Cisco ASR 9000 Series User Configuration Manual page 179
Aggregation services router
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Upgrading FPD
DETAILED STEPS
Command or Action
Step 1
show hw-module fpd location {all |
node-id}
Example:
RP/0/RSP0/CPU0:router# show
hw-module fpd location all
or
RP/0/RSP0/CPU0:router# show
hw-module fpd location 0/4/cpu0
Step 2
admin
Example:
RP/0/RSP0/CPU0:router# admin
Step 3
show fpd package
Example:
RP/0/RSP0/CPU0:router(admin)# show
fpd package
Step 4
upgrade hw-module fpd {all | fpga-type}
[ force] location [all | node-id]
Example:
RP/0/RSP0/CPU0:router(admin)#
upgrade hw-module fpd
all location 0/3/1
.
.
.
Successfully upgraded 1 FPD for
SPA-2XOC48POS/RPR
on location 0/3/1
Purpose
Displays the current FPD image versions for the specified card or all cards
installed in the router. Use this command to determine if you must upgrade the
FPD image on your card.
Enters administration EXEC mode.
(Optional)
Displays which cards are supported with your current Cisco IOS XR software
release, which FPD image you need for each card, and what the minimum
hardware requirements are for the various modules. (A minimum hardware
requirement version of 0.0 indicates that all hardware can support this FPD
image version.)
If there are multiple FPD images for your card, use this command to determine
which FPD image to use if you want to upgrade only a specific FPD type.
Upgrades all the current FPD images that must be upgraded on the specified
card with new images.
Before continuing to the next step, wait for confirmation that the FPD upgrade
has successfully completed. Status messages, similar to these, are displayed to
the screen until the FPD upgrade is completed:
FPD upgrade started.
FPD upgrade in progress..
FPD upgrade in progress..
FPD upgrade sent to location xxxx
FPD upgrade sent to location yyyy
FPD upgrade in progress..
FPD upgrade finished for location xxx
FPD upgrade in progress..
FPD upgrade finished for location yyyy
FPD upgrade completed.
The "FPD upgrade in progress." message is printed every minute. These logs
are information logs, and as such, are displayed if the logging console
informational command is configured.
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
How to Upgrade FPD Images
161
Advertisement
Table of Contents
Troubleshooting
