Cisco Unified Ip Phone 8961, 9951, And 9971 Administration Guide For Cisco Unified Communications Manager - Cisco 9971 Administration Manual
Unified ip phone 8961, 9951, and 9971 administration guide for cisco unified communications manager 10.0
Hide thumbs
Also See for 9971:
- Deployment manual (104 pages) ,
- User manual (42 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
Non-Lockable Wall Mount Components for Phone
Procedure
Step 1
Mount the wall bracket in the desired location. You can install the bracket over an Ethernet jack, or you can
run the Ethernet network cable to a nearby jack.
Note
If the jack is to be placed behind the phone, the Ethernet jack must be flush to the wall or recessed.
a) Hold the bracket on the wall, placing it so that the arrow on the back of the bracket is pointing up.
b) Use the level to ensure that the bracket is level and use a pencil to mark the screw holes.
c) Using a #2 Phillips-head screwdriver, carefully center the anchor over the pencil mark and press the anchor
into the wall.
d) Screw the anchor clockwise into the wall until it is seated flush.
e) Use the included screws and a #2 Phillips-head screwdriver to attach the bracket to the wall.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
139
- Quick Links:
- Cisco Unified Ip Phone 9900 Series...
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
