Compliance And Safety Information; Laser Safety; Energy Hazard; Preventing Electrostatic Discharge Damage - Cisco ASR 9901 Manual
Hide thumbs
Also See for ASR 9901:
- Hardware installation manual (158 pages) ,
- Installation manual (284 pages)
Table of Contents
Advertisement
Compliance and Safety Information
• Operate Cisco equipment safely by using it in accordance with its electrical ratings and product usage
• Do not work alone if potentially hazardous conditions exist.
• Always unplug power cables when performing maintenance or working on the router, unless the
• Ensure that the installation of the router is in compliance with national and local electrical codes: in the
Compliance and Safety Information
The Cisco ASR 9901, ASR 9001, and ASR 9901-S Routers are designed to meet the regulatory compliance
and safety approval requirements. See the
9000 Series
Laser Safety
The fixed-configuration ports on the Cisco ASR 9901 and the line card ports on the Cisco ASR 9001 Router
are equipped with lasers. The lasers emit invisible radiation. Do not stare into open ports. Observe this warning
to prevent eye injury:
Warning
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or
view directly with optical instruments. Statement 1051
Energy Hazard
The Cisco ASR 9901 and Cisco ASR 9001 Router can be configured for a DC power source. Do not touch
terminals while they are live. Observe this warning to prevent injury.
Warning
Hazardous voltage or energy may be present on power terminals. Always replace cover when terminals are
not in service. Be sure uninsulated conductors are not accessible when cover is in place. Statement 1086
Preventing Electrostatic Discharge Damage
Many router components can be damaged by static electricity. Not exercising the proper electrostatic discharge
(ESD) precautions can result in intermittent or complete component failures. To minimize the potential for
ESD damage, always use an ESD-preventive antistatic wrist strap (or ankle strap) and ensure that it makes
good skin contact.
Note
Check the resistance value of the ESD-preventive strap periodically. The measurement should be between 1
and 10 megohms.
Preparing for Installation
4
instructions.
replacement part is hot swappable and designed for online insertion and removal (OIR).
United States, National Fire Protection Association (NFPA) 70, United States National Electrical Code;
in Canada, Canadian Electrical Code, part I, CSA C22.1; in other countries, International Electrotechnical
Commission (IEC) 364, part 1 through part 7.
Routers.
Regulatory Compliance and Safety Information for Cisco ASR
Preparing for Installation
Hide quick links:
Advertisement
Table of Contents
