Debug Matm - Cisco Catalyst 3560-X Command Reference Manual
Hide thumbs
Also See for Catalyst 3560-X:
- Software configuration manual (1538 pages) ,
- Command reference manual (1244 pages) ,
- Manual (276 pages)
Table of Contents
Advertisement
debug matm
debug matm
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
B-26
Downloaded from
www.Manualslib.com
Use the debug matm privileged EXEC command to enable debugging of platform-independent MAC
address management. Use the no form of this command to disable debugging.
debug matm
no debug matm
This command has no arguments or keywords.
Debugging is disabled.
Privileged EXEC
Release
Modification
12.2(53)SE2
This command was introduced.
The undebug matm command is the same as the no debug matm command.
When you enable debugging on a switch stack, it is enabled only on the stack master. To enable
debugging on a stack member, you can start a session from the stack master by using the session
switch-number privileged EXEC command. Then enter the debug command at the command-line
prompt of the stack member. You also can use the remote command stack-member-number LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
Command
Description
debug platform matm
Displays information about platform-dependent MAC address management.
show debugging
Displays information about the types of debugging that are enabled.
manuals search engine
Appendix B
Catalyst 3750-X and 3560-X Switch Debug Commands
OL-21522-02
Advertisement
Table of Contents
