Table of Contents
Advertisement
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Yamaha TT-R TT250RN
Summary of Contents for Yamaha TT-R TT250RN
- Page 1 OWNER’S MANUAL TT250R(N) 4PX-28199-26...
- Page 2 EAU00000 INTRODUCTION Congratulations on your purchase of the Yamaha TT250R. This model is the result of Yamaha’s vast experience in the production of fine sporting, touring, and pacesetting racing machines. It represents the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields.
-
Page 3: Important Manual Information
8 This manual should be considered a permanent part of this motorcycle and should remain with it even if the motorcycle is subsequently sold. 8 Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most current product information available at the time of printing, there may be minor discrepancies between your motorcycle and this manual. - Page 4 IMPORTANT MANUAL INFORMATION EW000002 PLEASE READ THIS MANUAL CAREFULLY AND COMPLETELY BEFORE OPERATING THIS MOTORCYCLE.
- Page 5 EAU03337 TT250R(N) OWNER’S MANUAL ©2000 by Yamaha Motor Co., Ltd. 1st Edition, June 2000 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Co., Ltd. is expressly prohibited. Printed in Japan.
-
Page 6: Table Of Contents
EAU00009 TABLE OF CONTENTS SAFETY INFORMATION........1-1 Fuel cock............3-6 Safe riding............1-1 Starter (choke) knob “1” ........3-7 Protective apparel ..........1-3 Kickstarter ............3-7 Modifications ............1-3 Steering lock ............3-8 Loading and accessories ........1-3 Seat ..............3-8 Gasoline and exhaust gas .........1-5 Helmet holder.............3-9 Location of the important labels ......1-7 Adjusting the front fork ........3-9 Adjusting the rear shock absorber assembly ...3-11 DESCRIPTION ............2-1... - Page 7 TABLE OF CONTENTS Periodic maintenance and lubrication chart ..6-2 Checking and lubricating the sidestand ...6-25 Removing and installing the cowling and Checking the front fork........6-26 panels ..............6-5 Checking the steering ........6-26 Checking the spark plug ........6-6 Checking the wheel bearing ......6-27 Engine oil and oil filter element ......6-8 Battery..............6-27 Cleaning the air filter element ......6-11...
- Page 8 TABLE OF CONTENTS Vehicle identification number ......9-1 Model label............9-2 Noise regulation (For Australia) ......9-2...
-
Page 9: Safety Information
EAU00017 Q SAFETY INFORMATION MOTORCYCLES ARE SINGLE TRACK VEHICLES. THEIR SAFE USE AND OPERATION ARE DEPENDENT UPON THE USE OF PROPER RIDING TECHNIQUES AS WELL AS THE EXPER- TISE OF THE OPERATOR. EVERY OPERATOR SHOULD KNOW THE FOLLOWING REQUIRE- MENTS BEFORE RIDING THIS MOTORCYCLE. HE OR SHE SHOULD: 1. - Page 10 Q SAFETY INFORMATION 4. Many accidents involve inexperienced operators. In fact, many operators who have been involved in accidents do not even have a current motorcycle license. a. Make sure that you are qualified and that you only lend your motorcycle to other qualified oper- ators.
-
Page 11: Protective Apparel
6. Passengers should also observe the precautions mentioned above. Modifications Modifications made to this motorcycle not approved by Yamaha, or the removal of original equipment, may render the motorcycle unsafe for use and may cause severe personal injury. Modifications may also make your motorcycle illegal to use. - Page 12 Genuine Yamaha accessories have been specifically designed for use on this motorcycle. Since Yamaha cannot test all other accessories that may be available, you must personally be responsible for the proper selection, installation and use of non-Yamaha accessories. Use extreme caution when selecting and installing any accessories.
