Version 7.0 have enough memory to run
version 7.0 and the software license ordered.
Table 4-4
Table 4-4
Software
License
Restricted
Unrestricted 64 MB
Failover
Cisco PIX Security Appliance Hardware Installation Guide
4-16
lists the minimum memory requirements for the various software versions and licenses.
PIX 515/515E Minimum Memory Requirements
Software Version 6.3
and Previous Releases
32 MB
64 MB
Software Version 7.0 and
Later Releases
64 MB
128 MB
128 MB
Chapter 4
PIX 515/515E
78-15170-03
Hide quick links:
Advertisement
Table of Contents
