hit counter script

Advertisement

Quick Links

User Manual
GETTING
STARTED?
EASY.
ZWF 01486ZS
EN User Manual
Washing Machine

Advertisement

Table of Contents
loading

Summary of Contents for Zanussi ZWF 01486ZS

  • Page 1 User Manual GETTING STARTED? EASY. ZWF 01486ZS EN User Manual Washing Machine...
  • Page 2: General Safety

    SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. CHILDREN AND VULNERABLE PEOPLE SAFETY This appliance can be used by children aged from 8 years and •...
  • Page 3: Safety Instructions

    Before maintenance, deactivate the appliance and disconnect • the mains plug from the mains socket. Do not use water spray and steam to clean the appliance. • Clean the appliance with a moist soft cloth. Only use neutral • detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
  • Page 4: Product Description

    DISPOSAL • Cut off the mains cable and discard it. • Remove the door catch to prevent children and WARNING! Risk of injury or pets to get closed in the appliance. suffocation. • Disconnect the appliance from the mains supply. PRODUCT DESCRIPTION APPLIANCE OVERVIEW Worktop...
  • Page 5 EASY START CONTROL PANEL DESCRIPTION Quick Cottons Prewash Cotton Easy Iron Synthetics Options Rinse Only Delicates Drain & Spin Wool/Handwash Duvets Finish At Spin Temp. Mixed Fabrics On/Off On / Off button (On/Off) Start/Pause touchpad Programme selection touchpad Options selection touchpad Display Temperature touchpad Spin selection touchpad...
  • Page 6: Programme Chart

    : Cold water indicator • : The alarm codes : The permanent extra rinse indicator • : The message of error C) The spin area: • : Programme is completed. • : The spin speed indicator : The door locked indicator •...
  • Page 7 Maximum load Programme Programme description Maximum spin Temperature range (Type of load and soil level) speed Mixed Fabrics 2 kg Special programme for cotton, synthetic and mixed 60°C - Cold 1200 rpm fabrics with light soil. In case of setting cold wash cycle make sure to use the detergent designed for low tempera- tures.
  • Page 8: Consumption Values

    CONSUMPTION VALUES The data of this table are approximate. Different causes can change the data: the quantity and type of laundry, the water and ambient temperature. At programme start the display shows the duration programme for the maximum load ca- pacity.
  • Page 9 OPTIONS The related indicator comes on. TEMPERATURE With this option you can change the default PREWASH temperature. With this option you can add a prewash phase to a Indicator = cold water. washing programme. The indicator of the set temperature comes on. Use this option for heavy soil.
  • Page 10: Before First Use

    The related indicator comes on. SETTINGS EXTRA RINSE This option stays active even when you With this option you can permanently have an extra switch off the appliance. rinse when you set a new programme. • To activate/deactivate this option touch the ACOUSTIC SIGNALS buttons at the same time until the...
  • Page 11: Daily Use

    DAILY USE Compartment for liquid additives WARNING! Refer to Safety chapters. (fabric conditioner, starch). CAUTION! Do not LOADING THE LAUNDRY exceed the MAX Open the water tap. Connect the mains plug to the level. mains socket. 1. Pull the door handle to open the appliance Flap for powder or liquid deter- door.
  • Page 12 When the flap is in posi- After approximately 15 minutes from tion B and you want to the start of the programme: use powder detergent: • The appliance adjusts automatically 1. Remove the drawer. the programme duration agree with 2. Adjust the flap in po- the laundry load.
  • Page 13 INTERRUPTING A PROGRAMME AND • Remove the laundry from the appliance. Make CHANGING THE OPTIONS sure that the drum is empty. You can change only some options before they • Press the button for some seconds to operate. deactivate the appliance. •...
  • Page 14: Hints And Tips

    The display shows the end of the last set Touch the button if you want to set a new programme. cycle. HINTS AND TIPS THE LAUNDRY LOAD – powder detergents for delicate fabrics (40 °C max) and woollens, • Divide the laundry in: white, coloured, –...
  • Page 15 • Remove the laundry from the drum. CAUTION! Do not use alcohol, • Set the cotton programme with the highest solvents or chemical products. temperature with a small quantity of detergent. DOOR SEAL DESCALING Regularly examine the If the water hardness in your area is high or seal and remove all ob- moderate, we recommend that you use a water jects from the inner part.
  • Page 17: Troubleshooting

    CLEANING THE INLET HOSE AND THE VALVE FILTER 45° 20° EMERGENCY DRAIN 2. Remove the water inlet hose. 3. Remove the drain hose from the rear support Because of a malfunction, the appliance cannot and unhook it from sink or spigot. drain the water.
  • Page 18 • - No communication between electronic elements of the appliance. Switch off and switch on again. WARNING! Deactivate the appliance before you do the checks. • - The mains supply is unstable. Wait until the mains supply is stable. POSSIBLE FAILURES Problem Possible solution The programme does not...
  • Page 19 Problem Possible solution The spin phase does not • Adjust manually the items in the tub and start the spin phase again. operate or the washing cy- This problem may be caused by balance problems. cle lasts longer than usual- •...
  • Page 20: Technical Data

    TECHNICAL DATA Dimension Width/ Height/ Depth/ To- 600 mm/ 850 mm/ 600 mm/ 660 mm tal depth Electrical connection Voltage 230 V Overall power 2200 W Fuse 10 A Frequency 50 Hz Level of protection against ingress of solid particles and IPX4 moisture ensured by the protective cover, except where the low voltage equipment has no protection against...
  • Page 24 WWW.ZANUSSI.COM/SHOP...

Table of Contents