Show Platform Ipv6 Unicast - Cisco Catalyst 3560-X Command Reference Manual
Hide thumbs
Also See for Catalyst 3560-X:
- Software configuration manual (1538 pages) ,
- Command reference manual (1244 pages) ,
- Manual (276 pages)
Table of Contents
Advertisement
show platform ipv6 unicast
show platform ipv6 unicast
Note
Syntax Description
Catalyst 3750-X and 3560-X Switch Command Reference
C-20
Downloaded from
www.Manualslib.com
Use the show platform ipv6 unicast privileged EXEC command to display platform-dependent IPv6
unicast routing information. This command is available only if the switch or switch stack is running the
IP services feature set.
show platform ipv6 unicast {adjacency [ipv6-prefix] | backwalk {adjacency | loadbalance} |
compress ipv6-prefix/prefix length | interface | loadbalance | mpath | retry {adjacency |
route} | route [ipv6-prefix/prefix length | tcam] [detail] | statistics | table [detail] | trace}
[| {begin | exclude | include} expression]
This command is not supported on switches running the LAN base feature set.
adjacency
Display IPv6 adjacency information for the switch or for the specified IPv6
network.
ipv6-prefix
(Optional) The IPv6 network to be displayed. This argument must be in the
form documented in RFC 2373 where the address is specified in hexadecimal
using 16-bit values between colons.
backwalk {adjacency
Display IPv6 backwalk information.
| loadbalance}
•
•
compress
Display IPv6 prefix compression information.
ipv6-prefix/prefix
•
length
•
interface
Display IPv6 interface information.
loadbalance
Display IPv6 load-balance information
mpath
Display IPv6 multipath information
retry {adjacency |
Display IPv6 retry information.
route}
•
•
route
Display IPv6 route information.
tcam
(Optional) Display the IPv6 hardware route table information.
detail
(Optional) Display detailed IPv6 route information.
statistics
Display IPv6 accumulated statistics.
table
Display IPv6 unicast table information.
trace
Display IPv6 unicast traces.
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
manuals search engine
Appendix C
adjacency—Display adjacency backwalk information.
loadbalance—Display backwalk load-balance information.
ipv6-prefix—The IPv6 network.
/prefix length—The length of the IPv6 network prefix. A decimal value
from 0 to 128 that shows how many of the high-order contiguous bits of
the address comprise the prefix (the network portion of the address). A
slash mark must precede the decimal value.
adjacency—Display IPv6 adjacency retry information.
route—Display IPv6 route retry information.
Catalyst 3750-X and 3560-X Show Platform Commands
OL-21522-02
Advertisement
Table of Contents