-
Page 13: Gasoline And Exhaust Gas
Q SAFETY INFORMATION 1. Never install accessories or carry cargo that would impair the performance of your motorcycle. Carefully inspect the accessory before using it to make sure that it does not in any way reduce ground clearance or cornering clearance, limit suspension travel, steering travel or control opera- tion, or obscure lights or reflectors. - Page 14 Q SAFETY INFORMATION 2. Never start the engine or let it run for any length of time in a closed area. The exhaust fumes are poisonous and may cause loss of consciousness and death within a short time. Always operate your motorcycle in an area that has adequate ventilation.
-
Page 15: Location Of The Important Labels
EAU02977 Q SAFETY INFORMATION Location of important labels Please read the following important labels carefully before operating this motorcycle. - Page 16 Q SAFETY INFORMATION WARNING Before you operate this vehicle, read the owner’s manual. 3HP-21568-00 English 4AA-22259-40...
-
Page 17: Description
EAU00026 DESCRIPTION Left view 1. Headlight (page 6-30) 6. Helmet holder (page 3-9) 2. Fuel cock (page 3-6) 7. Shift pedal (page 3-4) 3. Starter (choke) knob (page 3-7) 8. Front fork compression damping 4. Air filter element (page 6-11) adjusting screw (page 3-11) 5. -
Page 18: Right View
DESCRIPTION Right view 10 11 12 13 9. Battery (page 6-27) 15. Steering lock (page 3-8) 10. Fuse (page 6-29) 16. Engine oil filter element (page 6-10) 11. Kickstarter (page 3-7) 17. Brake pedal (page 3-4, 6-18) 12. Rear shock absorber compression 18. -
Page 19: Controls And Instruments
DESCRIPTION Controls and instruments 1. Clutch lever (page 3-3) 6. Throttle grip (page 6-13) 2. Left handlebar switches (page 3-2) 7. Fuel tank cap (page 3-5) 3. Speedometer unit (page 3-2) 4. Right handlebar switches (page 3-3) 5. Brake lever (page 3-4) -
Page 20: Instrument And Control Functions
EAU00027 INSTRUMENT AND CONTROL FUNCTIONS EAU00038 All electrical systems are off. The key can be removed. 1. Turn signal indicator light “5” 2. High beam indicator light “&” EAU00028 3. Neutral indicator light “N” Main switch EAU00056 The main switch controls the ignition Indicator lights and lighting systems. -
Page 21: Speedometer Unit
INSTRUMENT AND CONTROL FUNCTIONS EAU00127 Turn signal switch To signal a right-hand turn, push this switch to “6”. To signal a left-hand turn, push this switch to “4”. When released, the switch returns to the center position. To cancel the turn signal lights, push the switch in after it has returned to the center position. -
Page 22: Clutch Lever
INSTRUMENT AND CONTROL FUNCTIONS EC000005 See page 5-1 for starting instruc- tions prior to starting the engine. 1. Engine stop switch 1. Clutch lever 2. Start switch “START” EAU00152 Clutch lever EAU00138 Engine stop switch The clutch lever is located at the left Set this switch to “$”... -
Page 23: Shift Pedal
INSTRUMENT AND CONTROL FUNCTIONS 1. Shift pedal 1. Brake lever 1. Brake pedal N. Neutral EAU00158 EAU00162 Brake lever Brake pedal EAU00157 Shift pedal The brake lever is located at the right The brake pedal is on the right side The shift pedal is located on the left handlebar grip. -
Page 24: Fuel Tank Cap
INSTRUMENT AND CONTROL FUNCTIONS EAU00185 Immediately wipe off spilled fuel with a clean, dry, soft cloth, since fuel may deteriorate painted sur- faces or plastic parts. EAU00192 Recommended fuel: 1. Fuel tank cap 1. Filler tube a. Open. 2. Fuel level Regular gasoline EAU01183 EAU00179... -
