Cisco ASR 9000 Series Configuration Manual page 400
Aggregation services router
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Creating a Virtual Link with MD5 Authentication to Area 0 for OSPF
If you decide to configure plain text authentication or no authentication, see the authentication command
Note
provided in OSPF Commands on Cisco ASR 9000 Series Router module in Cisco ASR 9000 Series
Aggregation Services Router Routing Command Reference.
SUMMARY STEPS
1. Do one of the following:
2. configure
3. Do one of the following:
4. router-id { router-id }
5. area area-id
6. virtual-link router-id
7. authentication message-digest
8. message-digest-key key-id md5 { key | clear key | encrypted key }
9. Repeat all of the steps in this task on the ABR that is at the other end of the virtual link. Specify the same
key ID and key that you specified for the virtual link on this router.
10. commit
11. Do one of the following:
DETAILED STEPS
Command or Action
Step 1
Do one of the following:
• show ospf [ process-name ]
• show ospfv3 [ process-name ]
Example:
RP/0/RSP0/CPU0:router# show ospf
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
372
• show ospf [ process-name ]
• show ospfv3 [ process-name ]
• router ospf process-name
• router ospfv3 process-name
• show ospf [ process-name ] [ area-id ] virtual-links
• show ospfv3 [ process-name ] virtual-links
Purpose
(Optional) Displays general information about
OSPF routing processes.
• The output displays the router ID of the local
router. You need this router ID to configure
the other end of the link.
Implementing OSPF
OL-30423-03
Advertisement
Table of Contents
