hit counter script

Retrieving The Unique Device Identifier - Cisco cBR Series Configuration Manual

Converged broadband routers application - voice and video configuration guide
Hide thumbs Also See for cBR Series:
Table of Contents

Advertisement

Unique Device Identifier Retrieval
• Automates Cisco product inventory (capital and asset management).
• Provides a mechanism to determine the entitlement level of a Cisco product for repair and replacement
Product Item Descriptor for Cable Products
For information on the Product Item Descriptor (PID), see the product hardware installation guide available
on Cisco.com.

Retrieving the Unique Device Identifier

To use UDI retrieval, the Cisco product in use must be UDI-enabled. A UDI-enabled Cisco product supports
five required Entity MIB objects. The five Entity MIB v2 (RFC-2737) objects are:
• entPhysicalName
• entPhysicalDescr
• entPhysicalModelName
• entPhysicalHardwareRev
• entPhysicalSerialNum
Although the show inventory command may be available, using that command on devices that are not
UDI-enabled will likely produce no output.
Enter the show inventory command to retrieve and display information about all of the Cisco products installed
in the networking device that are assigned a PID, VID, and SN. If a Cisco entity is not assigned a PID, that
entity is not retrieved or displayed.
Router# show inventory
NAME: "Chassis", DESCR: "Cisco cBR-8 CCAP Chassis"
PID: CBR-8-CCAP-CHASS
NAME: "clc 3", DESCR: "Cisco cBR CCAP Line Card"
PID: CBR-CCAP-LC-40G
NAME: "Cable PHY Module", DESCR: "CLC Downstream PHY Module 3/0"
PID: CBR-D30-DS-MOD
NAME: "Cable PHY Module", DESCR: "CLC Downstream PHY Module 3/1"
PID: CBR-D30-DS-MOD
NAME: "Cable PHY Module", DESCR: "CLC Upstream PHY Module 3/2"
PID: CBR-D30-US-MOD
NAME: "sup 1", DESCR: "Cisco cBR CCAP Supervisor Card"
PID: CBR-CCAP-SUP-60G
NAME: "harddisk 5/1", DESCR: "Hard Disk"
PID: UGB88RTB100HE3-BCU-DID, VID:
NAME: "sup-pic 5/1", DESCR: "Cisco cBR CCAP Supervisor Card PIC"
PID: CBR-SUP-8X10G-PIC , VID: V01, SN: CAT1720E0F4
NAME: "SFP+ module 5/1/0", DESCR: "iNSI xcvr"
PID: SFP+ 10GBASE-SR
NAME: "SFP+ module 5/1/1", DESCR: "iNSI xcvr"
PID: SFP+ 10GBASE-LR
service.
, VID: V01, SN: FXS1739Q0PR
, VID: V01, SN: TEST1234567
, VID: V01, SN: CAT1725E1BZ
, VID: V01, SN: CAT1725E1AT
, VID: V01, SN: CAT1717E0FF
, VID: V01, SN: CAT1824E0MT
, VID: A
, VID: A
Cisco cBR Series Converged Broadband Routers Application—Voice and Video Configuration Guide
, SN: 11000066829
, SN: FNS172720X6
, SN: UGT085P
Retrieving the Unique Device Identifier
3

Advertisement

Table of Contents
loading

Table of Contents