Page 25: Fuel
INSTRUMENT AND CONTROL FUNCTIONS OFF: Closed position ON: Normal position FUEL FUEL 1. Fuel tank breather hose 1. Arrow mark positioned over “OFF” 1. Arrow mark positioned over “ON” EAU02955 EAU03050 Fuel cock Fuel tank breather hose With the lever in this position, fuel The fuel cock supplies fuel from the Before operating the motorcycle: flows to the carburetor. -
Page 26: Starter (Choke) Knob "1
INSTRUMENT AND CONTROL FUNCTIONS RES: Reserve position FUEL 1. Arrow mark positioned over “RES” 1. Starter (choke) knob “1” 1. Kickstarter EAU03032 EAU00212 Starter (choke) knob “1” Kickstarter This indicates reserve. If you run out Starting a cold engine requires a rich- To start the engine, fold out the kick- of fuel while riding, move the lever to er air-fuel mixture, which is supplied... -
Page 27: Steering Lock
INSTRUMENT AND CONTROL FUNCTIONS 1. Steering lock 1. Bolt (×2) 1. Projection (×2) 2. Seat holder (×2) EAU00220 EAU00240 To install the seat Steering lock Seat 1. Insert the projections on the front To lock the steering To remove the seat of the seat into the seat holders 1. -
Page 28: Helmet Holder
NOTE: the original position, and then remove An optional air pressure gauge is the key. NOTE: available at a Yamaha dealer. EW000030 When checking and adjusting the air pressure, there should be no weight Never ride with a helmet attached on the front end of the motorcycle. - Page 29 INSTRUMENT AND CONTROL FUNCTIONS EW000035 4. To increase the spring rate and thereby harden the suspension, Always adjust both fork legs increase the air pressure with an equally, otherwise poor handling air pump or compressed air. To and loss of stability may result. decrease the spring rate and thereby soften the suspension, 5.
-
Page 30: Adjusting The Rear Shock Absorber Assembly
1. Spring preload adjustment 3. Securely install the rubber caps. should be left to a Yamaha deal- ECA00034 1. Compression damping adjusting screw Be sure to install the rubber caps 2. To increase the damping force to prevent dust, etc. - Page 31 Never attempt to turn the adjuster Never attempt to turn the adjuster 8 Always have a Yamaha dealer beyond the maximum or minimum beyond the maximum or minimum service the shock absorber.
-
Page 32: Sidestand
Therefore, check this system 8 It cuts the running engine when regularly as described below and the sidestand is moved down. have a Yamaha dealer repair it if it Periodically check the operation of does not function properly. the ignition circuit cut-off system according to the following procedure. - Page 33 5. Push the start switch. Does the engine start? The neutral switch may be defective. The motorcycle should not be ridden until checked by a Yamaha dealer. With the engine still running: 6. Move the sidestand up. 7. Keep the clutch lever pulled.
-
Page 34: Pre-Operation Checks
EAU01114 PRE-OPERATION CHECKS The condition of a vehicle is the owner’s responsibility. Vital components can start to deteriorate quickly and unexpect- edly, even if the vehicle remains unused (for example, as a result of exposure to the elements). Any damage, fluid leak- age or loss of tire air pressure could have serious consequences. - Page 35 PRE-OPERATION CHECKS ITEM CHECKS PAGE 9 Check fuel level. Fuel tank 3-5–3-6 9 Add fuel if necessary. Lights, signals and 9 Check proper operation. 3-1–3-3, 6-30–6-33 switches NOTE: Pre-operation checks should be made each time the motorcycle is used. Such an inspection can be accomplished in a very short time;...
