Table of Contents
Advertisement
Chapter 3
Installing the Cisco CVA122/CVA122E Cable Voice Adapter
Figure 3-2
Step 4
Place the cable voice adapter and stand on any stable, hard surface, using the following guidelines:
•
•
•
•
Wall Mounting the Cisco CVA122/CVA122E Cable Voice Adapter
To mount the Cisco CVA122/CVA122E Cable Voice Adapter on a cement, wood, or drywall, do the
following:
OL-0799-02 (05/2001)
Cisco CVA122/CVA122E Cable Voice Adapter (Side Mounted)
Close to the cable TV drop connection and all devices to be connected at the subscriber site.
Install the cable voice adapter in compliance with all national and local electrical codes such as:
US NFPA 70
–
Canadian Electrical Code, part I, CC22.1
–
IEC 364, part 1 through part 7
–
The top and sides of the cable voice adapter must remain unobstructed to ensure adequate airflow
and to prevent the unit from overheating.
The cable voice adapter should have at least 3 inches of clearance at the rear to allow sufficient
space for the connected cables without crimping.
Cisco CVA122/CVA122E Hardware Installation Guide
Physical Placement
3-7
Advertisement
Table of Contents
Troubleshooting