-
Page 36: Operation And Important Riding Points
If the should be on, otherwise have a sidestand is not raised com- Yamaha dealer check the electrical pletely, it could contact the circuit. ground and distract the opera- tor, resulting in a possible loss of control. -
Page 37: Starting A Warm Engine
OPERATION AND IMPORTANT RIDING POINTS ECA00055 EAU01258 4. Turn the starter (choke) on and Starting a warm engine completely close the throttle. Follow the same procedure as for For maximum engine life, always (See page 3-7 for starter (choke) starting a cold engine with the excep- warm the engine up before starting operation.) tion that the starter (choke) is not... -
Page 38: Shifting
OPERATION AND IMPORTANT RIDING POINTS EC000048 EAU00424 Tips for reducing fuel consumption 8 Even with the transmission in Fuel consumption depends largely on the neutral position, do not your riding style. Consider the follow- coast for long periods of time ing tips to reduce fuel consumption: with the engine off, and do not 8 Thoroughly warm up the engine. -
Page 39: Engine Break-In
1/2 throttle. that might result in engine overheat- immediately have a Yamaha dealer 8 Rev the engine freely through ing must be avoided. check the vehicle. the gears, but do not use full throttle at any time. -
Page 40: Parking
OPERATION AND IMPORTANT RIDING POINTS FUEL 1. Arrow mark positioned over “OFF” EAU00457 Parking When parking, stop the engine, remove the key from the main switch, and then turn the fuel cock lever to “OFF”. EW000058 8 Since the engine and exhaust system can become very hot, park in a place where pedestri- ans or children are not likely... -
Page 41: Periodic Maintenance And Minor Repair
If you do not have the tools or experi- Periodic inspection, adjustment and ence required for a particular job, lubrication will keep your vehicle in have a Yamaha dealer perform it for the safest and most efficient condi- you. tion possible. The most important... -
Page 42: Periodic Maintenance And Lubrication Chart
8 The annual checks must be performed every year, except if a kilometer-based maintenance is performed instead. 8 From 50,000 km, repeat the maintenance intervals starting from 10,000 km. 8 Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills. - Page 43 PERIODIC MAINTENANCE AND MINOR REPAIR ODOMETER READING (×1,000 km) ANNUAL ITEM CHECK OR MAINTENANCE JOB CHECK • Check runout, spoke tightness and for damage. √ √ √ √ Wheels • Tighten spokes if necessary. • Check tread depth and for damage. •...
- Page 44 PERIODIC MAINTENANCE AND MINOR REPAIR ODOMETER READING (×1,000 km) ANNUAL ITEM CHECK OR MAINTENANCE JOB CHECK Front and rear brake √ √ √ √ √ √ • Check operation. switches √ √ √ √ √ Moving parts and cables • Lubricate. Lights, signals and •...
-
Page 45: Removing And Installing The Cowling And Panels
PERIODIC MAINTENANCE AND MINOR REPAIR 1. Cowling A 1. Panel B 1. Screw 2. Panel A EAU01145 EAU03516 Cowling A Removing and installing the To remove the cowling cowling and panels Remove the screw, and then pull the The cowling and panels shown above cowling off as shown. -
Page 46: Checking The Spark Plug
PERIODIC MAINTENANCE AND MINOR REPAIR 1. Screw 1. Screw 1. Spark plug cap EAU00488 EAU00488 EAU01833 Panel A Panel B Checking the spark plug To remove the panel To remove the panel The spark plug is an important Remove the screw, and then pull the Remove the screw, and then pull the engine component, which is easy to panel off as shown. - Page 47 Instead, shown, with the spark plug 1. Measure the spark plug gap with have a Yamaha dealer check the wrench included in the owner’s a wire thickness gauge and, if motorcycle. tool kit. necessary, adjust the gap to specification.
-
Page 48: Engine Oil And Oil Filter Element
PERIODIC MAINTENANCE AND MINOR REPAIR NOTE: Tightening torque: Make sure that the motorcycle is Spark plug: positioned straight up when checking 13 Nm (1.3 m0kg) the oil level. A slight tilt to the side NOTE: can result in a false reading. If a torque wrench is not available when installing a spark plug, a good 2. - Page 49 PERIODIC MAINTENANCE AND MINOR REPAIR 1. Engine oil filler bolt 1. Engine oil drain bolt 1. Oil filter element drain bolt 2. Oil filter element cover bolt (×2) To change the engine oil (with or Check the washer for damage and 3.
- Page 50 PERIODIC MAINTENANCE AND MINOR REPAIR 12. Add the specified amount of the Tightening torque: recommended engine oil, and Oil filter element cover bolt: then install and tighten the oil 10 Nm filler bolt. (1.0 m0kg, 7.2 ft0lb) Recommended engine oil: 10.
-
Page 51: Cleaning The Air Filter Element
If this occurs, have a procedures.) Yamaha dealer repair the vehi- 2. Remove the air filter case cover cle. by removing the holding clips. 8 After checking the oil pres- sure, tighten the bleed bolt to the specified torque. - Page 52 PERIODIC MAINTENANCE AND MINOR REPAIR 7. Install the sponge material onto the frame, insert the air filter ele- ment into the air filter case, and then install the air filter case cover by installing the holding clips. EC000082 8 Make sure that the air filter ele- 1.
-
Page 53: Adjusting The Carburetor
The engine idling speed must be cated adjustment. Therefore, most checked and, if necessary, adjusted carburetor adjustments should be left as follows at the intervals specified in to a Yamaha dealer, who has the the periodic maintenance and lubrica- necessary professional knowledge tion chart. experience. -
Page 54: Adjusting The Throttle Cable Free Play
To prevent regarding the specified tires. this from occurring, the valve clear- ance must be adjusted by a Yamaha Tire air pressure dealer at the intervals specified in the The tire air pressure should be... - Page 55 Because loading has an enormous air pressure before each ride. fragments in it, or if the sidewall is impact on the handling, braking, cracked, have a Yamaha dealer performance and safety character- replace the tire immediately. istics of your motorcycle, you...
- Page 56 PERIODIC MAINTENANCE AND MINOR REPAIR Tire information EW000079 EAU00680 This motorcycle is equipped with tube 8 Have a Yamaha dealer replace 8 It is dangerous to ride with a tires. excessively worn tires. worn-out tire. When a tire EW000078 Besides being illegal, operat-...
-
Page 57: Spoke Wheels
5. Loosen the locknut further down 2. Adjusting bolt each ride. If any damage is the clutch cable. 3. Locknut (Clutch cable) found, have a Yamaha dealer 4. Adjusting nut 6. To increase the clutch lever free c. Free play replace wheel. -
Page 58: Adjusting The Brake Lever Free Play
Yamaha dealer adjust it. as follows. 1. Loosen the locknut at the brake lever. 2. To increase the brake lever free play, turn the adjusting bolt in direction a. -
Page 59: Adjusting The Brake Light Switch
If there is air in the hydraulic sys- and lubrication chart. tem, have a Yamaha dealer bleed the system before operating the motorcycle. Air in the hydraulic 1. Brake light switch system will diminish the braking 2. -
Page 60: Checking The Brake Fluid Level
Yamaha dealer disappeared, have a Yamaha dealer brake pads and/or brake system replace the brake pads as a set. -
Page 61: Changing The Brake Fluid
EAU03073 REAR Changing the brake fluid fluid. Mixing fluids may result in a Have a Yamaha dealer change the harmful chemical reaction and brake fluid at the intervals specified in lead to poor braking perfor- the periodic maintenance and lubrica- mance. -
Page 62: Drive Chain Slack
PERIODIC MAINTENANCE AND MINOR REPAIR EAU00744 Drive chain slack The drive chain slack should be checked before each ride and adjust- ed if necessary. To check the drive chain slack 1. Place the motorcycle on a level surface and hold it in an upright position. -
Page 63: Lubricating The Drive Chain
PERIODIC MAINTENANCE AND MINOR REPAIR EAU03006 NOTE: Lubricating the drive chain Make sure that both adjusting plates The drive chain must be cleaned and are in the same position for proper lubricated at the intervals specified in wheel alignment. the periodic maintenance and lubrica- tion chart, otherwise it will quickly EC000096 wear out, especially when riding in... -
Page 64: Checking And Lubricating The Cables
If a cable is damaged or does not move smoothly, have a Yamaha dealer check or replace it. Recommended lubricant: Engine oil 6-24... -
Page 65: Checking And Lubricating The Brake And Shift Pedals
Recommended lubricant: Recommended lubricant: EW000113 Lithium-soap-based grease Lithium-soap-based grease (all-purpose grease) (all-purpose grease) If the sidestand does not move up down smoothly, have Yamaha dealer check or repair it. Recommended lubricant: Lithium-soap-based grease (all-purpose grease) 6-25... -
Page 66: Checking The Front Fork
If any damage is found or the front so that there is no danger of it fork does not operate smoothly, falling over. have a Yamaha dealer check or repair it. Check the inner tubes for scratches, damage and excessive oil leakage. -
Page 67: Checking The Wheel Bearing
If there is play in the wheel hub or if the wheel does not turn smoothly, have a Yamaha dealer check the wheel bearings. 1. Battery EAU00800 2. - Page 68 To charge the battery severe burns. Avoid any con- place. Have a Yamaha dealer charge the tact with skin, eyes or clothing 2. If the battery will be stored for battery as soon as possible if it...
-
Page 69: Replacing The Fuse
EAU01307 the battery. If you do not have Replacing the fuse 4. If the fuse immediately blows access to a sealed-type (MF) again, have a Yamaha dealer The fuse holder is located behind battery charger, have check the electrical system. -
Page 70: Replacing The Headlight Bulb
PERIODIC MAINTENANCE AND MINOR REPAIR 1. Bolt (×3) 1. Bulb holder a. Don’t touch this area. EAU01235 EW000119 EC000105 Replacing the headlight bulb This motorcycle is equipped with a Headlight bulbs get very hot. Do not touch the glass part of the quartz bulb headlight. -
Page 71: Replacing A Turn Signal Light Bulb
PERIODIC MAINTENANCE AND MINOR REPAIR 7. Install the headlight unit by installing the bolts. 8. Install the cowling. 9. Have a Yamaha dealer adjust the headlight beam if necessary. 1. Screw 1. Bulb 2. Lens 3. Insert a new bulb into the socket,... -
Page 72: Replacing The Tali/Brake Light Bulb
PERIODIC MAINTENANCE AND MINOR REPAIR 1. Screw (×2) 1. Bulb 1. Nut (×2) 2. Lens EAU01624 2. Remove the defective bulb by EAU01623 Replacing the license plate Replacing the tail/brake light pushing it in and turning it coun- light bulb bulb terclockwise. -
Page 73: Supporting The Motorcycle
PERIODIC MAINTENANCE AND MINOR REPAIR EAU01579 Supporting the motorcycle Since this model is not equipped with a centerstand, follow these precau- tions when removing the front and rear wheel or performing other main- tenance requiring the motorcycle to stand upright. Check that the motor- cycle is in a stable and level position before starting any maintenance. -
Page 74: Front Wheel
3. Wheel axle EAU00897 Front wheel To remove the front wheel EW000122 8 It is advisable to have a Yamaha dealer service the wheel. 8 Securely support the motorcy- cle so that there is no danger of it falling over. 1. Disconnect speedometer cable from the front wheel. - Page 75 PERIODIC MAINTENANCE AND MINOR REPAIR 1. Speedometer gear unit 1. Retainer 1. Wheel axle a. Gap EAU03555 NOTE: 6. Tighten the axle holder nuts to To install the front wheel Make sure that there is enough space the specified tightening torque. 1.
-
Page 76: Rear Wheel
8 It is advisable to have a NOTE: Yamaha dealer service the The drive chain does not need to be wheel. disassembled in order to remove and 8 Securely support the motorcy- install the wheel. -
Page 77: Troubleshooting
Use only genuine Yamaha replace- slack adjustment procedures.) ment parts. Imitation parts may look 4. Tighten the axle nut to the speci- like Yamaha parts, but they are often fied torque, and then install the inferior, have a shorter service life cotter pin. -
Page 78: Troubleshooting Chart
2. Compression There is compression. Go to ignition check. Use electric starter. No compression. Ask a Yamaha dealer to inspect. 3. Ignition Wipe clean with dry cloth and Open the throttle half-way and start Remove spark adjust plug gap or replace plug. -
Page 79: Motorcycle Care And Storage
EAU03521 MOTORCYCLE CARE AND STORAGE Care Before cleaning Cleaning 1. Cover the muffler outlet with a ECA00010 While the open design of a motorcy- plastic bag after the engine has cle reveals the attractiveness of the 8 Avoid using strong acidic cooled down. - Page 80 MOTORCYCLE CARE AND STORAGE 8 Do not use any harsh chemical 8 For motorcycles equipped After riding in the rain, near the sea products on plastic parts. Be with a windshield: Do not use or on salt-sprayed roads sure to avoid using cloths or strong cleaners hard...
- Page 81 4. To prevent corrosion, it is recom- ior. NOTE: mended to apply a corrosion pro- Consult a Yamaha dealer for advice on what products to use. tection spray on all metal, includ- ing chrome- and nickel-plated, surfaces.
-
Page 82: Storage
MOTORCYCLE CARE AND STORAGE Storage Long-term a. Remove the spark plug cap and Before storing your motorcycle for Short-term spark plug. several months: Always store your motorcycle in a b. Pour a teaspoonful of engine oil 1. Follow all the instructions in the cool, dry place and, if necessary, pro- into the spark plug bore. - Page 83 MOTORCYCLE CARE AND STORAGE 6. Lubricate all control cables and 9. Remove the battery and fully the pivoting points of all levers charge it. Store it in a cool, dry and pedals as well as of the place and charge it once a sidestand/centerstand.
-
Page 84: Specifications
EAU01038 SPECIFICATIONS Specifications Model TT250R(N) Engine oil Dimensions Type –20° –10° 0° 10° 20° 30° 40° 50°C Overall length 2,195 mm Overall width 835 mm SAE 10W/30 Overall height 1,255 mm SAE 10W/40 Seat height 910 mm SAE 15W/40 Wheel base 1,410 mm SAE 20W/40 Ground clearance... - Page 85 SPECIFICATIONS Fuel Gear ratio 2.467 Type Regular gasoline 1.813 (except for Australia) 1.364 Unleaded fuel only (for Australia) 1.080 Fuel tank capacity 10.0 L 0.889 Reserve amount 2.0 L 0.759 Carburetor Chassis Manufacturer TEIKEI Frame type Semi double cradle Model×quantity Y30P×1 Caster angle 26°...
- Page 86 SPECIFICATIONS Maximum load* 180 kg Brakes Air pressure (cold tire) Front up to 90 kg load* Type Single disc brake Front 125 kPa (1.25 kgf/cm , 1.25 bar) Operation Right hand operation Rear 150 kPa (1.50 kgf/cm , 1.50 bar) Fluid DOT 4 90 kg load–Maximum...
- Page 87 SPECIFICATIONS Electrical Ignition system C.D.I Charging system Type A.C. magneto Standard output 14 V, 13.5A @5,000 r/min Battery Type GT7B-4 Voltage, capacity 12 V, 6.5 AH Headlight type Halogen bulb Bulb voltage, wattage × quantity 12 V, 60/55W × 1 Headlight 12 V, 5/21W ×...
-
Page 88: Conversion Table
SPECIFICATIONS EAU01064 Conversion table CONVERSION TABLE All specification data in this manual are listed in SI and METRIC TO IMPERIAL METRIC UNITS. Metric unit Multiplier Imperial unit m•kg 7.233 ft•lb Use this table to convert METRIC unit data to Torque m•kg 86.794 in•lb... -
Page 89: Consumer Information
Record the key identification number, vehicle identification number and model label information in the spaces provided below for assistance when ordering spare parts from a Yamaha dealer or for reference in case the vehicle is stolen. 1. KEY IDENTIFICATION 1. Key identification number 1. -
Page 90: Model Label
This is in use; and information will be needed when (b) The use of the vehicle after such ordering spare parts from a Yamaha device or element of design has dealer. been removed or rendered inop-... - Page 94 YAMAHA MOTOR CO., LTD. PRINTED ON RECYCLED PAPER PRINTED IN JAPAN 2000·7– 0.6×1(E)